• Title/Summary/Keyword: organic sulfur

검색결과 281건 처리시간 0.029초

알칼리 환원수 필터의 산화환원전위 안정화 평가 (Evaluation of the Stability of Oxidation-Reduced Potential (ORP) Using the Filter of the Alkaline Water)

  • 남상엽;권윤중
    • 전자공학회논문지
    • /
    • 제53권8호
    • /
    • pp.129-135
    • /
    • 2016
  • 본 연구는 알칼리 환원수기에 3가지 필터(활성카본, 중공사막, 카본블럭)를 이용해서 원수를 통과시켜 통수 양에 따른 산화환원전위(Oxidation Reduction Potential) ORP값이 안정화되는 것을 평가한 것이다. 알칼리 환원수기는 환원의 기능을 가지고 있는 물을 만드는 시스템으로 인체에 유익한 미네랄과 ORP값이 일반 물에 비해 매우 낮은 값을 가지고 있는 기능수이다. 필터를 통과한 물을 전기 분해하면 물속에 있는 음이온과 양이온은 격막을 통해서 -전극 쪽에는 칼슘($Ca^+$), 칼륨($K^+$), 마그네슘($Mg^+$), 나트륨($Na^+$)을 포함한 물로 인체에 유익한 미네랄이 포함된 알칼리 환원수를 얻고 +극에는 염소(Cl),인(P),유황(S)등 - 이온을 띄고 있는 유기물이 만들어 진다. 실험에서 알칼리 환원수(Alkaline Reduced Water)에서 전기분해의 전압의 크기를 조절하여 1단(pH8), 2단(pH8.5), 3단(pH9), 4단(pH9.5)으로 알칼리 환원수에 사용되고 -1단(pH6.0), -2단(pH5.0)의 산성산화수로 사용하고 있다. 이러한 시스템으로 3가지 필터에 통수하면서 ORP값이 어떻게 변화하고 어느 정도에서 안정화되는지를 평가하였고 대략 100L는 통수되어야 ORP값이 안정화하는 것을 측정하고 평가하였다.

접착제에서 발생하는 휘발성유기화합물(VOCs)에 대한 안정성 연구 (The Studies of Stability for Volatile Organic Compounds(VOCs) Generated from the Adhesives)

  • 이현경;위광철
    • 보존과학회지
    • /
    • 제31권3호
    • /
    • pp.243-254
    • /
    • 2015
  • 본 연구에서는 각종 재료에 의한 잠재적인 손상 검증 실험인 Oddy Test를 통해 금속유물 보존처리 과정에서 사용되는 접착제 및 코팅제를 선정하여 부식반응이 관찰된 시편으로 손상 원인을 확인하고자 한다. 6종의 접착제와 Fe, Pb, Cu, Ag 4종의 금속 시편을 사용하였다. 연구 결과, 중량 변화는 Cellulose계 접착제에 노출된 Fe시편이 29.87%로 높은 증가를 보였으며, Pb, Cu, Ag시편 순으로 증가율을 보였다. 색도 측정 결과는 Cellulose계 접착제의 변화값이 높게 나타났다. 접착제에서 발생하는 VOCs를 GC-MS로 분석한 결과, 접착제 6종 모두 Acetic acid가 검출되었다. 그 중 Cellulose계 접착제에서 다른 5종의 접착제와 비교하였을 때 1mg당 VOCs농도가 900배 이상 함량이 높았고, 소량의 Formic acid가 검출되었다. 이는 산성 불순물과 빛에 의해 촉진되기 때문으로 추측된다. 이 반응이 분자량 감소와 질소산화물과 다량의 산을 생성하는 결과가 되며 황변화 등 부식 촉진의 요인이 된다고 판단된다.

아플라톡신 오염 및 저감화 방안 (Contamination and Detoxification of Aflatoxins)

