• 생명과학회지
• /
• 제28권8호
• /
• pp.985-991
• /
• 2018

생물시계(Biological clock)는 생명체에서 나타나는 반복되는 자율적인 리듬을 말하며, 단일세포는 물론 다세포 생명체의 기본적인 대사와 이에 따른 표현형과 행동을 직접적으로 조절하고 있다. 이러한 생물시계는 동면 리듬, 수면 리듬, 심장박동 리듬 및 짝짓기 노래 리듬 등 매우 다양하며, 24시간 이상의 주기를 infradian rhythm, 24시간 주기를 circadian rhythm, 24시간 이내의 짧은 주기를 ultradian rhythm으로 구분한다. 효모 Saccharomyces cerevisiae는 최소 5종 이상의 반복되는 자율적인 리듬이 알려져 있으며, 이중 일부는 생체시계로 인식되고 있다. 본 리뷰에서는 Saccharomyces cerevisiae의 glycolytic oscillation (T= 1~30분), cell cycle-dependent oscillation (T= 2~16 시간), ultradian metabolic oscillation (T= 15~50분), yeast colony oscillation (T= 수 시간) 및 circadian oscillation (T= 24시간)에 대한 연구 결과를 제시하고, 특히 ultradian metabolic oscillation의 특징, 집단 동조인자(population synchronizer), 동조인자의 조절 기작 및 효모 생물시계의 대사공학 분야의 이용성을 제시하여 효모를 이용한 동적 대사조절 및 생물시계 연구가 가능함을 제시하였다.

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.729-738
• /
• 2010

질소로 희석된 부탄 층류 부상 화염에서 발생할 수 있는 화염진동 메커니즘을 살펴보기 위하여 실험적 연구를 수행하였다. 화염 진동은 층류 자유제트 부상 화염에서 5가지 영역으로 구분되었다: 화염 안정화 영역 (I), 열손실에 의한 진동 (II), 열손실에 의한 진동과 부력에 의한 진동이 혼재된 영역 (III),열손실에 의한 진동과 화염날림 직전의 진동이 혼재된 영역 (IV), 그리고 열손실에 의한 진동, 부력에 의한 진동 및 화염날림 직전의 진동이 모두 혼재된 영역(V). 각각의 화염진동의 특성을 규명하기 위해 화염의 시간에 따른 부상 높이 변화에 대한 FFT분석을 수행하였고 각 영역에 관련된 무차원 변수와 스트라훌 수의 조합으로 특성화 작업을 수행하였다.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.996-1002
• /
• 2006

Experiments in methane-air low strain rate counterflow diffusion flames diluted with nitrogen have been conducted to study the behavior of flame extinction and edge flame oscillation in which flame length is less than the burner diameter and thus lateral conduction heat loss in addition to radiative heat loss could be remarkable at low global strain rates. Critical mole fraction at flame extinction is examined with velocity ratio and global strain rate. Onset conditions of edge flame oscillation and flame oscillation modes are also provided with global strain rate and added nitrogen mole fraction to fuel stream (fuel Lewis number). It is seen that flame length is closely relevant to lateral heat loss, and this affects flame extinction and edge flame oscillation considerably. Edge flame oscillations in low strain rate flames are experimentally described well and are categorized into three: a growing oscillation mode, a decaying oscillation mode, and a harmonic oscillation mode. The regime of flame oscillation is also provided at low strain rate flames. Important contribution of lateral heat loss even to edge flame oscillation is clarified

• 한국지구과학회지
• /
• 제38권6호
• /
• pp.427-441
• /
• 2017

Theory of Earth's free oscillation is revisited. Firstly, we summarized the underlying formulations, such as the equation of motion and its conversion into numerically integrable form and then explained computational procedures including the treatment of inner core-outer core boundary and core-mantle boundary, while the latter information has not been explicitly given in most publications. Secondly, we re-calculated the periods of Earth's free oscillation modes (period >200 s) for PREM model. In doing so we acquired the values of modes missing in Dziewonski and Anderson (1981). As a case observation, one seismogram after 2011 Tohoku earthquake recorded at Daejeon, Korea (KIGAM seismic station) was briefly analyzed to identify free oscillation mode excitations on its spectra. The material in this article will be most clear guide for those on calculating the Earth's free oscillation mode.

