• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.185-196
• /
• 2000

Patients who want to reduce their lip protrusion usually estimate the severity of the lip protrusion on the frontal aspect. Most orthodontists have a perplexed experience of a reduced thin line of vermilion border on the frontal aspect as incisors we retracted, even though the lip protrusion is thought to be reduced favorably on the sagittal aspect. Some patients also look older after orthodontic treatment because of severe lip thinning. This unaesthetic reduction of vermilion border urges us to study the vertical lip change during orthodontic procedure. The purpose of this study was to evaluate the vertical lip and perioral soft tissue changes in respect to incisor retraction in an effort to analyze which factors might be responsible for their vertical changes, using the multiple regression analysis. The results were as follows. 1. Upper and lower lip philtrum length(SnLs, LiB') were increased after retraction of anterior teeth, where as upper and lower vermilion height(LsSuls, StmiLi), and vermilion length(LsLi) were decreased. 2. Upper and lower lip length(SnStms, StmiB'), and soft tissue lower anterior facial height(SnMe') did not show any significant difference after treatment. 3. The increase of the upper lip philtrum length was mainly influenced by the extrusion of upper anterior teeth(${\Delta}U1V$), and the increase of the lower lip philtrum length was mainly influenced by the initial overjet before treatment. 4. The decrease of the upper and lower lip vermilion height was mainly influenced by the decrease of upper lip thickness.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.211-218
• /
• 2011

Purpose: Intentional replantation (IR) is a suitable treatment option when nonsurgical retreatment and periradicular surgery are unfeasible. For successful IR, fracture-free safe extraction is crucial step. Recently, a new extraction method of atraumatic safe extraction (ASE) for IR has been introduced. Patients and Methods: Ninety-six patients with the following conditions who underwent IR at the Department of Conservative Dentistry, Seoul National University Bundang Hospital, in 2010 were enrolled in this study: failed nonsurgical retreatment and periradicular surgery not recommended because of anatomical limitations or when rejected by the patient. Preoperative orthodontic extrusive force was applied for 2-3 weeks to increase mobility and periodontal ligament volume. A Physics Forceps was used for extraction and the success rate of ASE was assessed. Results: Ninety-six premolars and molars were treated by IR. The complete success rate (no crown and root fracture) was 93% (n = 89); the limited success rates because of partial root tip fracture and partial osteotomy were 2% (n = 2) and 5% (n = 5), respectively. The clinical and overall success rates of ASE were 95% and 100%, respectively; no failure was observed. Conclusions: ASE can be regarded as a reproducible, predictable method of extraction for IR.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.325-333
• /
• 2001

Optimal orthodontic treatment could be possible when a orthodontist can predict and control tooth movement by applying a planned force system to the dentition. The moment to force(M/F) ratio at the bracket, has been shown to be a primary determinate of the pattern of tooth movement. As various n/F ratios are applied to the bracket on the tooth crown, strain distribution in periodontium can be changed, and the center of rotation in tooth movement can be determined. It is, therefore, so important in clinicalorthodontics to know the strain distribution in a force system of a M/F ratio. The purpose of this study was to analyze the strain distribution in orthodontic force system by strain gauge attached to tooth root, and to evaluate the usage of the method. For this study, an experimental upper anterior arch model was constructed, where upper central incisors, on the root surface of which, 8 strain gauges were attached, were implanted In the photoelastic resin, as in the case of 4mm midline diastema. Three types of closing of upper midline diastema closure were compared : 1. with elastomeric chain(100g force) in no arch wire, 2. elastomeric chain in .016“ round steel wire, 3. elastomeric chain in .016”x.022“ rectangular steel wire. The results were as follows. 1. Strain distributions on labial, lingual, mesial and distal root surface of tooth were able to be evaluated with the strain gauge method, and the patterns of tooth rotation were understood by presuming the location of moment arm. 2. Extrusion and tipping movement of tooth was seen in closing in no arch wire, and intrusion and bodily movement was seen with steel arch wire inserted.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.260-269
• /
• 2019

