• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.277-278
• /
• 2008

Orthorhombic $LiMnO_2$(o-$LiMnO_2$) has attracted public attentions as a cathode materials of Lithium ion battery because it has low cost and high theoretical discharge capacity of 285mAh $g^{-1}$. In our study, o-$LiMnO_2$ is synthesized by quenching method. To verify their phase structure, X-ray diffraction is accomplished. Test cells are assembled to check electrochemical characteristics using acquired o-$LiMnO_2$ cathode and carbon anode. Charge/Discharge cycling was carried out for 50cycles. And impedance was measured at 1, 2, 5, 10, 30, 50cycle. During cycle test, the max discharge capacity was recorded 139mAh $g^{-1}$ at 10cycle.

• Bulletin of the Korean Chemical Society
• /
• 제6권1호
• /
• pp.29-32
• /
• 1985

Normal modes of crystalline orthorhombic sulfur belonging to the space group $D_{2h}$-Fddd, have been evaluated by taking the lowest temperature phase in the solid. Normal modes are obtained by the valence force field with modified force constants and a quantitative description of the mode is adjusted by the potential energy distribution. Since the full crystal system of orthorhombic sulfur is so large, we intended to calculate the normal modes simply by constructing the imaginary box made by the infinite mass boundary. And the Raman experiment is done by using the more powerful Ar-Kr gas laser with lowering the temperature to ${\sim}10^{\circ}K$.

• 자원환경지질
• /
• 제32권4호
• /
• pp.399-409
• /
• 1999

Mullitization of kaolinite and dickite was examined with special attention to the influence of polytypism and impurities on the phase transformation. The phase transformation sequence in dickite is identical with that in kaolinite except that cristobalite is crystallized at $50^{\circ}C$ higher temperature in dickite. Difference in phase transformation above $1000^{\circ}C$ in kaolin minerals is attributed to the different crystal structures of metadickite and metakaolinite on the effect of impurities. A part of quartz is transformaed into cristobalite. Spinel-type phase produced in disordered kaolins including illite occurs over a short range of temperatures. Primary mullite is transformed into orthorhombic mullite at higher temperature as well. These results sustain the idea that disintegration of methkaolin and the spinel-type phase supplies extra sillica and promotes the growth of mullite cristobalite.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.677-683
• /
• 1990

Melt-textured growth of the YBa2Cu3O7-x phase from a supercooled melt created locally aligned, barshaped grains of the orthorhombic 1-2-3 phase. Based on all the observed phenomena, the gross mechanism of the melt-textrued growth of YBa2Cu3O7-x on the (100) plane of MgO was delineated by three basic patterns of reactions. These are : (ⅰ) formation of the aligned 1-2-3 phase and the Y-rich 2-1-1 phase at the bulk region away from the (100) plane of MgO ; (ⅱ) formation of the Cu-richprecipitates at the interfacial region by the selective interface-induced precipitation of the liquid phase ; (ⅲ) condensation reaction of the entrapped Cu-rich vapor with Mg atoms during the initial stage of rapid cooling from 130$0^{\circ}C$ to 98$0^{\circ}C$.

• 센서학회지
• /
• 제7권6호
• /
• pp.386-393
• /
• 1998

비선형광학 단결정 KTP에 대해 고온 분말 X-선 회절실험과 복소 유전상수 측정실험 등을 수행하였다. 고온분말 X-선 회절 실험 결과를 Lipson과 Cohen의 해석적 방법을 사용하여 분석하였으며, 그 결과 $900^{\circ}C$ 이하의 온도에서는 어떠한 구조상전이도 없음을 확인하였다. 그리고 KTP는 $900^{\circ}C$ 이상에서 구조상전이가 있으며, 상전이 온도 이상의 온도영역에서도 직방정계(orthorhombic)에 속함을 확인하였다. 한편, 복소 유전상수 측정결과를 현상론적인 유전완화식에 적용하였으며, 이로부터 $K^+$ 이온의 hopping에 의한 KTP의 유전완화 mechanism은 $-78^{\circ}C$부터 $200^{\circ}C$까지 단일모드로 Cole-Cole relation을 만족함을 알았다. 이때 완화시간은 Vogel-Fulcher relation을 따르고 있으며, $200^{\circ}C$ 이상의 온도영역에서는 hopping mechanism과 더불어 열적으로 활성화된 확산 mechanism이 KTP의 전도특성을 지배하는 것으로 보인다.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.341-345
• /
• 2012

