• 한국전문물리치료학회지
• /
• 제21권3호
• /
• pp.1-10
• /
• 2014

The aim of this study was to investigate the effect of hip external rotation angle on pelvis and lower limb muscle activity during prone hip extension. Sixteen healthy men were recruited for this study. Each subject performed an abdominal drawing-in maneuver (ADIM) in a prone position, and extended the dominant hip at three different hip external rotation angles ($0^{\circ}$, $20^{\circ}$, $40^{\circ}$) with a $30^{\circ}$ hip joint abduction. Activity of the gluteus maximus (G Max), gluteus medius (G Med), and hamstring (HAM) and the G Max/HAM and G Med/HAM ratios were determined with surface electromyography (EMG). The EMG signal was normalized to 100% maximum voluntary isometric contractions (MVICs) and expressed as %MVIC. Data were analyzed by one-way repeated analysis of variance (alpha level=.05) and the Bonferroni post hoc test. Significant differences in G Max and G Med muscle activity were noted among the three different hip external rotation angles. G Max muscle activity increased significantly at both $40^{\circ}$ (p=.006) and $20^{\circ}$ (p=.010) compared to a $0^{\circ}$ hip external rotation angle. G Med muscle activity increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. The G Max/HAM activity ratio increased significantly at both $40^{\circ}$ (p=.004) and $20^{\circ}$ (p=.014) compared to a $0^{\circ}$ hip external rotation angle. The G Med/HAM activity ratio increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. In conclusion, $40^{\circ}$ and $20^{\circ}$ hip external rotation angles are recommended to increase G Max activity, and $20^{\circ}$ hip external rotation is advocated to enhance G Med muscle activity during prone hip extension with ADIM and $30^{\circ}$ hip abduction in healthy subjects.

• 한국컴퓨터그래픽스학회논문지
• /
• 제24권4호
• /
• pp.29-38
• /
• 2018

본 논문에서는 무릎 MR 영상에서 반월상 연골의 자동 위치화, 다중 아틀라스 기반 지역적 가중 투표를 통한 반월상 연골 분할 및 패치 기반 윤곽선 특징 분류를 통한 반월상 연골 자동 분할 방법을 제안한다. 첫째, 뼈와 무릎 관절 연골을 분할한 후 이를 이용하여 반월상 연골의 관심볼륨영역을 자동 위치화한다. 둘째, 반월상 연골의 관심볼륨영역에서 형상 및 밝기값 분포 가중치를 고려한 다중 아틀라스 기반 지역적 가중 투표를 통해 반월상 연골을 분할한다. 셋째, 밝기값이 유사한 측부 인대로의 누출을 제거하기 위해 형상 및 거리 가중치를 고려한 패치 기반 윤곽선 특징 분류를 통해 반월상 연골 분함을 개선한다. 제안 방법을 통한 분할 결과와 수동 분할 결과 간 다이스 유사계수는 내측 반월상 연골은 80.13%, 외측 반월상 연골은 80.81%를 보였으며 다중 아틀라스 기반 지역적 가중투표를 통한 분할 방법과 비교하여 내 측 및 외측 반월상 연 골 각각 7.25%, 1.31% 향상되었다.

• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.152-160
• /
• 2011

PURPOSE. This study was to investigate the effects of recombinant human platelet-derived growth factor (rhPDGF-BB) and heparin to titanium surfaces for enhancement of osteoblastic functions and inhibition of inflammation activity. MATERIALS AND METHODS. The anodized titanium discs, not coated with any material, were used as a control group. In heparinized-Ti group, dopamine was anchored to the surface of Ti substrates, and coated with heparin. In PDGF-Ti group, rhPDGF-BB was immobilized onto heparinized Ti surface. The surface morphologies were investigated by the scanning electron microscope in each group. The release kinetics of rhPDGF-BB were analyzed, and cytotoxicity tests for each group were conducted. The biocompatibilities were characterized by measuring cell proliferation, alkaline phosphatase activity, and calcium deposition using MG-63 cells. Statistical comparisons were carried out by one-way ANOVA tests. Differences were considered statistically significant at $^*$P<.05 and $^{**}$P<.001. RESULTS. The combination of rhPDGF-BB and heparin stimulated alkaline phosphatase activity and OCN mRNA expression in osteoblastic cells ($^*$P<.05 and $^{**}$P<.001). MG-63 cells grown on PDGF-Ti had significantly higher amounts of calcium deposition than those grown on anodized Ti ($^{**}$ P<.001). Heparinized Ti was more anti-inflammatory compared to anodized Ti, when exposed to lipopolysaccharide using the transcript levels of TNF-${\alpha}$ and IL-6 of proinflammatory cytokine ($^*$P<.05 and $^{**}$P<.001). CONCLUSION. The result of this study demonstrated that the incorporation of rhPDGF-BB and heparin onto Ti surface enhanced osteoblastic functions and inhibited inflammation.

• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.145-151
• /
• 2011

PURPOSE. This study was performed to investigate the ability of recombinant human-bone morphogenic protein-2 immobilized on a heparin-grafted bone substrate to enhance the osteoblastic functions. MATERIALS AND METHODS. The Bio-$Oss^{(R)}$, not coated with any material, was used as a control group. In rhBMP-2-Bio-$Oss^{(R)}$ group, rhBMP-2 was coated with Bio-$Oss^{(R)}$ using only deep and dry methods (50 ng/mL, 24 h). In heparinized rhBMP-2-Bio-$Oss^{(R)}$ group, dopamine was anchored to the surface of Bio-$Oss^{(R)}$, and coated with heparin. rhBMP-2 was immobilized onto the heparinized- Bio-$Oss^{(R)}$ surface. The release kinetics of the rhBMP-2-Bio-$Oss^{(R)}$ and heparinized rhBMP-2-Bio-$Oss^{(R)}$ were analyzed using an enzyme-linked immunosorbent assay. The biological activities of the MG63 cells on the three groups were investigated via cytotoxicity assay, cell proliferation assay, alkaline phosphatase (ALP) measurement, and calcium deposition determination. Statistical comparisons were carried out by one-way ANOVA test. Differences were considered statistically significant at $^*$P<.05 and $^{**}$P<.001. RESULTS. The heparinized rhBMP-2-Bio-$Oss^{(R)}$ showed more sustained release compared to the rhBMP-2-Bio-$Oss^{(R)}$ over an extended time. In the measurement of the ALP activity, the heparinized group showed a significantly higher ALP activity when compared with the non-heparinized groups (P<.05). The MG63 cells cultivated in the group with rhBMP-2 showed increased calcium deposition, and the MG63 cells from the heparinized group increased more than those that were cultivated in the non-heparinized groups. CONCLUSION. Heparin increased the rhBMP-2 release amount and made sustained release possible, and heparinized Bio-$Oss^{(R)}$ with rhBMP-2 successfully improved the osteoblastic functions.

• 성인간호학회지
• /
• 제12권2호
• /
• pp.196-208
• /
• 2000

The purpose of the study was to explore the effect of 2 hour infusion of vancomycin(1g) in 200ml of isotonic saline every 12 hour on the frequency of "red man syndrome", phlebitis and length of peripheral catheter placement of infected patients, in order to provide safe infusion method for reducing vancomycinin-duced RMS and phlebitis. The subjects of the study consisted of 16 hospitalized patients; 3 oncology and gastro-intestinal patients, 1 neurological patient, 6 thoracic surgical patients and 6 orthopedic patients, who had received vancomycin from July to October in 1999 at S-hospital. The dependent variables were the incidence of RMS, phlebitis and the length of peripheral catheter placement. The incidence of RMS was checked by an inspector at the first night whenever the infusion method of vancomycin was changed. RMS was observed every 15 minutes during an hour for symptoms of RMS such as itching, erythema, chest pain and systolic blood pressure. Incidence of phlebitis was assessed by inspector twice a day from the insertion of peripheral catheter to the removal of the catheter. The data were analyzed by percentage, mean, $X^2$-test, t-test, repeated ANOVA, and logistic regression analysis using the SPSSWIN program. The results are summarized as follows; 1. No significant difference was identified in frequency of RMS between the experimental group and control group. 2. There was no significant difference in the change of systolic blood pressure as the time goes on between the experimental group and control group. 3. The incidence of phlebitis was significantly lower in the experimental group than in the control group. 4. The length of peripheral catheter placement was significantly longer in the experimental group than in the control group. 5. Other drugs administrated with vancomycin didn't influence the occurrence of phlebitis. However, the infusion method of vancomycin influenced the occurrence of phlebitis. The results suggest that 2 hour infusion of vancomycin(1g) in 200ml of isotonic saline every 12 hours may decrease the incidence of phlebitis and increase the length of peripheral catheter placement compared to 1 hour infusion of vancomycin(1g) in 100ml of isotonic saline every 12 hours. However, it does not reduce the incidence of RMS.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.167-177
• /
• 2013

최근 미세혈관 문합수술 시 봉합사 대신 기계식 문합커플러를 사용하는 수술례가 증가하고 있다. 그러나 기존의 비분해성 문합커플러는 염증반응 뿐만 아니라 수술 후 영구적으로 인체 내에 잔존한다는 한계성이 있다. 따라서 본 연구에서는 기존 비분해성 문합커플러의 한계성을 극복하기 위해 사출성형공정을 이용한 생분해성 PCL 문합커플러 제작을 채택하였다. 사출성형 공정조건 중 실린더온도와 사출압력에 따른 수축률을 계산하고 이에 따른 문합강도를 측정하였다. 그 결과 핀보다는 홀 파트의 수축률 변화가 크게 나타났다. 또한 수축률은 실린더온도가 상승할수록 증가하였으나 반대로 사출압력이 높아질수록 감소하는 경향이 나타났다. PCL 문합 커플러의 in-vitro 분해거동을 12주간 평가한 결과, 수분흡수는 증가하고 분자량은 감소하여 생체분해를 동반한 질량 및 문합강도의 감소를 확인할 수 있었다. 그러나 문합강도의 저하 수준이 전임상 요구조건을 충분히 상회하기에 PCL 문합커플러는 미세혈관수술에 적합한 후보재료임을 파악할 수 있었다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.153-165
• /
• 2013