The prolonged neglect of the posterior teeth missing area may cause mesial drift, extrusion, unexpected movement of the adjacent teeth and alveolar bone loss with occlusion collapse. Therefore it is recommended to treat that area by the prosthesis as soon as possible after tooth missing. However, if orthodontic treatment is applied to move the remained teeth, it can create improved biomechanical dentoalveolar environment. The use of the third molars in teeth missing area provides advantages as optimizing of prosthesis size. However, crown shape, location, soundness of the third molar and possible of eruption failure should be considered. In this case report, two patients closed a second teeth missing site and reduced the size of the first and second teeth missing area for an implant by protraction of impacted third molars. This case reports the considerations for closing or reducing the posterior teeth space with protracting the third molars by comparing two patients.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.395-400
• /
• 2002

This paper outlines the case of a 56 year-old man undertaking treatment by means of luxation and forced eruption of an ankylosed canine. At the time of diagnosis, the ankylosis of the tooth was not suspected, because there were not signs of intrusive luxation nor horizontal diaplacement. Only after the application of a vertical elastic force failed to erupt the maxillary left canine, was the ankylosis of that tooth suspected. At the time of reevaluation, the maxillary left canine hads no physiologic tooth mobility and emitted a sharp, ringing sound upon percussion. Hence, the maxillary left canine was considered ankylosed. The treatment course then changed to the extrusion of the canine through the surgical luxation of the tooth and the prompt application of vertical extrusive forces. The above outcome was successful for the patient not only in the orthodontic aspect, but also in terms of the periodontal considerations

• The korean journal of orthodontics
• /
• v.46 no.4
• /
• pp.212-219
• /
• 2016

Objective: The purpose of this study was to evaluate treatment effects after distalization of the mandibular dentition using ramal plates through lateral cephalograms. Methods: Pre- and post-treatment lateral cephalograms and dental casts of 22 adult patients (11 males and 11 females; mean age, $23.9{\pm}5.52years$) who received ramal plates for mandibular molar distalization were analyzed. The treatment effects and amount of distalization of the mandibular molars were calculated and tested for statistical significance. The significance level was set at p < 0.001. Results: The mandibular first molar distalization at the crown and root were 2.10 mm (p < 0.001) and 0.81 mm (p = 0.011), respectively. In the evaluation of skeletal variables, there was a significant increase in the Wits appraisal (p < 0.001). In the evaluation of the soft tissue, there was no significant effect on upper lip position, but the lower lips showed a significant retraction of 2.2 mm (p < 0.001). Conclusions: The mandibular molars showed a significant amount of distalization accompanied by limited extrusion and mesiobuccal rotation of the crowns. A ramal plate may be a viable device for mandibular total arch distalization in Class III patients who are reluctant to undergo orthognathic surgery.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.224-235
• /
• 2018

Objective: The purpose of this study was to compare the skeletal, dental, and soft-tissue treatment effects of nonextraction therapy using the modified C-palatal plate (MCPP) to those of premolar extraction (PE) treatment in adult patients with Class II malocclusion. Methods: Pretreatment and posttreatment lateral cephalographs of 40 adult patients with Class II malocclusion were retrospectively analyzed. The MCPP group comprised 20 patients treated with total arch distalization of the maxillary arch while the PE group comprised 20 patients treated with four PE. Fifty-eight linear and angular measurements were analyzed to assess the changes before and after treatment. Descriptive statistics, paired t-test, and multivariate analysis of variance were performed to evaluate the treatment effects within and between the two groups. Results: The MCPP group presented 3.4 mm of retraction, 1.0 mm of extrusion, and $7.3^{\circ}$ lingual inclination of the maxillary central incisor. In comparison, the PE group displayed greater amount of maxillary central incisor retraction and retroclination, mandibular incisor retraction, and upper lip retraction (5.3 mm, $14.8^{\circ}$, 5.1 mm, and 2.0 mm, respectively; p < 0.001 for all). In addition, the MCPP group showed 4.0 mm of distalization and 1.3 mm of intrusion with $2.9^{\circ}$ distal tipping of the maxillary first molars. Conclusions: These findings suggest the MCPP is an effective distalization appliance in the maxillary arch. The amount of incisor retraction, however, was significantly higher in the PE group. Therefore, four PE may be recommended when greater improvement of incisor position and soft-tissue profile is required.

