• 인지과학
• /
• 제14권3호
• /
• pp.1-11
• /
• 2003

정지/운동하는 배경자극들 속에서 정지/운동하는 표적을 탐지하는 데 있어서 표적 유형과 망막 이심율의 효과를 알아보기 위해서 두 가지 실험을 수행하였다. 두 실험 모두 시각탐색과제를 사용하였다. 망막 이심율은 1.6$^{\circ}$ 단위로 커지는 5개의 동심원으로 구분하였으며, 표적은 배경자극과 방위차원에서 차이나는 방위 표적과 세부특정에서 차이나는 세부특정 표적이었다. 실험 l에서는 표적과 배경자극이 모두 정지되어있는 상황에서의 탐색을 다루었다. 그 결과 표적 유형과 망막 이심율 사이에 상호작용이 있었다. 정지상황에서 방위 표적은 망막 이심율의 영향을 별로 받지 않는 반면에, 세부특정 표적은 망막 이율이 증가함에 따라서 탐지시간이 일관성 있게 증가하였다. 표적과 배경자극이 모두 운동하는 상황인 실험 2 에서도 둘 사이의 상호작용이 나타냈으나, 그 이유는 실험 1과 극적인 대조를 이루었다. 즉, 운 동 상황에서 방위 표적은 망막 이심율이 증가함에 따라서 탐지시간이 일관성 있게 감소하는 반면, 세부 특징 표적은 망막 이심율의 영향을 거의 받지 않았다. 두 실험의 결과를 항공기나 자동차의 운동과 같은 현실상황과 관련된 합의와 문제점 그리고 향후 연구방향을 논의하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1049-1052
• /
• 2003

This study shows the change of the structural characteristic of AIN thin film deposition with the change of the deposition conditions such as Ar/$N_2$ gas ratio, operating pressure in chamber, and the distance between substrate and target in RF Magnetron Sputtering. The orientation and surface roughness of AIN thin film are studied by using XRD and AFM and the thickness is measured by using STYLUS PROFILER. While we can not identify the orientation of the thin film deposited in Ar only, we can obtain the (100) orientation of the thin film with the addition of $N_2$ to Ar. Especially the thin film deposited at 10% of Ar/$N_2$ gas ratio appears to be the most (100) oriented. The (100) orientation of thin film becomes weaker as the operating pressure becomes higher. The further distance between substrate and target is stronger the (100) orientation of the thin film is. The (100) orientation becomes weaker and (002) orientation starts to appear as the distance is shorter.

• Design & Manufacturing
• /
• 제16권4호
• /
• pp.24-33
• /
• 2022

Fiber-reinforced plastics(FRPs) have excellent specific stiffness and strength, so they are usually used as automotive parts that require high rigidity and lightweight instead of metal. However, it is difficult to predict the mechanical properties of injection molded parts due to the fiber orientation and breakage of FRPs. In this paper, the fiber orientation characteristics and mechanical properties of injection molded specimens were evaluated in order to fabricate automotive transmission side covers with FRPs and design a rib structure for improvement of their rigidity. The test molds were designed and manufactured to confirm the fiber orientation characteristics of each position of the injection molded standard plate-shaped specimens, and the tensile properties of the specimens were evaluated according to the injection molding conditions and directions of specimens. A gusset-rib structure was designed to improve the additional structural rigidity of the target products, and a proper rib structure was selected through the flexural tests of the rib-structured specimens. Based on the evaluation of fiber orientation and mechanical characteristics, the optimization analyses of gate location were performed to minimize the warpage of target products. Also, the deformation analyses against the internal pressure of target product were performed to confirm the rigidity improvement by gusset-rib structure. As a result, it could be confirmed that the deformation was reduced by 27~37% compared to the previous model, when the gusset-rib structure was applied to the joining part of the target products.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1042-1046
• /
• 1993

This paper describes a control scheme for a robot manipulator system which uses visual information to position and orientate the end-effector. In this scheme, the position and orientation of the target workpiece with respect to the base frame of the robot are assumed to be unknown, but the desired relative position and orientation of the end-effector to the target workpiece are given in advance. The control scheme directly integrates visual data into the servoing process without subdividing the process into determination of the position and orientation of the workpiece and inverse kinematics calculation. A neural network system is used for determining the change in joint angles required in order to achieve the desired position and orientation. The proposed system can be control the robot so that it approach the desired position and orientation from arbitrary initial ones. Simulation for the robot manipulator with six degrees of freedom will be done. The validity and the effectiveness of the proposed control scheme will be verified by computer simulations.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.116-119
• /
• 2000