  • 조소연;강인호;심영훈;양동혁;오세욱;이병희;현성예;장승엽;정춘식;이용수;김영식;강신정
    • 생약학회지
    • /
    • 제38권3호통권150호
    • /
    • pp.205-216
    • /
    • 2007
  • South Korea is the representative consumption country of herbal medicines and most of herbal medicines circulating in Korea have been importing from the developing countries of Southeast Asia such as China, Vietnam, Indonesia and so forth. Domestic hygiene and safety are continuously proposed because herbal medicines which are circulating have the possibility could remain contaminants or residues. Physicochemical contaminants such as heavy metals, persistent organic pollutants, radionucleosides, microbial toxins, biological contaminants such as microorganisms and animals, agrochemical residues such as pesticides, substances used for fumigation, antiviral agents, and solvent residues are classified as major contaminants and residues in herbal medicines from 2005 September WHO.$^{1)}$ Currently our administration have established a permission standard and the inspection criteria against the heavy metal, the residual pesticides and a residual sulfur dioxide. Furthermore our administration is continuously monitoring and conducting researches for the policies and their scientific ground against herbal medicines. But the appearances or discoveries of the harmful new species due to environmental and industrial developments are becoming social problems. Therefore it may be necessary to continuously consider and investigate regarding hereupon. Recently, the contamination of the mycotoxins against foods such as cereals, nuts and the powdered red pepper have developed and started became problematic issue, and possibility of contamination against the herbal medicine is proposed. And since populations who are using the herbal medicines very limited to several nations, recognition and researches about contamination of mycotoxins in herbal medicines are very insufficient. Therefore it will be need to more focus on the international regulation of quality control and safety for herbal medicines. Now on, we are going to introduce the importance, occurrence, characteristic properties, World-wide research trends and detoxification of aflatoxins, which is known as the most potent mutagen, carcinogen and teratogen mycotoxins.

폐타이어 고무분말 재활용을 위한 화학적 탈황과 기계적 물성 평가 (Chemical Devulcanization for the Recycling of Rubber Powder of Waste Tires and Mechanical Properties)

  • 안주영;박종문;방대석;김봉석;오명훈
    • 자원리싸이클링
    • /
    • 제24권3호
    • /
    • pp.59-65
    • /
    • 2015
  • 세계적으로 폐타이어를 포함한 가황고무제품의 재활용 문제가 심각하게 대두되고 있다. 특히 자동차 수요량이 증대됨에 따라 발생하는 폐타이어는 매립이나 소각 시 가교결합 된 황 성분에 의해 2차 환경오염을 일으킨다. 또한 재생고무로 이용 시 가교 결합된 황에 의해 원료 고무와의 결합을 방해하여 적절한 물성을 가지지 못한다. 따라서 폐타이어 고무분말 재활용을 위해서 탈황 처리와 관련된 기술개발이 활발하게 이루어져 왔다. 탈황 처리 공정을 거쳐 재생된 폐타이어는 원료 고무와 혼합된 후 가황공정을 통하여 용도에 맞는 제품으로 제조 할 수 있다. 본 연구에서는 화학적 탈황법을 이용해 폐타이어를 탈황하여 탈황 정도를 분석하였다. 2-butanol 용액을 이용하여 온도, 탈황처리시간 등의 변수에 따른 탈황 효과를 살펴보았다. 고무시료를 유기용매에 팽윤한 후 100, 150, $200^{\circ}C$에서 1~5hr 동안 탈황처리 하였다. 그 후 평행팽윤법을 이용해서 수평균분자량과 가교밀도를 계산하여 정량적으로 탈황도를 분석하였다. 또한 Hot press를 이용하여 인장시편을 제조한 후 기계적 물성도 평가하였다.

인천항 하역장비 대기오염물질 배출량 산정 연구 (An Study on Estimating Cargo Handling Equipment Emission in the Port of Incheon)

  • 조정정;범태황;이향숙
    • 한국항만경제학회지
    • /
    • 제36권3호
    • /
    • pp.21-38
    • /
    • 2020
  • 최근들어 항만도시에서의 대기오염이 심각한 문제로 대두되고 있다. 그러나 항만의 하역기계에서 배출되는 온실가스는 선박, 트럭 등 타 수단에 비해 상대적으로 주목받지 못하였다. 본 연구에서는 인천항에서 디젤엔진으로 가동되는 하역기계로부터 배출되는 대기오염물질 배출량을 산정하였다. 이를 위해 각 항만하역사로부터 2017년 기준 하역장비의 대수, 제원, 가동시간 등 활동자료를 수집하였다. 분석 결과, CO 105.6톤, NOX 243.2톤, SOX 0.005톤, PM 22.8톤, VOC 26.0톤, NH3 0.2톤이 발생한 것으로 나타났다. CO와 NOX의 배출은 하역기계 전체 배출량의 87.71%를 차지하였으며, 크레인, 지게차, 트랙터, 로더의 배출량이 하역기계 전체 배출량의 84.79%를 차지하였다. 또한 노후화된 디젤엔진을 장착한 하역기계가 주 배출원임을 규명하였다. 분석된 대기오염물질 배출량 수치는 하역기계에 의한 항만 대기 오염의 심각성을 나타내며, 다음과 같은 친환경장비 도입이 시급함을 시사한다. 첫째, 오래된 디젤 장비의 LNG연료 또는 전기장비로의 교체가 필요하다. 둘째, NOX의 배출을 감소시킬 수 있는 선택적환원촉매(SCR)와 같은 후처리장비의 사용이 필요하다. 향후 체계적이고 공식적인 국가 대기오염배출 인벤토리 정립 방법을 설정하고, 매년 하역기계에서 배출되는 대기오염물질 배출량을 모니터링 및 평가하는 것이 필요하다.

