• 한국세라믹학회지
• /
• 제27권2호
• /
• pp.249-255
• /
• 1990

High Tc Supperconducting thin films were fabricated by rf magnetron sputtering method. We have successfully controlled the compositions of films by adding sintered CuO pellets on YBa2Cu3O7-x single target. High Tc thin films with large grian size and good crystal habit were obtained by rapid thermal annealing process. The films deposited on SrTiO3(100) single crystal substrate indicated the existence of c-axis prefered orientation confirmed by XRD and SEM analysis. The Tc, zero's of sharp resistive transition for rapid annealed films deposited on polycrystalline YSZ substrate and on SrTiO3(100) single crystal substrate were 79K and 88K, respectively.

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.786-794
• /
• 1998

This paper proposes an automatic microshaping technology using laser and applies it to implementation of semicutting control system of the panel inside which a car air bag is equipped. Since it is impossible to project laser directly onto the desired working point of a target panel due to fixedness of laser generator, we reflect the generated laser, using reflection mirrors and focusing lenses, to project onto the desired working point. Also, in order to conduct an uniform semicutting control with constant width and depth, we control the end-effector of manipulator, which grasp the laser reflection mirror, to track working path with constant speed and orientation. The validity and effectiveness of the proposed methods are checked through experiments tracking a path formatted with straight lines and arcs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.688-691
• /
• 1997

Good quality superconducting $YBa_2Cu_30_{7-{\delta}}$(YBCO) thin films were grown on Hastelloy (Ni-Cr-Mo alloys) with yttria-stabilized zirconia(YSZ) buffer layers by in situ pulsed laser deposition in a multi-target processing chamber. Generally, Hastelloy exhibits excellent resistance to corrosion, fatigue, thermal shock, impact, and erosion. However, it is difficult to make films on flexible metallic substrates due to interdiffusion problems between metallic substrates and superconducting overlayers. To overcome this difficulty, it is necessary to use YSZ buffer layer since it will not only limit the interdiffusion process but also minimize the surface microcrack formation due to smaller mismatch between the film and the substrate. In order to enhance the crystallinity of YBCO films on metallic substrates, YSZ buffer layers were grown at various temperatures different from the deposition temperature of YBCO films. On YSZ buffer layer grown at higher temperature than that for depositing YBCO film, the YBCO thin film was found to be textured with c-axis orientation by x-ray diffraction and had a zero-resistance critical temperature of about 85K.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.539-539
• /
• 2000

This paper shows how to implement force reflection for a needle insertion problem. The target is a needle spine biopsy simulator for tumor inspection by needle insertion. Simulated force is calculated from the relationship of volume graphic data and the orientation and Position of the needle, and it is generated using PHANTOM$^{TM}$. To generate realistic force reflection, the directional force of the needle has been generated by tissue model. The other rotational force is generated using a pivot to keep the needle in the initial inserted direction after puncturing the skin. Since the used haptic device has limitation for generating high stiffness and large damping, scale downed model and digital filter are used to stabilize the system.m.

• 대한의용생체공학회:의공학회지
• /
• 제26권3호
• /
• pp.133-138
• /
• 2005

This paper presents a new method for measuring ocular torsion using the optical flow. Images of the iris were cropped and transformed into rectangular images that were orientation invariant. Feature points of the iris region were selected from a reference and a target image, and the shift of each feature was calculated using the iterative Lucas-Kanade method. The feature points were selected according to the strength of the corners on the iris image. The accuracy of the algorithm was tested using printed eye images. In these images, torsion was measured with $0.15^{\circ}$ precision. The proposed method shows robustness even with the gaze directional changes and pupillary reflex environment of real-time processing.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2805-2816
• /
• 1994

This paper describes dynamic finite element analyses performed to study the dynamic behaviors of a shipping container under the impact onto rigid target due to the accidental fall from the hight of 9 m. Using two and three dimensional techniques, the shipping container which gave the maximum damage, ten different drop orientations are considered ; at intervals of $5^{\circ}$ from $45^{\circ}$ to $90^{\circ}$ According to the present results, the orientation of the shipping container which gave the maximum damage is $85^{\circ}$ from horizontal for oblique drop in the primary impact. In the optimal design of the shipping container, the impact limiter material must be considered importantly because it's proper selection affects the weight and the manufacturing cost of the shipping container. The analysis of the shipping container in this paper demonstrated that the shipping container is structurally sound relative to the regulatory drop test requirements.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.125-132
• /
• 2007

Inherent dynamic interaction between flexible disk and workpiece creates partially non-flat surface profile. A flat zone was defined using minimum depth of engagement. Several key parameters were defined to explain the characteristics of the zone. Process conditions including disk rotation speed, initial depth of cut and feed speed were varied to produce product profile database. Correlation between key factors was examined to find the characteristic dependencies. Trends of key parameters were displayed and explained. Higher flat zone ratio was observed for lower depth of cut and higher disk rotation speed. Ratio of minimum depth of cut against target depth of cut increased for higher feed speed and disk rotation speed but was insensitive to the depth of cut variation. The process transition was visualized by continuously displaying instantaneous orientation of the deflected disk and the location of key parameters were clearly marked for comparison.

• 웰빙융합연구
• /
• 제2권1호
• /
• pp.35-39
• /
• 2019

This paper presents two social and academic studies on the boundary between cultural production and consumption. The first line of the study on cultural omnivore analyzes the choice of heterogeneous audiences in the face of various cultural offerings. The second line is a study of market categories, which analyzes the responses of peer audiences to objects with different levels of category code compliance. As such, this paper developed a heterogeneous audience model to evaluate objects of different types. This allows us to consider two dimensions of cultural preference: diversity and orientation of selection. To this end, this paper proposes a new analytical frame work to map consumption behavior on these two dimensions. The results suggest that one type of target that values diversity and transformation is particularly resistant to those that span boundaries. We test this argument in the analysis of two large data sets on film and restaurant reviews. Overall, our findings can extend beyond cultural consumption. Outline variability of contextual individuals or individuals in the same situation can cross cultural boundaries even if they are not intentionally pursuing such hybridism.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.446-459
• /
• 2016

In this paper, we propose virtual direction multicast (VDM) for video multicast applications on peer-to-peer overlay networks. It locates the end hosts relative to each other based on a virtualized orientation scheme using real-time measurements. It builds multicast tree by connecting the nodes, which are estimated to be in the same virtual direction. By using the concept of directionality, we target to use minimal resources in the underlying network while satisfying users' quality expectations. We compare VDM against host multicast tree protocol.We simulated the protocol in a network simulator and implemented in PlanetLab. Results both from simulation and PlanetLab implementation show that our proposed technique exhibits good performance in terms of defined metrics.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.1-8
• /
• 2003

In general, the microstructure in thin films was known to evolve in similar manner according to the energy striking the condensing film at similar homologous temperature, Th for the materials of the same crystal structure. The fundamental factors affecting particle energy are a function of processing parameters such as working pressure, bias voltage, target/sputtering gas mass ratio, cathode shape, and substrate orientation. In this study, Al, Cu, Pt films of the same crystal structure of face centered cubic (FCC) have been prepared under various processing parameters. The influence of processing variables on the microstructures and residual stress states in the films has been studied.