• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.139-146
• /
• 2018

Underwater acoustic communication can be applied to various area such as scientific, commercial and military survey using Autonomous Underwater Vehicles and Unmanned Underwater Vehicles. Underwater communication is studying very actively by advanced country like United States. But differ from wireless communication in the air, underwater acoustic communication has some difficult problems, ISI(Inter Symbol Interference) due to multipath and limit of transmission bandwidth due to slow propagation of sound wave. In this paper, SC-FDE and OFDM transmission system for the cancellation of ISI in conjunction with underwater acoustic channel modeling are applied to the underwater simulation of communication. The performance of these methods in the simulation guide to possibility of adopting in underwater acoustic communication algorithm. For this purpose, we compare SER performance of SC-FDE with that of OFDM for modelled underwater channel. Underwater channel is generated by Bellhop model. Simulation results show above 5dB SNR gain at 10-3 SER. And it demonstrate SC-FDE is efficient method for underwater acoustic communication.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.2
• /
• pp.4-18
• /
• 2002

In this paper, we propose the new design method for the OFDM based modem that is considerd a standard of wireless communication in indoor environments. We designed a improved FFT/IFFT in order to satisfy a data rate $6{\sim}54$Mbps required homenetworking of high speed and a improved channel equalization circuit using pilot signals for modile environments. And we designed a carrier offset estimator that uses the $tan^{-1}$ circuit to organize a memory structure. All steps are verifed performance through a FPGA and are implemented ASIC to use a standard library cell.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.63-66
• /
• 2010

본 논문은 차세데 3D-TV 방송을 위해 수정된 ATSC (Modified Advanced Television Systems Committee) 시스템 [1]에서 파일럿 (Pilot)을 이용한 채널 추정 대신, PN 시퀀스 (Pseudo-Noise Sequence)를 이용한 채널 추정 방식의 문제점에 대하여 2가지 방법으로 연구하였다. PN 시퀀스를 이용하여 채널을 추정하는 TDS-OFDM (Time Domain Synchronous - Orthogonal Frequency Division Multiplexing)시스템은 QAM (Quadrature Amplitude Modulation) 변조 방식을 사용하기 때문에 수신측 PN 시퀀스의 위상 변화가 일어나지 않는다. 하지만 수정된 ATSC 시스템에서 사용하는 VSB (Vestigial Side Band)변조 방식에서 직교위상 (Quadrature) 채널을 통해 전송되는 값은 동위상 (In-Phase) 채널을 통해 전송되는 값의 단순한 힐버트 변환 (Hilbert Transform)에 의해 생성되어 불규칙한 위상 변화가 발생한다. 따라서 수정된 ATSC 시스템에서 채널 추정을 위해 PN 시퀀스를 사용하게 된다면 상관 (Correlation) 특성을 잃어버릴 것이며 올바른 채널 임펄스 응답 (Channel Impulse Response)을 얻을 수 없다.

• Journal of Communications and Networks
• /
• v.10 no.3
• /
• pp.258-267
• /
• 2008

In this paper, we examine what changes the next-generation wireless communication systems will experience in terms of the technologies, services, and networks and, based on that, we investigate how the inter-cell interference management should evolve in various aspects. We identify that the main driving forces of the future changes involve the data-centric services, new dynamic service scenarios, all-IP core access networks, new physical-layer technologies, and heavy upload traffic. We establish that in order to cope with the changes, the next-generation inter-cell interference management should evolve to 1) set the objective of providing a maximal data rate, 2) take the form of joint management of power allocation and user scheduling, 3) operate in a fully distributed manner, 4) handle the time-varying channel conditions in mobile environment, 5) deal with the changes in interference mechanism triggered by the new physical-layer technologies, and 6) increase the spectral efficiency while avoiding centralized coordination of resource allocation of the users in the uplink channel.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.655-665
• /
• 2012

Based on wideband precoding (WBP) in the multiple-input multiple-output orthogonal frequency division multiplexing system, an adaptive nonuniform codebook is presented in this paper. The relationship between the precoder distribution and spatial correlation is analyzed at first. A closed-form expression based on overlapped isosceles triangles is proposed as an approximation of the precoder distribution. Then, the adaptive codebook design is derived with the approximate distribution to minimize quantization errors. The capacity and bit error rate performance demonstrate that the adaptive codebook with WBP outperforms the conventional fixed uniform codebook.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.25-32
• /
• 2007