• 전기전자학회논문지
• /
• 제6권2호
• /
• pp.128-135
• /
• 2002

선형 플랜트의 극한 이득과 주기를 찾기 위해 포화함수를 이용하여 자기 진동을 발생 시켰다. 포화함수 사용으로 극한이득과 주기의 정확성을 높였다. 발견한 극한 이득과 극한 주기는 PID 제어기 값을 구하는데 사용하였다. 정적인 부하 왜란 등이 있는 경우 비대칭 진동이 발생할 수 있다. 발생하는 비대칭 자기 진동을 분석하였고 분석결과로부터 극한 이득과 주기를 찾는 방법을 제안하였다.

• 한국광학회지
• /
• 제14권1호
• /
• pp.80-84
• /
• 2003

두 가지의 다른 방법으로 광섬유를 직접 구동하여 공초점 현미경을 제작하였다. 압전소자와 튜닝 포크는 광섬유를 진동시키는데 사용하였다. 6 frame의 640$\times$480 픽셀 영상을 압전소자 진동으로 1초 동안 얻었고, 1 frame의 640$\times$480 픽셀 영상을 튜닝 포크 진동으로 1초 동안 얻었다 이러한 광섬유의 진동은 confocal 영상에 일그러짐을 주지 않았다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.671-677
• /
• 2015

A novel phase interpolator (PI) based linear model of multipath ring oscillator (MPRO) is described in this paper. By modeling each delay cell as an ideal summer followed by a single pole RC filter, the oscillation frequency is derived for a 4-stage differential MPRO. It is analytically proved that the oscillation frequency increases with the growth of the forwarding factor ${\alpha}$, which is also confirmed quantitatively through simulation. Based on the proposed model, it is shown that the power to frequency ratio keeps constant as the speed increases. Running at the same speed, a 4-stage MPRO can outperform the corresponding single-stage ring oscillator (SPRO) with 27% power saving, making MPRO with a large forwarding factor ${\alpha}$ an attractive option for lower power applications.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1859-1868
• /
• 2004

Monitoring of OH chemiluminescence through an optical fiber was demonstrated to be a useful method in detecting self-excited combustion oscillations. OH chemiluminescence intensity detected by the optical fiber showed mostly excellent agreement with those obtained by high speed CCD camera measurements when combustion oscillations were strong. Symptoms of self-excited combustion oscillation were also studied in order to predict the onset of combustion oscillation before it proceeded to a catastrophic failure. For the purpose, we have found and proposed unique measures to tell the onset of self-excited combustion oscillations based on the careful statistics of fluctuating properties in flames, such as pressure or emission of OH radicals.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.387-392
• /
• 2002

A portable mould oscillation analyzer with an integrated computer, developed by POSCO, records the movement of the mould in every spatial direction. The system uses the gap sensors to measure the mould movement (displacement) in two horizontal directions according to the mould narrow and broad faces and the vertical strokes in the four corners of mould. The gap sensor is a non-contacting minute displacement-measuring device using the principle of high frequency eddy current loss. The mould oscillation diagnostic system integrates the gap sensors, their converters and the industrial portable computer with plug-in data acquisition boards. In an own expert module, which is included in the diagnosis program, one can obtain much information about the mould oscillation equipment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.621-626
• /
• 1997

Combustion instability is a common phenomenon in a ducted flame burner and is known as accompanying low frequency oscillation. This is due to the interaction between unsteady heat release rate and sound pressure field, that is, thermoacoustic feedback. In Rayleigh criterion, combustion instability is triggered when the heat additions is in phase with acoustic oscillation. A Rijke type burner with a pre-mixed flame is built for investigating the effect of Reynolds number and equivalence ratio on thermoacoustic oscillation. In addition, the effect of wall temperature is presented. The results suggest that the frequency of max. oscillation is dependent on Reynolds number and equivalence ratio whereas its magnitude is not a strong function of these two parameters. On the other hand, the wall temperature distribution has much strong effects on the oscillation, even creates different mode of acoustic resonance.