• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1348-1354
• /
• 2008

Two inorganic (zinc sulfate and zinc oxide) and three organic (zinc acetate, zinc-methionine, and zinc-lysine) zinc sources were evaluated for their effects on the performance and carcass characteristics of broiler chicks. The birds were randomly assigned to one control (non-supplemented) and 15 treatment (supplemented) groups consisting of four replicates of 10 chicks each in a $5{\times}3$ factorial arrangement of treatments (five zinc sources and three supplemental zinc levels). Birds were kept in floor pens in a temperature-controlled room from 1 to 42 d of age and fed a non-supplemented basal diet (control) or the basal diet supplemented with 40, 80 or 120 mg/kg of Zn as mentioned sources. Dietary zinc source had considerable effect on feed intake in all experimental periods. Increasing Zn level from 80 to 120 mg/kg decreased the average feed intake in the growth stage (p<0.01) and also in the entire experimental period (p<0.001). Similarly, the average daily gain during the entire trial period was affected by the type of Zn source (p<0.001) and supplemental level (p<0.01). One degree of freedom contrast comparisons showed that the inclusion of organic zinc sources into the diets caused significant increases in feed intake and body gain when compared with inorganic counterparts. Except in wk 1, dietary supplementation with organic sources improved (p<0.05) feed conversion ratio; FCR values were not affected by dietary Zn source or supplementation level. Breast meat yield increased with supplemental levels of organic Zn sources; however, other carcass parameters were not affected by dietary Zn source. On the other hand, organic versus inorganic zinc supplementation caused a significant increase in liver, breast and carcass weight percentages. The present findings suggest that supplemental levels of organic Zn compounds had beneficial effects on broiler performance, and Zn requirements can be reduced using these feed supplements in poultry rations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.163-165
• /
• 1999

The study was conducted to find the critical concentrations of zinc toxicity and to determine the changes of the contents of free proline and organic acids with treatment of different zinc chloride concentrations during rice germination and seedlings grown for seven days. The concentration of zinc chloride, 140 ppm, inhibited root elongation as much as 46 times compared with the control, and the germination rate was also decreased in all treatments of zinc chloride, showing that the germination rate decreased more with increasing concentrations of zinc chloride. Its rate was only 13% with treatment of 140 ppm zinc chloride. The content of free proline with treatment of zinc chloride, 140 ppm, was highest about 4,873 $\mu$M at 3 days compared with the control. Malic acid concentration with treatment of zinc chloride, 140 ppm, increased to approximately 4 times compared to the control. Citric and succinic acid content were also slightly increased in all treatments of zinc chloride.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.5
• /
• pp.339-348
• /
• 2000

The study was conducted on the effect of bath composition on the surface appearance, the hardness and the crystal orientation of zinc electrodeposits from the chloride bath. (1) The hardness of the zinc electrodeposits from the chloride bath was increased by suppressing mass transfer of zinc through adding the organic additives and the chlorine ion in the electrolyte. (2) The surface whiteness of zinc deposits was decreased due to the change of the preferred orientation from (002) , (103) to (101) , (100) through increasing the organic additives and chlorine ion in the electrolyte. (3) The addition of Cu, Sn, Ni or Co in the chloride bath elevated the hardness of the zinc deposits but darkened the surface whiteness. (4) The optimum condition of the organic additives and the chlorine ion for increasing the hardness of zinc deposits and preventing dark surface ranges 0.3 m1/1 to 0.4 m1/1 and 6.5 mol/1 to 6.8mol/l respectively.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.33-40
• /
• 2004

The eliminating of organic compound is essential process of the recovery of zinc sulfate from zinc sulfate waste water contained organic compound. The ozone oxidation and adsorption treatment is good for eliminating of organic compound in waste water. The zinc oxide treated an excess of sulfuric acid for zinc sulfate. We got zinc sulfate 740g from water 1kg.

