• Structural Engineering and Mechanics
• /
• 제32권4호
• /
• pp.549-561
• /
• 2009

As it is known, laminated composite materials are increasingly used in many technological applications, and in some instance, cutouts must be made into laminated panels for practical reasons, changing the stress distribution. The present study deals with the determination of the stress concentration factor that holes of square shape cause in an orthotropic plate subjected to distributed in - plane loading. Square holes of rounded corners in a rectangular plate are considered, and the effect of different combinations of axial and tangential forces applied to its middle plane at the external edges, is studied. The mutually perpendicular axes, which define the principal axes of orthotropy, are assumed in many different directions referred to the sides of the plate. Numerical experiments by means of a finite element code is performed, evaluating the influence of the fiber orientation with respect to the edges of the plate and the characteristics of the orthotropic materials since such structures do not exhibit easily predictable behavior.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.923-937
• /
• 2014

The rational finite element method is different from the standard finite element method, which is constructed using basic solutions of the governing differential equations as interpolation functions in the elements. Therefore, it is superior to the isoparametric approach because of its obvious physical meaning and accuracy; it has successfully been applied to the isotropic elasticity problem. In this paper, the formulation of rational finite elements for plane orthotropic elasticity problems is deduced. This method is formulated directly in the physical domain with full consideration of the requirements of the patch test. Based on the number of element nodes and the interpolation functions, different approaches are applied with complete polynomial interpolation functions. Then, two special stiffness matrixes of elements with four and five nodes are deduced as a representative application. In addition, some typical numerical examples are considered to evaluate the performance of the elements. The numerical results demonstrate that the present method has a high level of accuracy and is an effective technique for solving plane orthotropic elasticity problems.

• 한국강구조학회 논문집
• /
• 제14권3호
• /
• pp.395-402
• /
• 2002

본 연구는 강상판교량의 합리적인 설계를 위한 다목적 최적설계 방법을 제안하였다. 다목적 최적설계 방법은 기존의 제작비용만을 목적함수로 사용하는 최적설계와는 달리 제작비용과 처짐을 동시에 고려함으로써 보다 합리적인 설계를 유도하고자 하였다. 강상판교량은 많은 부재를 가지고 있고 구조거동이 복잡한 이유로 기존의 최적설계 알고리즘을 이용하면 매우 비효율적이다. 따라서, 매우 효율적인 다단계 최적설계를 이용하였다. 강상판교량의 합리적이고 경제적인 설계를 위해 최적의 제작비용과 처짐과의 관계를 파레토 곡선으로 표현하고 이를 이용하여 합리적인 설계 수준을 정하는 척도로 사용하였다. 이러한 방법은 기존의 단일목적 최적설계에 비해 매우 합리적인 설계결과를 얻을 수 있었다.

• 전산구조공학
• /
• 제8권4호
• /
• pp.117-127
• /
• 1995

이 연구의 목적은 단조하중과 반복하중을 받는 철근콘크리트 면부재 해석에 대한 이방향성 회전 직교축 모델의 성능을 검토하기 위함이다. 여기서 다루는 구조부재는 철근에 의하여 적절히 보강된 보, 기둥, 보-기둥 접합부, 그리고 전단벽등으로 부재의 파괴가 인장균열후 압축파괴에 의하여 일어나는 부재이다. 보통 단조하중에 대하여 사용도는 이방향성 회전 직교축 모델을 반복하중에 대하여 확장하며, 철근과 부착의 기존 재료모델과 함꼐 유한요소해석에 사용한다. 단조하중에 대하여 이방향성 회전 직교축 모델을 사용한 해석 결과는 취성파괴를 나타내는 철근콘크리트보의 실험결과와 비교된다. 또한 반복하중을 받는 전단벽의 극한하중, 비선형 변형, 핀칭 현상 등에 대하여 실험결과와 비교된다.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.313-330
• /
• 1993

The propagating crack problems under dynamic plane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems in orthortropic material, it is important to know the dynamic stress components and dynamic displacement components around the crack tip. Therefore the dynamic stress components of dynamic stress field and dynamic displacement components of dynamic displacement field in the crack tip of orthotropic material under the dynamic load and the steady state in crack propagation were derived. When the crack propagation speed approachs to zero, the dynamic stress component and dynamic displacement components derived in this study are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determinded by using the concept of crack closure closure energy with the dynamic stresses and represented according to physical properties of the orthotrophic material and crack speeds. The faster the crack velocity, the greater the stress value of stress components in crack tip. The stress value of the stress component of crack tip is greater when fiber direction coincides with the crack propagation than when fider direction is normal to the crack propagation.