This paper proposes a distributed space-frequency block code (SFBC) for relay-assisted single carrier frequency-domain equalization (SC-FDE). The proposed technique achieves spatial diversity gain over fast fading channels without the complexity of multiple antennas. The mobile equipment of the proposed system has a very simple transmitter structure with constant amplitude transmit sequences, which is desirable especially for uplink communications. In order to obtain spatial diversity, the transmit sequence of relay is efficiently generated in the time domain, which is equivalent to the SFBC. Further, efficient implementation of relay and destination structures is also presented. Extensive simulation results show that the proposed system significantly outperforms the distributed space-time block code (D-STBC) SC-FDE over fast fading channels.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.205-213
• /
• 2011

The Long Term Evolution (LTE) system is designed to provide a high quality data service for fast moving mobile users. It is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the training samples which are systematically built within the transmitting data. Either a preamble or a lattice type is used for the distribution of training samples and the latter suits better for the multipath fading channel environment whose channel frequency response (CFR) fluctuates rapidly with time. In the lattice-type structure, the estimation of the CFR makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time-and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. All interpolation schemes should rely on the pilot estimates only, and thus, their performances are bounded by the quality of pilot estimates. However, the additive noise give rise to high fluctuation on the pilot estimates, especially in a communication environment with low signal-to-noise ratio. These high fluctuations could be monitored in the alternating high values of the first forward differences (FFD) between pilot estimates. In this paper, we analyzed statistically those FFD values and propose a postprocessing algorithm to suppress high fluctuations in the noisy pilot estimates. The proposed method is based on a localized adaptive moving-average filtering. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification. It is shown that the mean-squared error (MSE) between the actual CFR and pilot estimates could be reduced up to 68% from the noisy pilot estimates.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.229-235
• /
• 2019

The implementation of an in-band full-duplex wireless communication system is demonstrated in this study. In the analog/RF domain, the self-interference(SI) signal is reduced using a separate antenna for the transmitter and receiver paths, and most of the SI signal is canceled in the digital domain. A software defined radio(SDR) is used to implement the in-band full-duplex wireless communication system. The USRP X310 device uses transmitting and receiving antennas. By adjusting the gain of the transmitting and receiving ends of the SDR device, the magnitude of the SI signal entering the receiving antenna, and the size of the received signal from the outside, are both set to -64 dB. To verify the in-band full-duplex wireless communication performance, the source data is image and orthogonal frequency-division multiplexing is used for modulation. A WiFi standard frame with a carrier frequency of 2.67 GHz and bandwidth of 20 MHz is used. In the received signal, the SI signal is canceled by digital signal processing and the SI signal is attenuated by up to 34 dB. OFDM demodulation was impossible when the SI signal was not removed. However, the bit error rate is reduced to $2.63{\times}10^{-5}$ when the SI signal is attenuated by 34 dB, and no error is detected in the 100 Mbit data output as a result of passing through the Viterbi decoder.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.646-653
• /
• 2010

This paper provides a unified framework for the joint optimal subchannel and power allocation in multi-hop relay network, where each node in the network has multiple parallel subchannels such as in OFDM or MIMO system. When there are multiple parallel subchannels between nodes, the relay node decides how to match the subchannel at the first hop with the one at the second hop aside from determining the power allocation. Joint optimal design of subchannel matching and power allocation is, in general, known to be very difficult to solve due to the combinatorial nature involved in subchannel matching. Despite this difficulty, we use a simple rearrangement inequality and show that seemingly difficult problems can be efficiently solved. This includes several existing solution methods as special cases. We also provide various design examples to show the effectiveness of the proposed framework.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.105-111
• /
• 2011

In this paper, we propose a novel Alamouti space-time transmission scheme for orthogonal frequency division multiplexing (OFDM) based asynchronous cooperative communication systems with low relay complexity. The conventional scheme requires an additional operation likes time-reversal at the relay nodes besides the simple multiplications at the relay nodes, which result in increasing the complexity of relay nodes. Unlike the conventional scheme, exploiting the simple combination of the symbols at the source node and the simple multiplications at the relay nodes, the proposed scheme achieves the second order diversity gain by obtaining the Alamouti code structure at the destination node. Simulation results show that the proposed scheme achieves the second order diversity gain and has the same bit error rate performance as the conventional scheme.