• Preventive Nutrition and Food Science
• /
• v.15 no.2
• /
• pp.143-146
• /
• 2010

Organic zinc was included in the diet of broiler chickens to examine its effect on the skin characteristics and the expression level of skin proteins. Broiler chicks (Ross$\times$Ross) were fed a corn-wheat-soybean meal basal diet, either as control or containing an additional 80 ppm of zinc proteinate for 4 weeks, and then five broilers from each treatment were selected randomly, slaughtered, and their skin characteristics were examined. There were significant increases (p<0.05) in thigh skin epidermis and dermis thickness in the chicks fed organic zinc. Collagen content in the skin of broilers was also increased by the addition of organic zinc to the diet. 2D-gel electrophoresis patterns indicated that expression levels of the three proteins, glyoxylase 1, hypothetical protein, and dispersin B were affected by zinc feeding. These results suggest that adding organic zinc to the chicken's feed may contribute to decreased skin tearing.

• Journal of the Korean institute of surface engineering
• /
• v.11 no.3
• /
• pp.3-9
• /
• 1978

Organic compounds, such as aldehydes, amines, amides, sulfur compounds of polymers, have been added to cyanide Zinc electroplating bath to achieve in improvement of the brightness and of the current efficiency. It was found that the addition of only one compound o these organic compounds in the bath were unsuitable to be used for brightener, but mixure of aldehyde and reaction products obtained from epoxides and amines and/or amides were suitable for brightener in cyanide zinc electroprating baths.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.1019-1022
• /
• 2001

Negatively charged functional organic molecules such as retinoic acid, ascorbic acid, indole acetic acid, citric acid, salicylic acid, acidic dye (indigo carmine, Food Blue 1) are intercalatively encapsulated by zinc basic salt (hydrozincite) and layered double hydroxide. Such functional organic-inorganic nanohybrids are realized via coprecipitation reaction involving simultaneous formation of layered inorganic lattice and intercalation of anionic species. The heterostructural nature of these nanohybrids, their particle morphology and textural characterizations are mainly discussed on the basis of Powder X-ray Diffraction and Field Emission Scanning Electron Microscopy results.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.580-587
• /
• 2014

Composite films of zinc calcium alginate were prepared by a film maker from 7 wt% sodium alginate solution and then they solidified into 3, 5 wt% content $ZnCl_2$, $CaCl_2$ solution followed by washing and drying at room temperature. The characteristics were measured with several methods (antimicrobial activity, water solubility, swelling ratio and viscosity, SEM, EDS) and the film properties were investigated. Composite films of zinc calcium alginate showed an increase in the water resistance by increasing $ZnCl_2$ and $CaCl_2$ content and the antimicrobial test showed that the calcium alginate as well as zinc alginate films result in excellent antimicrobial activity in the two strains, Staphylococcus and Escherichia coli. The results show the possible improvement of the physical properties of composite films.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.734-740
• /
• 2016

The micron-sized indium zinc tin oxide (IZTO) particles were prepared by spray pyrolysis from aqueous precursor solution for indium, zinc, and tin and organic additives such as citric acid (CA) and ethylene glycol (EG) were added to aqueous precursor solution for indium, zinc, and tin. The obtained IZTO particles prepared by spray pyrolysis from the aqueous solution without organic additives had spherical and filled morphologies, whereas the IZTO particles obtained with organic additives had more hollow and porous morphologies. The micron-sized IZTO particles with organic additives were changed fully to nano-sized IZTO particles, whereas the micron-sized IZTO particles without organic additives were not changed fully to nano-sized IZTO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. Surface resistances of micron-sized IZTO's before post-heat treatment and wet-ball milling were much higher than those of nano-sized IZTO's after post-heat treatment and wet-ball milling. From IZTO with composition of 80 wt. % $In_2O_3$, 10 wt. % ZnO, and 10 wt. % $SnO_2$ which showed a smallest surface resistance IZTO after post-heat treatment and wet-ball milling, thin films were deposited on glass substrates by pulsed DC magnetron sputtering, and the electrical and optical properties were investigated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.265-265
• /
• 2015

Zinc Oxide 층은 역구조 유기 태양전지(Inverted Organic Photovoltaics, IOPV)에서 전자 수집 층으로 사용되는데, 전자 수집 및 전기 전도도 증가를 위하여 일반적으로 3차원 나노 구조체 및 양이온이 도핑된 Zinc Oxide 층이 사용된다. 본 연구에서는 저온 3차원 나노 구조체 및 음이온이 도핑된 Zinc Oxide 층을 적용하였으며, 그 결과 전자 수집 향상, 전기 전도도의 증가에 의하여 광전변환 효율(Power Conversion Efficiency, PCE)이 향상됨을 확인할 수 있었다.