• The korean journal of orthodontics
• /
• v.42 no.6
• /
• pp.280-290
• /
• 2012

Objective: This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients. Methods: CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis. Results: Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 ($2.6^{\circ}$, $2.5^{\circ}$, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05). Conclusions: In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.297-306
• /
• 2011

Nonextraction camouflage treatment in mild Class III malocclusion is achieved by backward movement of the lower dentition and forward movement of the upper dentition. Many camouflage treatment modalities have been used for distal tipping and distal movement of mandibular posterior teeth. The amount of distal movement of mandibular dentition can be improved in cases of severe crowding, even without the patient's cooperation, by using miniscrews for anchorage. However, miniscrew insertion may be unsuccessful, and it may contact the adjacent root because of the distal movement of dentition. Distal tipping of mandibular dentition can be achieved using multiloop edgewise archwires and intermaxillary elastics. However, the complexity of this wire design causes discomfort to patients. Recently, a new treatment using improved superelastic NiTi wires (ISWs) and intermaxillary elastics has been introduced. ISWs can deliver orthodontic force more effectively, and their use with molar tip-back treatment has several advantages-this approach is effective, simple, and easy to use and reduces patient discomfort. The aim of this study was to report a case of camouflage treatment using ISW with tip-back and intermaxillary elastics for distal tipping of mandibular posterior dentition and to evaluate the effectiveness of this treatment in a clinical setting.

• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.399-410
• /
• 2011

Objective: The purpose of this study was to evaluate the difference in frictional resistance among metal, ceramic, self-ligation brackets and coated or non-coated Ni-Ti archwires at various bracket-archwire angulations during the sliding movement of an orthodontic archwire, using an orthodontic sliding simulation device. Methods: Four types of bracket (Micro-arch Perpect Clear2 Clippy-C and Damon3 and 5 types of orthodontic archwire (0.014", 0.016", and 0.016" ${\times}$ 0.022" inch coated Ni-Ti, and 0.016" and 0.016" ${\times}$ 0.022" inch Ni-Ti) were used. Further, the bracket- archwire angles were set at 4 different angulations: $0^{\circ}$, $3^{\circ}$, $6^{\circ}$, and $9^{\circ}$. Results: The frictions from all the experimental groups were found to be significantly increased in order of self-ligation brackets, Micro-arch and Perpect Clear2 ($p$ < 0.001). The presence of a coat had no effect on the friction of the same sized archwires at $0^{\circ}$ and $3^{\circ}$ bracket-archwire angles ($p$ < 0.001). Coated archwires had significantly higher frictions than the same sized non-coated archwires at $6^{\circ}$ and $9^{\circ}$ bracket-archwire angles ($p$ < 0.001). The frictions increased significantly as the bracket-archwire angles were increased ($p$ < 0.001). Conclusions: The use of self-ligation brackets will be beneficial in clinical situations where a low frictional force is required. Further, in cases where crowding is not severe, the use of coated archwires should not cause problems. However, more additional explanation is required considering the fact that the damage of coated archwire and exposure of the metal portion in case of binding and notching and the effects of saliva were not taken into account.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.21-44
• /
• 1989

Incipient changes of the periodontal tissue in the pressure zones of rat molar subjected to the experimental force were studied by the transmission electron microscope. Experimental animals were consisted in 3 control and 21 experimental rats, of which one maxillary first molar was moved buccally with a fixed appliance which were exerting the force of 15 gm. After experimental period of 1 hour, 3 hours, 6 hours, 24 hours, 2 days, 3 days and 7 days, the animal were sacrificed with cardiac perfusion of $2.5\%$ glutaraldehyde in the sodium cacodylate buffer and the experimental teeth with surrounding periodontal structures were processed for electron microscope. At the beginning of the tooth movement, periodontal ligaments of the pressure were compressed and collagenous fibers were arranged parallel to the root of the teeth and cell free zones in company with cell necrosis were followed. Cell free zones at the periodontal ligaments appeared in the 3 hour survival group, and getting severe with time lapse it became widespread in 2-3 day survival group and undermining bone resorption as a healing process was observed in 7 day survival group. Dilatation of mitochondria and swelling of the rER in the fibroblast and other connective tissue cells in the periodontal ligament were observed in the 3 hour survival group, which were characteristics of the incipient changes in the compressed periodontal ligament. Dilatation of nuclear membrane and pyknosis were followed by the destruction of the nucleus and cell membrane. There were no evidence in cell damage or necrosis of the alveolar bone adjacent to the hyalinized area of periodontal ligaments.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.77-96
• /
• 1991

Many studies has been conducted concerning prevention of unnecessary complications such as root resorption during orthodontic too th movement under various mechanical forces. Nowadays, the cause of the root resorption is not thought to be confined only to mechanical forces. But the factor that affects bone metabolism are thought to be major one of the predisposing factors. The light microscope and scanning electron microscope were used to the effects of 60 gm, and 100 gm of tipping force on root resorption of cats, which were treated with Etidronate disodium. The results were as follows: 1. In the 60gm control group, hyalinization on the compression site of periodontal ligament appeared after first week and second week. In the 60gm experimental group, it appeared after first week with low frequency. In the 100gm control group it appeared with high frequency by first and second week while in 100gm experimental group, it appeared with low frequency. 2 In the 100gm control group, resorption of the cementum and the alveolar bone rapidly increased after second week. In the 60gm experimental group, resorption or formation of alveolar bone and cementum didn't appear all through the experimental period. 3. In the 100gm control group, formation of cementum and alveolar bone appeared after first week while in the 100gm experimental group, formation of cementum and alveolar bone appeared after second week and fourth week respectively. In the 60gm control group, formation of the cementum didn't appear all through the experimental period. 4. In the control group, the root resolution of 100gm group was higher than that of 60gm group after second week, while in experimental group, root resorption didn't appear regardless of the forces.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.700-708
• /
• 2007

