• Journal of the Korean Society of Costume
• /
• v.57 no.7
• /
• pp.108-121
• /
• 2007

The purpose of this study was to seek the means of enlarging the application of Saek-dong to fashion products by surveying and analysing the recognition and image of Saek-dong in college students. As a research procedure, the bibliographical survey on the meaning and history of Saek-dong was preceded in this study, and the students were examined on the recognition and image of Saek-dong through the questionnaires. The female students were more acquiesced with the Saek-dong and Saek-dong clothing than the male students. And the students thought that the Saek-dong was our original and traditional clothing because it was worn by our ancestors from the earliest years. The word Saek-dong reminded them of red, yellow, blue, green, white and red-brown colors in order of appearance. The most familiar color-arrange to them was red+yellow+dark-brown+green+blue, and the blue, purple, green, red, white color was thought as manly Saek-dong colors and the yellow, red, dark-brown, pink, white was regarded as feminine Saek-dong colors. Saek-dong was primarily associated with the image of Saek-dong clothing and most of the students expressed their feeling about the Saek-dong as 'cute.' Most of the students responded that the practical Hanbok was best illustrated as the most applied clothing of Saek-dong and that the attempt to apply the color and pattern of Saek-dong to other modern artistic products was likely to damage the worth of traditional Saek-dong. When it comes to the matter of applying the design of Saek-dong to the fashion products, male students thought that it could be best applied to the shirts, while female students thought that the design of Saek-dong could best be applied to the personal ornaments.

• Geomechanics and Engineering
• /
• v.20 no.3
• /
• pp.207-220
• /
• 2020

Clay soils have a big potential to become contaminated with the oil derivatives because they cover a vast area of the earth. The oil derivatives diffusion in the soil lead to soil contamination and changes the physical and mechanical properties of the soil specially clay soils. Soil stabilization by using new material is very important for geotechnical engineers in order to improve the engineering properties of the soil. The main subjects of this research are a- to investigate the effect of the cement and epoxy resin mixtures on the stabilization and on the mechanical parameters as well as the microstructural properties of clay soils contaminated with gasoline and kerosene, b- study on the phenomenon of clay concrete development. Practical engineering indexes such as Unconfined Compressive Strength (UCS), elastic modulus, toughness, elastic and plastic strains are all obtained during the course of experiments and are used to determine the optimum amount of additives (cement and epoxy resin) to reach a practical stabilization method. Microstructural tests were also conducted on the specimens to study the changes in the nature and texture of the soil. Results obtained indicated that by adding epoxy resin to the contaminated soil specimens, the strength and deformational properties are increased from 100 to 1500 times as that of original soils. Further, the UCS of some stabilized specimens reached 40 MPa which exceeded the strength of normal concrete. It is interesting to note that, in contrast to the normal concrete, the strength and deformational properties of such stabilized specimens (including UCS, toughness and strain at failure) are simultaneously increased which further indicate on suitability and applicability of the current stabilization method. It was also observed that increasing cement additive to the soil has negligible effect on the contaminated soils stabilized by epoxy resin. In addition, the epoxy resin showed a very good and satisfactory workability for the weakest and the most sensitive soils contaminated with oil derivatives.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.146-152
• /
• 2007

An active micro-mixer, which was composed of an oscillating micro-stirrer in the microchannel to provide rapid, effective mixing at high flow, rates was analyzed. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight microchannel and microchannel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced and stabilized. Therefore, an optimum design for a dynamic micro-mixer with an oscillating stirrer was performed using Taguchi method in order to obtain a robust solution. The design parameters were established as the frequency, the length and the angle of the stirrer and the optimal values were determined to be 2, 0.8D and ${\pm}75^{\circ}$, respectively. It was found that the mixing index of the optimal design increased 80.72% compared with that of the original design.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.5
• /
• pp.95-100
• /
• 2008

An active micro-mixer, which is composed of an oscillating micro-stirrer in the micro-channel to provide effective mixing was optimized. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight micro-channel and micro-channel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models were compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced and stabilized. Therefore, an approximate optimization of an active micro-mixer with an oscillating stirrer was performed using Kriging method with OLHD(Optimal Latin Hypercube Design) in order to determine the optimal design variables. The design parameters were established as the frequency, the length and the angle of the stirrer. The optimal values were obtained as 1.0346, 0.66D and $\pm45^{\circ}$, respectively. It was found that the mixing index of the optimal design increased by 88.72% compared with that of the original design.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.146-158
• /
• 1991

The flow around a two-dimensional foil section Is measured by a LDV(Laser Doppler Velocimetry) system which is capable of measuring the datailed flow field without interfering the original flow field. A 2-color 3-beam LDV system, which is capable of mea,;tiring 2 velocity components simultaneously and uses 2W Ar-Ion laser source, is used to measure the flow field around an NACA0012 foil section. The measured flow velocities are analysed iii order to study the boundary layer characteristics, flow separation and the detail structure of the flow near the trailing edge of the foil. The boundary layer characteristics are compared with the results by the head's momentum integral method. For the case of small angle of attack at relatively higher Reynolds number, both results show good agreements. The measured data of the velocity field around an NACA0012 foil section would be valuable data to validate the CFD(Computational Fluid Dynamic) calculation results. The developed experimental technique to evaluate the characteristics of two-dimensional foil sections is essential tool to develope new blade sections which have good lift characteristics and better cavitation performances.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.67-72
• /
• 2014