태양광 $TiO_2$ 광촉매를 이용한 Parathion의 분해와 독성저감에 관한 연구 (A Study on the Degradation of Parathion and Reduction of Acute Toxicity in Solar $TiO_2$ Photocatalysis)

  • 김탁수;김정곤;최경호;조경덕
    • 대한환경공학회지
    • /
    • 제27권8호
    • /
    • pp.822-828
    • /
    • 2005
  • 본 연구에서는 대표적인 유기인계 농약인 parathion을 대상으로 태양광의 조사 하에 $TiO_2$ 광촉매반응과 광반응에 의한 처리를 수행하였다. 실험의 결과 $TiO_2$ 광촉매반응이 광반응과 $TiO_2$ 흡착 조건에 비하여 효과적으로 parathion을 제거시켰다. 10 mg/L의 parathion은 90분 이내에 광촉매 반응으로 완전히 제거되었으며 반응시간 150분 후에 TOC는 약 63% 정도 감소되었다. 광촉매 반응에 의한 parathion의 분해에 따라, 질소 형태의 이온 부산물은 ${NO_2}^-$, ${NO_3}^-$, 그리고 ${NH_4}^+$가 발견이 되었고, 황은 ${SO_4}^{2-}$로 약 80%, 그리고 인은 ${PO_4}^{3-}$로 5% 이하로 회수되었다. 또한 parathion의 분해시 유기중간 생성물은 paraoxon과 4-nitrophenol 등이 측정되었으며, 이들 부산물들은 반응이 진행되어 가며 계속 분해됨을 보였다. 광촉매 반응과 광반응에 의하여 처리된 용액의 독성의 감소를 평가하기 위하여 두 가지 생물종인 V. fischeri와 D. magna를 이용하여 처리수의 급성 독성의 감소를 알아보았다. 두 가지 생물종 모두 광촉매반응 조건에서는 처리수의 상대독성이 초기에 비해 반응시간 150분 후에 거의 모두 감소되었고, 광반응 조건에서는 V. fischeri와 D. magna 각각에 대해서 76%와 57%의 상대독성 감소가 관찰되었다. Parathion과 TOC의 감소와 급성독성의 저감양상은 유사한 경향을 보였다.

환경오염(環境汚染)이 식물군집(食物群集)에 미치는 영향(影響)에 관(關)한 연구(硏究) (Studies on the Effect of Environmental Pollution on the Structure of Plant Community)

  • 김태욱;이경재;박인협;김준선
    • 한국환경농학회지
    • /
    • 제2권1호
    • /
    • pp.35-44
    • /
    • 1983
  • 울산공업단지내(蔚山工業團地內)에 위치(位置)한 돗질산식생(植生)을 오염원(汚染源)에서부터의 거리에 따른 조사구별(調査區別) 환경요인(環境要因)과 식생상태(植生狀態)를 분석(分析)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 토양(土壤)의 전질소함양(全窒素含量), 유기물함량(有機物含量), $P_2O_5$의 함량(含量), CEC는 오염원(汚染源)에서 거리가 멀어질 수록 증가(增加)를 하며, Al함량(含量)은 감소(減少)를 한다. 2) 식생조사결과(植生調査結果) 방동사니, 실새풀, 도깨비바늘, 댕댕이덩굴, 바랭이, 여뀌, 곰솔, 돼지풀, 철쭉, 아카시나무등(等)이 내오염성(耐汚染性)이 강(强)한 식생(植生)이었다. 3) 대기오염(大氣汚染)의 피해(被害)가 심(甚)하지 않은 곳에서는 13종(種)의 식물(植物)이 출현(出現)하나, 오염(汚染)이 극심(極甚)한 조사국(調査局)에서는 7종(種)의 식물(植物)만이 존재(存在)한다. 4) 대기오염(大氣汚染)의 증가(增加)에 따라 개체수(個體數), 종다양도(種多樣度), 균재도(均在度), 류사도지수(類似度指數)가 감소(減少)한다. 5) 대기오염원(大氣汚染源)에서의 거리가 멀어질 수록 물질생산량(物質生産量)이 증가(增加)된다. 또한 돗질산지역(地域) 아카시나무림분(林分)은 현존량(現存量)은 4.41t/㏊, 년간물질생산량(年間物質生産量)은 $0.67ton/ha{\cdot}yr$이고, 오염(汚染)의 피해(被害)가 없는 대조구(對照區)에서의 현존량(現存量)은 39.47ton/㏊이고, 년간물질생산량(年間物質生産量)은 $7.73ton/ha{\cdot}yr$이다.