• 소음진동
• /
• 제8권5호
• /
• pp.974-980
• /
• 1998

본 논문은 직교이방성 탄성계에서 내부 선형하중에 의한 탄성파의 거동을 고찰하였다. 첫째로, 내부 발진원에 대한 탄성과 거동식을 무한계와 반구계에서의 직교이방성 매체에서 유도하였고, 둘째로 Cargniard-DeHoop을 이용하여 순간선형하중에 대한 무한계와 반구계에서의 탄성과 거동식을 유도하였다. 반구계에서 탄성파에 대한 거동식은 무한계에서 유도한 결과와 반구의 표면에서 분산되는 반사파의 합으로 표현되고, 경계영역에서 경계조건을 만족하였다. 여러 가지 이방성 매체에 대한 수치해석 결과를 제시하였고, 이방성 매체의 특성인 bulk wave의 Lacunae 및 표면파의 영향을 고찰할 수 있었다. 본 논문의 결과는 지진연구, 복합소재 특성 연구, 지능형소재 특성연구 등에 응용될 것이다.

• 한국안전학회지
• /
• 제31권6호
• /
• pp.6-11
• /
• 2016

CFRP composite laminates are widely used as structural materials for airplanes, automobile and aerospace vehicles because of their high strength and stiffness. This study aims to examine an effect of curvature on the penetration fracture characteristic of an orthotropic composite laminated shell. For the purpose, we manufactured orthotropic CFRP shell specimen with different curvatures, and conducted a penetration test using an air-gun. Those specimens were prepared to varied curvature radius(${\infty}$, 200mm, 150mm and 100mm)and were stacked to $[O^{\circ}{_3}/90^{\circ}{_3}]_s$. When the specimen is subjected to transverse impact by a steel sphere(${\Phi}10$), the velocity of steel sphere was measured both before and after impact by determining the time for it to pass two ball-screen sensors located a known distance apart. As the curvature increases, the absorption energy and the critical penetration energy increased linearly because the resistance to the bending moment. Patterns of cracks caused by the penetration of CFRP laminated shells included fiber breakage, lamina fracture, matrix crack interlaminar crack and intralaminar crack.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.711-719
• /
• 2018

The present work presents a free vibration and buckling analysis of orthotropic plates by proposing a novel two variable refined plate theory. Contrary to the conventional higher order shear deformation theories (HSDT) and the first shear deformation theory (FSDT), the proposed theory utilizes a novel displacement field which incorporates undetermined integral terms and involves only two unknowns. The governing equations are obtained from the dynamic version of principle of virtual works. The analytical solution of a simply supported orthotropic plate has been determined by using the Navier method. Numerical investigations are performed by employing the proposed model and the obtained results are compared with the existing HSDTs.

• Geomechanics and Engineering
• /
• 제16권2호
• /
• pp.141-150
• /
• 2018

In this current work a quasi 3D "trigonometric shear deformation theory" is proposed and discussed for the dynamic of thick orthotropic plates. Contrary to the classical "higher order shear deformation theories" (HSDT) and the "first shear deformation theory" (FSDT), the constructed theory utilizes a new displacement field which includes "undetermined integral terms" and presents only three "variables". In this model the axial displacement utilizes sinusoidal mathematical function in terms of z coordinate to introduce the shear strain impact. The cosine mathematical function in terms of z coordinate is employed in vertical displacement to introduce the impact of transverse "normal deformation". The motion equations of the model are found via the concept of virtual work. Numerical results found for frequency of "flexural mode", mode of shear and mode of thickness stretch impact of dynamic of simply supported "orthotropic" structures are compared and verified with those of other HSDTs and method of elasticity wherever considered.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.491-501
• /
• 2020

Microtubules buckle under bending and torsion and this property has been studied for free microtubules before using orthotropic elastic shell model. But as microtubules are embedded in other elastic filaments and it is experimentally showed that these elastic filaments affect the critical buckling moment and critical buckling torque of the microtubules. To prove that, we developed orthotropic Winkler like model and demonstrated that the critical buckling moment and critical buckling torque of the microtubules are orders of higher magnitude than those found for free microtubules. Our results show that Critical buckling moment is about 6.04 nNnm for which the corresponding curvature is about θ = 1.33 rad /㎛ for embedded MTs, and critical buckling torque is 0.9 nNnm for the angle of 1.33 rad/㎛. Our results well proved the experimental findings.