In this paper, we proposed A Study on Construction of Infrastructure for Handicapped Parking Areas Using RFID. This paper is Construction of the Handicapped Parking Areas infrastructure Using RFID with 900MHz band, and researched the optimal position of the tag attached on the vehicle and the location of RFID reader in order to raise the efficiency of RFID reader and the recognition rate by the handicapped vehicle. The result of research is shown the optimal position of RFID reader establishment when the height of RFID reader is 170cm in height and the angle of $80^{\circ}$ with the ground when the vehicle traveling direction of the antenna and the RFID reader when the surface and the angle of $90^{\circ}$ showed the best position RFID readers installed. Parking spaces for the disabled in accordance with these results the RFID readers installed and it works in conjunction with enforcement camera car tagged crackdown on vehicles and other general management, the system is built to allow handicapped parking spaces that meet the intent of the original purpose being used as expected to contribute significantly.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.3 s.303
• /
• pp.73-82
• /
• 2005

Recently, The wide range of the Internet applications and the related technology developments enabled the ease use of the digital multimedia contents (fixed images, movies, digital audios). However, due to the replay ability which the contents may be easily duplicated and not only the duplicates are capable of providing the same original quality. There are mainly the encipher techniques and the watermarking techniques which are studied and used as solutions for the above problem in order to protect the license holders' rights. To the protection of the IP(Intellectual Property) rights of the owner, digital watermarking is the technique that authenticates the legal copyrighter. This paper proposed the watermarking algorithms to watermark the 256 gray logo image and the color image by applying the wavelet transformation to the color stand-still images. The proposed algorithms conducted the watermark insertion at the LH frequency region among the wavelet transformation regions (LL, LH, HL, HH). The interleaving algorithms which applied in data communication was applied to the watermark. the amount of watermark increased which consequently caused the PSNR to decrease but this might provide the perseverance against the external attacks such as extraction, filtering, and crop.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.319-325
• /
• 2017

The scenography in terms of directorial viewpoints could suggest the overall vision of scripts rather than providing stage design only. I chose Antonio Buero Vallejo' because he presented the spatial characteristics and images clearly and believe that it could be an exciting challenge to change its original scenography that the playwright suggested. The concept of failed social success and enclosed repeated destiny spaces gave shape to my scenography of stairs. I chose every character in this play had to climb a flight of stairs in order to go outside because a main and sole entrance was located on the top floor. Characters' visual movement which went up in the morning for their dreams, but came down disappointedly due to failure day by day. This concept of scenography became the characters' given circumstances and intended to always affect the characters' acting during the show. Finally, I verified a new scenographic possibility beyond theoretical examination because I applied it to practical production.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.39-45
• /
• 2017

Image compression is now essential for applications such as transmission and storage in data bases. For video and digital image applications the use of long tap filters, while not providing any significant coding gain, may increase the hardware complexity. We use a wavelet transform in order to obtain a set of bi-orthogonal sub-classes of images; First, the design of short kernel symmetric analysis is presented in 1-dimensional case. Second, the original image is decomposed at different scales using a subband filter banks. Third, this paper is presented a technique for obtaining 2-dimensional bi-orthogonal filters using McClellan transform. It is shown that suggested wavelet bases is well used on wavelet transform for image compression. From performance comparison of bi-orthogonal filter, we actually use filters close to ortho-normal filters on application of wavelet bases to image analysis.

• Korean Journal of Childcare and Education
• /
• v.7 no.2
• /
• pp.115-135
• /
• 2011

The purpose of this study was to developing a cooperative learning model utilize storytelling technique to the Preliminary childhood teachers whose learning was in order to improve ability and collaboration of making relationships a teams members by the cooperative learning which was performed on the basis of the confidence after understanding themselves and others. To achieve the purpose, the study was performed by dividing into two stages. First, the draft of storytelling based cooperative learning model was proposed by performing a literature survey and a case study. Second, the draft model was applied to the actual work. And the draft was modified and developed to the final model on the basis of the draft model's strenth and implemented to 39 students who were the sophomore of child care education department and enrolled the profession class of at B college P city for 8 weeks. From the implementation result of the model, it was obtained that there was the positive reaction on applying storytelling technique to the beginning stage of cooperative learning. And adding of 'Re-constitution role sharing team' step in the original steps was suggested. In the end, this model was modified and issued based on the research result. The researchers proposed a cooperative learning model storytelling based for Preliminary childhood teachers which consists 6 phases : (1) understanding cooperative learning (2) Building the team and role sharing team (3) theme setting and theme structuralization (4) Re-constitution role sharing team (5) announcement of the results and evaluating (6) reflection of general.