• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.423-427
• /
• 2009

This study proposes the generation mechanism of various design matrix using generalized linear model for design of experiment. Design generation method of GLM analysis, factorial design(FD) with center points, ANOVA design with lack-of-fit test, and response surface design are introduced. In central composite(CC) design, orthogonal blocking and fractional factorial design(FFD) are presented. We compare the design of Box-Benhken(BB) and face-centred central compsite design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1967-1974
• /
• 2005

The butterfly valve has been used to control a flow effectively in the industrial because of its lightweight, simple structure and the rapidity of its manipulation. However, it is difficult to have the existing structural optimization using field analysis from CFD to structure analysis when the structure is influenced by fluid. This paper is evaluated the specificity to get the flow characteristic and stability of the butterfly valve using FEM and CFD. Also, it accomplished the shape optimization design using the orthogonal arrangement and characteristic function. Research result, a few experiments showed the optimal results of three dimensional structures to be multi-objective.

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.69-75
• /
• 2000

At the stage of initial design, prototypes are needed for engineering and aesthetic purposes. In order to get a fast and non-expensive prototype, designers prefer rapid prototyping(RP) to any other means. In driving a 3D CAD model into rapid prototyping, sectioning the model is essential and there are two negotiation-needed targets, enhancing accuracy while taking less build-time, which makes adaptive slicing taken into account. In spite of the advantages of adaptive slicing, it is not yet applied to real RP machines because of the limits of hardwares. In this thesis, a new slicing algorithm which (1)uses several values of thickness available in a RP machine. (2)determines total number of layers to make the prototype within the intended time and (3)arranges the layers using orthogonal arrays to minimize the volume error caused by the difference between a given CAD model and a fabricated model is presented. And the algorithm is expected to have possibility of assisting RP machines to take the advantages of adaptive slicing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.566-567
• /
• 2002

In this study, the measurement part in which the Fast Fourier Transform module and orthogonal filter are included is proposed. Protection relay should has a high precision and concurrently real-time response. Because FFT routine give micro-processor heavy burden and orthogonal filter reduces precision, both FFT module and orthogonal filter are designed to have different sampling frequency.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.117-123
• /
• 2006

Recently with the development of 3D modeling and digitizing tools, more and more models have been created, which leads to the necessity of the technique of 3D mode retrieval system. In this paper we investigate a new method for 3D model retrieval based on orthogonal projections. We assume that 3D models are composed of trigonal meshes. Algorithms process first by a normalization step in which the 3D models are transformed into the canonical coordinates. Then each model is orthogonally projected onto six surfaces of the projected cube which contains it. A following step is feature extraction of the projected images which is done by Moment Invariants and Polar Radius Fourier Transform. The feature vector of each 3D model is composed of the features extracted from projected images with different weights. Our System validates that this means can distinguish 3D models effectively. Experiments show that our method performs quit well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.295-297
• /
• 2007

We design a new rate-3/2 full-diversity orthogonal space-time block code (STBC) for QPSK and 2 transmit antennas (TX) and 4 transmit antennas (TX) by enlarging the signalling set from the set of quaternions used in the Alamouti[I] and extendedcode and using additional members of the set of orthogonal matrices or Quasi-orthogonal matrices and higher than rate-5/4. Selective power scaling of information symbols is used to guarantee full-diversity while maximizing the coding gain (CG) and minimizing the transmitted signal peak-to-minimum power ratio (PMPR). The optimum power scaling factor is derived analytically and shown to outpetform schemes based only on constellation rotation while still enjoying a low-complexity maximum likelihood (ML) decoding algorithm.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.222-231
• /
• 1996

Temperature distribution on the flank face in orthogonal turning with cutting tool of high speed steel is studied by using a finite element method and experiments. Experiments are carried out to verify the validity of the temperature measurement by using a thermoelectric couple junciton imbedded in a cutting tool of high speed steel. Good agreement is obtained between the analytical results and the experimental ones for the temperature distributions on flank face of cutting tool with igh speed steel. The analytical results show that the temperature on the top flank face of a tool is higher because of the difference of the friction velocity on each face of the tool.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.279-284
• /
• 2000

The object of this paper is to evaluate the chip breakability using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. L$\sub$9/(3$^4$) orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. The evaluation of chip breakability is used the chip breaking index(C$\sub$B/), non-dimensional parameter. And the analysis of variance (ANOYA)-test has been used to check the significance of cutting parameters. Using the result of ANOYA-test, the experimental equation of chip breakability, which consists of significant cutting parameters, has been developed. The coefficient of determination of this equation is 0.866.

• 응용통계연구
• /
• 제7권2호
• /
• pp.201-211
• /
• 1994

다구찌에 의해서 개발된 파라미터 설계법에서는 교호작용효과를 무시하고 직교배열을 이용하여 실험을 분석하는 것이 일반적인 방법으로 사용되고 있다. 본 논문에서는 직교배열과 거의 유사한 통계적 성질을 가지면서 최소의 실험횟수로 2인자 교호작용까지 분석할 수 있는 실험계획을 제시하고, 이러한 계획법에 의해 파라미터 설계법을 분석하고 유의적인 2인자 교호작용까지 검출하는 방법을 제시하였다.

• 방송공학회논문지
• /
• 제13권5호
• /
• pp.677-680
• /
• 2008

본 논문에서는 3차원 신호사상기를 이용하는 직교 주파수분할다중화가 제안된다. 여기서 신호사상기는 포앵카레 구면에 위치한 신호점들로 구성된다. 성상도 상의 신호점들이 균일하게 분포되고 동일한 평균전력을 가지도록 정규화된 경우 3차원 성상도의 신호점 간 최소 유클리드 거리는 2차원 신호성상도에 비하여 훨씬 커진다. 모의실험 결과, 제안된 3차원 직교 주파수분할다중화는 기존 시스템에 비하여 훨씬 향상된 심볼 오류성능을 가지는 것을 확인할 수 있다.