[Li0.055(K0.5Na0.5)0.945](Nb1-xTax)O3 (0.05 ≤ x ≤ 0.25) ceramics were prepared by the partial sol-gel (PSG) method to improve the microstructure homogeneity of Ta5+ ion and were compared to those prepared by the conventional mixed oxide (CMO) method. For the PSG method, Ta(OC2H5)5 was directly reacted with calcined [Li0.055(K0.5Na0.5)0.945]NbO3 powders and the specimens sintered at 1100 ℃ for 5 hrs showed a single phase with a perovskite structure. Compared to the specimens prepared by conventional mixed oxide powders, the relative ratio of tetragonal phase to orthorhombic phase of the sintered specimens prepared by Ta(OC2H5)5 was larger than that of the sintered specimens prepared by Ta2O5. The electromechanical coupling factor (kp), piezoelectric constant (d33) and dielectric constant (εr) of the sintered specimens were increased with Ta5+ content. These results could be attributed to the decrease of the orthorhombic-tetragonal polymorphic phase transition temperature (To-t), which could be evaluated by oxygen octahedral distortion. Strain of the sintered specimens prepared by the PSG method was higher than that of specimens prepared by the CMO method due to the increase of relative density. The effects of crystal structure on the strain characteristics of the specimens were also discussed.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1182-1186
• /
• 1997

La0.8Ca0.2Cr0.98O3 powder was prepared using the modified Pechini process. Various crystalline phases formed during thermal decomposition were investigated. (La,Ca)CrO4 phase, first formed from the precursor, was transformed to (La,Ca)CrO3 and CaCrO4 above 80$0^{\circ}C$, which remained up to 110$0^{\circ}C$. However, only (La,Ca)CrO3 phase consisting of orthorhombic and intermediate rhombohedral polymorphs was observed after sintering at 125$0^{\circ}C$. The specimens sintered at 140$0^{\circ}C$ exhibited 98% of relative density and rather wide grain size distribution with average grain size of 3-4 ${\mu}{\textrm}{m}$. Densification and grain growth of the specimens observed above 125$0^{\circ}C$ were presumably attributed to liquid phase sintering resulted from melting of Ca3(CrO4)2 phase.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.144-148
• /
• 2000

A modification of the sol-gel method to obtain phase pure superconducting oxides is described. The method starts from organic salts of yttrium, barium and copper, such as acetates, and avoids the sudden and uncontrollable decomposition of the organic fraction which occurs if nitrates are used as starting materials. The aqueous solution obtained with citric acid in an alkaline medium is concentrated under vacuum. The solid so prepared is decomposed at about $300^{\circ}C$ thus giving an oxide precursor containing well dispersed yttrium, barium and copper. Pyrolysis at 850 - $920^{\circ}C$ followed by oxygen annealing gives the superconducting orthorhombic 123 phase. The results of TGA/DTA of the precursor, as well as XRD, electrical and magnetic property measurements on the pyrolysis products are presented and discussed.

• Nuclear Engineering and Technology
• /
• 제4권3호
• /
• pp.203-213
• /
• 1972

$760^{\circ}C에서$ 최고 200시간까지 시효열처리한 Inconel 718 합금의 석출과정을 전자현미경적방법과 X선회절법으로 조사하였다. 이 합금의 주경화상은 작은 석상으로 된, 준안정적인 체심정방계의 $Ni_3Nb상이었며,$ 그밖에 판별된 석출상은 (Ni,T)C와 침상으로 된, 안정상인 사방계의 NifNb상 이었다. 미시효상태에서 전위와 석출상과의 상호작용을 관찰했으며, 그 결과 석출상의 변형과 석출상의 [110]면에 형성된 적층결함층을 관측할 수 있었다.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1729-1734
• /
• 2018

Organic-inorganic halide perovskite single crystals undergo phase transition of being cubic, tetragonal, or orthorhombic depending on the temperature. We investigated the $CH_3NH_3PbBr_{3-x}I_x$ single crystals grown by the inverse temperature crystallization method with temperature-dependent UV-Vis absorption and photoluminescence. From the temperature-dependent absorption measurement, the optical band gap is extracted by derivation of absorption spectrum fitting and Tauc plot. In our results, $CH_3NH_3PbBr_{3-x}I_x$ single crystals show that an abrupt change in optical band gap, PL peak position and intensity appears around 120 K - 170 K regions, indicating the phase transition temperature.