기존의 보행분석 연구들은 하지를 하나의 스프링으로 간주하였다. 만약 슬관절 신전을 보조할 수 있는 슬관절 액추에이팅 메커니즘을 개발할 수 있다면 보행에 필요한 탄성-변형률에너지를 혁신적으로 저장-방출할 수 있고, 그 결과 보행 중 하지강성은 더욱 증가할 것이다. 게다가 족관절 액추에이팅 메커니즘까지 추가되어 있다면 슬관절 액추에이터에 의한 과도한 인공하지강성을 능동적이고 적절한 수준으로 보상해주는 기전으로 작동할 것이다. 만약 가속도에 의한 보행속도 증가를 방지하기 위해 인위적 감속통제를 작동시킨다면 불필요한 운동에너지의 방출이 발생되고 하지강성 액추에이터의 실효성은 의심을 받게 된다. 따라서 본 저자는 보행속도를 2개의 세그먼트에 의한 상대 각속도 조절기법을 이용하여 하지강성을 증가시킨다는 기본개념으로 슬-족관절 액추에이터 시스템을 개발하였다. 또한 족관절에 슬관절 액추에이팅에 대한 보상기전이 존재하는 경우, 족관절의 보상기전이 중족지절관절 경사각 및 보행속도 변화에 미치는 상호영향을 연구하였다.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.363-379
• /
• 1990

The purpose of this study was to evaluate the effects of the mandibular retractive force on the mandibular condyle of growing dog. The experimental animals were six mongrel dogs of two-month old. Their deciduous dentition were completed. Two of them was used as control group, and experimental group was composed of remaining four. Head band and chin cup were made of cotton tape, and hooks are fabricated on the chin cup and had band for closed coil. Mandibular retractive force was 100g/side and chin cap appliance was used for 14 hours/day during night. Experimental group were sacrificed at 2, 4, 6, 8 weeks from beginning of the experiment. Right TMJ was prepared for histologic study and left TMJ was examined grossly for disc, fossa, and condyle. The conclusions are: 1. Two-month old control animal showed active cartilaginous growth on the mandibular condyle, therefore showed thick proliferative and hypertrophic zones. Remodeling process in the condyle head was observed in which there were bone resorption on the anterior surface and bone apposition on the posterior surface. 2. Four-month old control animal showed marked reduction of hypertrophic zone but the condylar bone remodeling was more pronounced. 3. In experimental group, there are marked reduction of hypertrophic zone at 4 weeks from beginning of experiment, and hypertrophic zone disappeared at posterior-superior portion of condyle in 6-week experimental animal. 8 week experimental animal showed slight recovery of hypertrophic zone. 4. In experimental group, bone deposition was increased at anterior surface of condyle, and bone resorption was increased at posterior surface of condyle. 5. In control group, the glenoid fossa and surrounding bone showed mainly bone apposition. But experimental group showed bone resorption at anterior surface of articular eminence and increased bone apposition at posterior surface of postglenoid spine. 6. No marked traumatic change was seen but 4 weeks and 8 weeks experimental animal showed flattening of posterior surperior condylar surface. Bone marrow of condyle showed minute focal bleeding in 2 weeks and 4 weeks experimental animal, and congestion and depression of hematopoietic bone marrow during all experimental period.

• BMB Reports
• /
• 제37권6호
• /
• pp.691-699
• /
• 2004

Osteoporosis is a disease characterized by exaggerated loss of bone mass, with as much as 50 to 85% of the variation in bone mineral density (BMD) commonly accepted as being genetically determined. Although intensive studies have attempted to elucidate the genetic effects of polymorphisms on BMD and/or osteoporosis in several genes, the genes involved are still largely unknown. The possible associations of genetic variants in five-candidate genes (IL10, CCR3, MCP1, MCP2 and GC) with spinal BMD were investigated in Korean postmenopausal women (n = 370). Fourteen SNPs in five candidate genes were genotyped, and the haplotypes of each gene constructed. The associations of adjusted spinal BMD by age, year since menopause (YSM) and body mass index (BMI), with genetic polymorphisms, were analyzed using multiple regression models. Genetic association analysis of Korean postmenopausal women revealed that IL10 -592A > C and/or IL10 ht2 were associated with decreased bone mass, whereas no significant associations were observed with all polymorphisms in other genes. The levels of spinal BMD in individuals bearing the IL10 -592CC genotype were lower ($0.78{\pm}0.16$) than those in others ($0.85{\pm}0.17$) (P = 0.02), and the BMD of IL10 ht2 bearing individuals were also lower ($0.82{\pm}0.15$) than those in others ($0.85{\pm}0.17$) (P = 0.04). Our results suggest that variants of IL10 might play a role in the decreased BMD, although additional study might need to be followed-up in a more powerful cohort.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.