• The korean journal of orthodontics
• /
• v.46 no.6
• /
• pp.379-385
• /
• 2016

Objective: Forced eruption has been proposed for the reconstruction of deficient bone and soft tissue. The aim of this study was to examine the changes in the alveolar ridge width and the vertical levels of the interproximal bone and papilla following forced eruption. Methods: Patients whose hopeless maxillary anterior teeth were expected to undergo severe bone resorption and soft tissue recession upon extraction were recruited. In addition, patients whose maxillary anterior teeth required forced eruption for restoration due to tooth fracture or dental caries were included. Before and after forced eruption, the interproximal bone height was measured by radiographic analysis, and changes in the alveolar ridge width and the interproximal papilla height were measured with an acrylic stent. Results: This prospective study demonstrated that the levels of the interproximal alveolar bone and papilla were significantly increased by 1.36 mm and 1.09 mm, respectively, in the vertical direction. However, the alveolar ridge width was significantly reduced by an average of 0.67 mm in the buccolingual direction. The changes in the level of the interproximal alveolar bone and papilla were positively correlated. Conclusions: Although the levels of the interproximal bone and papilla were significantly increased, the alveolar ridge width was significantly decreased following forced eruption. There was a modest positive and significant correlation between the changes in the height of the interproximal alveolar bone and the papilla. Based on our findings, modification of vertical forced eruption should be considered when augmentation of the alveolar ridge width is required.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.376-381
• /
• 2008

In mixed dentition there exists many empty spaces in the arch due to eruption of permanent teeth and exfoliation of primary teeth. The empty spaces makes it difficult to apply fixed orthodontic appliances. Horseshoe Appliance can be used effectively at this stage, holding the whole dentition in one piece. It covers every surface of erupted teeth and prevents extrusion and rotation of single tooth. By using intermaxillary elastic force, remodeling of the alveolar bone is opposite in each arch. In patients who were treated with horseshoe appliance, forward growth of maxilla, labioversion of maxillary incisors and linguoversion of mandibular incisors were obtained. Minimum downward and clockwise rotation of mandible was shown, so increasing anterior facial height was minimized.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.25-34
• /
• 1997

This study was made with lateral cephalometric radiography of 28 skeletal class III malocclusion patients that were performed to setback surgery of mandible. The 28 patients were selected by four standards as follows. 1) Set-back amount of mandible is below 10 mm 2) No extrusion and intrusion of posterior tooth or alteration of interincisial angle at period of postoperative orthodontic treatment. 3) Change of mesial segment location of mandible on lateral cephalometrics 4) No genioplasty And 28 patients were divided to three group(1,2,3 group) by degree of preoperative occlusal plane angle to Burstone's horizontal plane. The preoperative occlusal plane angle, which of 1 group was smaller than $7^{\circ}$ and 2 group was between $7^{\circ}$ to $15^{\circ}$ and 3 group was larger than $15^{\circ}$. The results were as follows : 1. As the preoperative occlusal plane angle was larger, the degree of mandibular prognathism was not severe. 2. On comparsion of preoperative and immediate postoperative cephalometric analysis, specific relationship of occlusal plane angle and set-back amount of mandible was not present. 3. As the preoperative occlusal plane angle was smaller, the alteration of postoperative occlusal plane angle was increased tendency. As the preoperative occlusal plane angle was larger, the alteration of postoperative occlusal plane angle was decreased tendency. 4. The relapsed degree of B point distance to Vertical plane was not relationship to the degree of preoperative occlusal plane angle.