The a-axis and c-axis prefer oriented SBT thin films could be deposited on Pt(111)/Ti/$SiO_2$$650^{\circ}C$). The c-axis preferred orientation of SBT film can be obtained by Sr deficiency and high compressive stress. However, the a-axis-oriented grains can be formed under stoichiometric Sr content and nearly stress-free state.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.106-110
• /
• 2004

NiO 산화물 타겟을 이용한 RF 마그네트론 스퍼터로 상온에서 Si(100) 기판 위에 NiO 박막을 증착시켜, 스퍼터 가스의 산소 유량비가 NiO 박막의 결정 배향성과 표면 형상에 미치는 영향을 조사하였다. Ar 가스에서 증착된 NiO 박막은 높은결정화도와 (100)면의 우선 배향성을 나타내었으나, $O_2$ 가스에서 증착된 경우에는 (111)면의 우선 배향성을 보였으며 그 증착속도도 감소하였다. 스퍼터 가스의 $O_2$ 함량에 따른 NiO 박막의 결정성과 우선배향성 변화에 대한 요인을 고찰하였으며, 박막의 표면 형상과 거칠기의 변화를 조사하였다.

• Journal of electromagnetic engineering and science
• /
• 제14권2호
• /
• pp.79-81
• /
• 2014

In B-scan data measured by a pulse-type monostatic borehole radar, target signatures are seriously obscured by two clutters that differ in orientation and intensity. The primary clutter appears as a nearly constant time delay, which is caused by internal ringing between antenna and transceiver in the radar system. The secondary clutter occurs as an oblique time delay due to the guided borehole wave along the logging cable of the radar antenna. This issue led us to perform adaptive filtering processing for orientation-based clutter removal. This letter describes adaptive filtering processing consisting of a combination of edge detection, data rotation, and eigenimage filtering. We show that the hyperbolic signatures of a dormant air-filled tunnel target can be more distinctly enhanced by applying the proposed approach to the B-scan data, which are measured in a well-suited test site for underground tunnel detection.

• 대한인간공학회지
• /
• 제9권1호
• /
• pp.35-42
• /
• 1990

This study is concerned with the accuracy, of error with which subjects can interpolate the location of a target between two graduation markers with 4 orientations and 6 sizes CRT display. Stimuli were graphic images on CRT with a linear, end-markec, ungraduated scales having a target. The location of a target is estimated in units over te range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less than 2 units, modal error was 1, and the most error (; 99.7%) was within 10. A proper size to make an minimum error in interpolation exists such that size 400 pixels. Interpolation estimation is shown to be affected by the size, location and interaction (orientation x location, size x location). The accuracy, interpolation performance are discussed in relation to absolute error associated with visual performance.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1023-1028
• /
• 2004

We fabricated AIN thin film by using RF magnetron sputtering and studied the structural characteristic of AIN thin film with the change of the deposition conditions such as Ar/$N_2$ flow ratio, working pressure, and the distance between substrate and target. The orientation and surface roughness of AIN thin film were studied by using XRD and AFM. We can not identify the orientation of the thin film deposited in Ar, while we obtained the (l00) orientation of the thin film with the addition of $N_2$. Especially, the thin film deposited at 18/2 (seem) of Ar/$N_2$ flow ratio exhibited to be the most (100) oriented. The (100) orientation of thin film becomes weaker as the working pressure becomes higher. The further distance between substrate and target is stronger the (100) orientation of the thin film, but the (100) orientation becomes weaker and (002) orientation started to appear as the distance is shorter. The surface roughness of the thin film deposited at 50$0^{\circ}C$ in Ar only is 1.1 nm, while very smooth thin film of 0.4～0.6 nm is obtained with the addition of $N_2$.

• 한국수산과학회지
• /
• 제48권2호
• /
• pp.233-243
• /
• 2015

Controlled broadband acoustic scattering laboratory experiments were conducted using a linear chirp signal (95-220 kHz), and x-ray images of live and model fish with an artificial swim bladder were analyzed to investigate the changes in orientation and frequency dependence of target strength (TS) due to morphological differences in fish swim bladders. The broadband echoes from live and model fish were measured over an orientation angle range of ${\pm}45^{\circ}$ in the dorsal plane and in approximately $1^{\circ}$ increments. The location of nulls in the simulated echo response of the SINC [sinc function] model was overlaid on the TS map, showing the orientation and frequency dependence of fish TS, and they matched very well. It was possible to infer the equivalent fish scattering size (or swim bladder) using the null spacing in the experimentally obtained broadband TS map. Good agreement was observed for inferring the equivalent scattering size between the SINC model and the broadband echoes measured for the three fish species (black scraper Thamnaconus modestus; goldeye rockfish Sebastes thompsoni; and whitesaddled reef fish Chromis notatus). Some results of this inference are discussed.