  • PDF

環境汚染의 解決을 위한 綜合科學的 接近方法 (I) (An Interdisciplinary Approach for the Solution of Enviromental polution)

  • 신현덕
    • 한국표면공학회지
    • /
    • 제12권3호
    • /
    • pp.207-216
    • /
    • 1979
  • Environmental pollution or contaminations caused by various kinds of pollutants have become one of most serious problems of our time. Environ mental pollution is the unfavoralble alteration of our surroundings, through direct or indirect effects of changes in energy patterns, rediation levels, chemical and physical constitution and abundances of organisms. These changes may affect humans directly or through their supplies of water and of agicultural and other biological products, their physical objects or possessions, or their opportunities for recreation and appreciation of nature. Pollutants that meet the criteria of this definition of environmental pollution are numerous: gases (such as sulfur dioxide and nitrogen oxides) and paniculate matter (such as smoke particles, lead aerosols, and asbestos) in the atmosphere; pesticides and radioactive isotopes in the atmosphee and in waterways; sewage, organic. chemicals, and phosphates in water; solid wastes on land; excessive heating (thermal pollution) of rivers and lakes; and many others. Some of these pollutants are introduced into the environment naturally, others by human actions, and most in both ways. Our major concer is with environmental pollution resulting wholly or largely as a by-product of human activities, because these can be controlled most readily. Environmental pollution cannot be solved by science and technology alone. It should be handled by an interdisciplinary approach with combined methods of science and technology as wen as social science disciplines for the better solution of this critical problem. In this respect, introducing "Environmental Science," a new scientific approach for the solution of environmental problems, which is now widely accepted by most developed countries of the world will be very helpful for systematization of theoretical basis for a new scientific approach to environmental pollution. Environmental science is "the study of all systems of air, land, water, energy, and life that surround Man. It includes all sciences directed to the system-level of understanding of the environment, drawing especially upon such disciplines as meteorology, geophysics, oceanography, and ecology, and utilizing to the fullest knowledge and techniques developed in such fields as physics, chemistry, biology, mathematics and engineering as well as many social science disciplines, such as economics, such as economics, law, political science and public administration." The components of this discipline are not new, for they are drawn from existing areas of science within biology chemistry, physics, and geoscience. What is really new about environmental science, however, is it siewpoint - its orientation to global problems, its conception of the earth as a set of interlocking, interacting systems, and its interest in Man as a part of these systems.

  • PDF

노동생산성 향상을 위한 유해작업환경관리에 관한 연구 (A study on the management of harmful working environments for Increase of Labor productivity.)

  • 조태웅;유익현;박성애
    • 한국환경보건학회지
    • /
    • 제3권1호
    • /
    • pp.27-44
    • /
    • 1976
  • This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

  • PDF

지능형 무선통신용 가스 센서 모듈 구현 (The Realization on GAS Sensor Module for Inteligent Wireless Communication)

  • 김효찬;원영수;조형래
    • 한국ITS학회 논문지
    • /
    • 제11권6호
    • /
    • pp.123-132
    • /
    • 2012
  • 가스센서는 그 용도에 따라서, 자동차용(배출가스, 연료혼합 가스, 산소, 분진), 농수산 식품산업용(신선도, 저장, $CO_2$, 습도, $NH_3$, 질소산화물 가스, 유기가스, 농약 및 살충제로부터 방출되는 유독가스), 산업 의료용(석유화학제품 가스, 수소, 산소, 유독가스), 군사용(화학무기 가스), 환경 측정용(CO를 비롯한 황과 질소 등으로 구성된 대기오염가스), 가정용(LNG, LPG, 부탄, 실내공기, 습도) 등으로 매우 다양하게 사용하고 있다. 산업 현장의 유해물질 종류는 약 700종으로 알려져 있으며 이들 중 대다수의 물질은 일반적인 환경 조건에서 가스 형태로 존재한다. 본 연구에서는 이러한 유독 가스들 중에서 차량 내부 등의 밀폐된 공간에서 발생하기 쉬운 중요한 탄소(CO), 이산화탄소($CO_2$), 암모니아 ($NH_3$)의 세 가지 가스를 검출하는 휴대용 가스센서 모듈을 구현하고자 한다. 유독 가스 중에서도 가장 인명 사고의 중요한 요소인 NH3, $CO_2$, CO의 3종류 가스를 검출하는 다중 가스검출 센서에 대해 연구한다.