A midline deviation is divided into three types, such as a skeletal midline deviation, a dental midline deviation, and a combination. Among them, the midline deviation which appear in the early mixed dentition without any skeletal problem can be managed differently by the stage of dental development. The location of the permanent incisors can be improved without using artificial force in consideration of the condition of the space, the eruption timing or the eruption path of the adjacent permanent teeth in early mixed dentition, especially when the permanent incisors are erupting. Therefore, the space supervision technique, which can have the teeth align themselves utilizing physiologic events such as sequence or timing of the eruption of permanent teeth, can be an alternative to orthodontic movement. This case report describes midline deviation improvement by space supervision.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.1
• /
• pp.23-27
• /
• 2010

The purpose of this study was to evaluate the reliability of 6-axis model surgery simulator (6AMSS) for orthognathic surgery. A rectangular parallelepiped plastic block was assembled to model-mounting plate of 6AMSS. Left-right (X), anterior-posterior (Y), up-down (Z) translation and pitching (${\phi}X$), rolling (${\phi}Y$) and yawing (${\phi}Z$) rotation was planned and performed using 6AMSS. The actual translation and rotation were measured with dial gauge and precisional protractor, respectively. Comparison between the planned and actual movements of plastic block for each variable were made using paired t- test. Statistical analysis for X, Y, Z, ${\phi}X$, ${\phi}Y$ and ${\phi}Z$ movement have shown no significant differences between planned and actual movement (P > 0.05). This indicate that model surgery performed with the aid of the 6AMSS is accurate in 3D translation and rotation. The 6AMSS is practically useful for accurate fabrication of surgical splint for orthognathic surgery.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.290-300
• /
• 2016

Objective: This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods: Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results: An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions: The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.4-10
• /
• 2012

Purpose: The objective of this retrospective study was to assess the skeletal stability after orthognathic surgery for patients with cleft lip and palate. The soft tissue changes in relation to the skeletal movement were also evaluated. Methods: Thirty one patients with cleft received orthognathic surgery by one surgeon at the Craniofacial Center, Chang Gung Memorial Hospital, Taoyuan, Taiwan. Osseous and soft tissue landmarks were localized on lateral cephalograms taken at preoperative (T0), postoperative (T1), and after completion of orthodontic treatment (T2) stages. Surgical movement (T0.T1) and relapse (T1.T2) were measured and compared. Results: Mean anteroposterior horizontal advancement of maxilla at point A was 5.5 mm, and the mean horizontal relapse was 0.5 mm (9.1%). The degree of horizontal relapse was found to be correlated to the extent of maxillary advancement. Mean vertical lengthening of maxilla at point A was 3.2 mm, and the mean vertical relapse was 0.6 mm (18.8%). All cases had maxillary clockwise rotation with a mean of 4.4 degrees. The ratio for horizontal advancement of nasal tip/anterior nasal spine was 0.54/1, and the ratio of A' point/A point was 0.68/1 and 0.69/1 for the upper vermilion/upper incisor tip. Conclusion: Satisfactory skeletal stability with an acceptable relapse rate was obtained from this study. High soft tissue to skeletal tissue ratios were obtained. Two-jaw surgery, clockwise rotation, rigid fixation, and alar cinch suture appeared to be the contributing factors for favorable results.

• Journal of Korean Dental Science
• /
• v.5 no.1
• /
• pp.29-36
• /
• 2012

Purpose: To investigate the effects of anterior guidance (AG) change on the working (WCP) and non-working condylar paths (NWCP), and lower incisor path (LIP) using a splint with flat (FAG) or steep AG (SAG). Materials and Methods: The samples consisted of six young adult women (mean age=$23.5{\pm}3.3$ years). Inclusion criteria were skeletal Class I and normodivergent pattern, normal overbite/overjet, minimal slide from retruded cuspal position to intercuspal position, no temporomandibular disorder signs and symptoms, mutually protected occlusion, and minimal tooth wear. After the values of natural AG (NAG) were obtained as a reference for each patient, two types of splints ($15^{\circ}$ flatter and steeper than NAG) were made. After insertion of the splints with FAG or SAG, the WCP, NWCP, and LIP were recorded five times for each patient using an ultrasonic AQR (SAM, Munich, Germany) and statistical analysis was subsequently performed. Result: NAG exhibited postero-superior movement in the WCP and did not show a noticeable immediate side shift (ISS) or difference between the eccentric (EP) and returning paths (RP) in the NWCP. FAG was associated with an irregular and excessive WCP, an increase in ISS, and a difference between EP and RP in the NWCP. SAG showed minimal WCP movement and a decrease in the extent of difference between EP and RP in the NWCP. LIP showed significant differences in EP and in RP (P<0.001, all; FAG