• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.89-92
• /
• 2012

The effect of organic impurities on the electrical properties of a neat epoxy resin was studied. 0.05, 0.5 and 1.0 phr of iso-propyl alcohol (IPA) and methylene chloride (MC) mixture (50/50 wt%) were used as impurities. The current density, volume resistance and impedance characteristics of the epoxy/IPA/MC systems were measured with a high voltage source meter and broadband dielectric spectroscopy. Glass transition temperature (Tg) was measured by a differential scanning calorimetry (DSC) and it was found that Tg decreased slightly with increasing IPA/MC content. It was also found that Tg values of the epoxy systems with various IPA/MC contents were closely related to the current density, volume resistance and impedance characteristics.

• 한국응용과학기술학회지
• /
• 제10권1호
• /
• pp.9-22
• /
• 1993

Recent studies on enzyme reactions in organic solvents are revived. The reactions are classified into three categories: heterogeneous, biphasic and homogeneous systems. The following subjects are described and discussed about the heterogeneous system. 1) The maximal expression of enzyme activity in organic solvents in terms of water content, hydration of enzyme, and equilibriun of water between enzyme and substrate solution. 2) Solvent effect on the catalytic power of enzyme. 3) Thermostability and thermoreactivity. 4) Applications of the enzyme reactions to synthetic chemistry.

• 한국미생물·생명공학회지
• /
• 제24권2호
• /
• pp.222-226
• /
• 1996

The enzymatic synthesis of 3, 4-dihydroxyphenyl-L-alanine (L-DOPA) was examined for the effects of the reaction additives such as sodium borate, alcohol, and organic solvents. The enzyme used was tyrosine phenol-lyase of Citrobacter freundii KCTC 2006 produced in Escherichia coli. The amounts of tyrosine phenol-lyase and pyridoxal-5-phosphate were optimized to 2.0 units/ml and 0.1 mM, respectively, for the synthetic reaction. Sodium borate, a substance that forms a complex with pyrocatechol, reduced the enzyme deactivation by pyrocatechol although it seriously inhibited the enzyme activity. Among the organic solvents tested, dimethylsulfoxide, dimethylformamide, and alcohol increased the productivity of the L-DOPA synthesis. In a reaction system with 5% methanol, L-DOPA concentration increased up to 210 mM after 24 hours, and 77.1% of which was separated as precipitates. The L-DOPA was purified to 99.96% by solubilizing and recrystallyzing the precipitates.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권3호
• /
• pp.34-40
• /
• 2000

지용성 용존 유기물을 해수로부터 효율적으로 추출할 수 있는 고체상 추출 (solid phase extraction)장치를 새로이 고안하였다. 본 장치는 octadecyl silane (ODS) cartridge와 압력 평형 마개, 96 multifolder, 아스피레타 형 진공 펌프로 구성하였다. 본 장치는 기존의 액체-액체 추출법보다 회수 효율은 1.4 배 이상 증대시켰으며, 최소 시료량을 8 배 이상 감소 시켰다. 따라서 용매의 사용을 5 배 이상 감소시킬 수가 있으므로 나중에 사용된 용매를 제거하는 노력도 크게 감소시켰다. 뿐만 아니라 96 개의 시료(각 1ℓ)를 동시에 처리할 수 있으므로 지용성 용존 유기물의 추출 과정을 반자동화시킨 획기적인 장치이다. 본 장치를 통하여 황해 해수 시료에서 추출된 용존 탄화수소의 정성 및 정량 분석 결과 본 장치가 효율성과 신뢰성에서 기존의 액체-액체 추출법을 대체할 수 있을 것으로 사료된다.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.725-731
• /
• 2003

The effect of organic processing parameters on the dispersion stability of the BaTiO$_3$-based dielectric particles and borosilicate glass particulate suspensions was investigated in a system where organic solvents, dispersant, binder and modifier were used as processing additives in a low temperature cofired ceramic fabrication processes. Two- and three-component organic solvents were used to disperse ceramic particles and it was found the better stability in the particulate suspension prepared in a bi-solvent, which was consists of toluene and ethanol in a non-azeotropic composition. The addition amount of organic additives had a great impact on dispersion in the present investigation. The flow curves of the suspensions prepared with binder and modifier were fitted according to the power-law equation, which indicates that the internal structure of the suspension could be disturbed under the applied shear stress. Finally, the LTCC green tapes were successfully tape-cast based upon the optimum formulation of LTCC suspension and its microstructure was compared with that of the hard-agglomerates.

• 한국산업융합학회 논문집
• /
• 제6권1호
• /
• pp.31-36
• /
• 2003

8개의 수정진동자 위에 서로 다른 종류의 Lipid를 코팅하여서 만든 센서 배열을 가지고 유기용매를 인식할 수 있는 System을 구성한다. 유기용매 인식센서에 대한 수학적 모델을 사용하여 여러 가지 유기용매에 대한 센서의 응답으로부터 센서 표면과 유기용매 간의 물질 전달속도 패턴과 친화력 패턴을 얻어 유기용매 종류를 인식하였다. 패턴인식은 인공신경망을 이용하였으며 인공신경망의 연결 강도 수정은 Levenberg-Marquardt 알고리즘을 사용하였다. 신경망의 출력은 4개로 하였고, 디지털 신호인 0과 1의 조합으로 유기용매 종류를 구분하였다. 이 시스템을 이용하여 9개의 유기용매 Acetone, Benzene, Chloroform, Carbon-tetrachloride, Ethylacetate, Buthylacetate, Cyclohexane, Dichloromethane, 1,1,2,2,Tetrachloroethane, 2,2,4Trimethylpentane을 구분하여 인식할 수 있었다.

• 폴리머
• /
• 제25권5호
• /
• pp.609-616
• /
• 2001

본 연구에서는 copper phthalocyanine (CUPc)을 높은 합성 수율로서 성공적으로 합성시킴에 따라 용매를 사용하는 고분자의 합성 분야에 마이크로파 기술의 응용 가능성을 제시하고자 하였다. 가정용 전자레인지의 용기를 개조시키고 마이크로파 출력 조절기를 부착시키는 방법으로 본 실험에 사용되는 가변식 마이크로파 합성 장치를 자체 제작하였다. 화학 분석법, X선 회절장치(XRD), 주사형 전자현미경 (SEM) 및 입도 분석법 (PSA)을 이용하여 재래식 열 공정 및 마이크로파 공정을 사용하여 여러 조건하에서 합성된 시료들의 특성을 비교 분석하였다.

• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.479-485
• /
• 1996

Volatile organic compounds are air pollutants exhausting from industrial process, evaporation of solvent, and so on. Most of VOCs are the combustible gas of low calorific value as it is diluted by air. The systems burning such a hazardous gas need to increase enthalpy in order to increase flame stability. In this study an incinerator with reciprocating flow in the honeycomb ceramic has been used for the experiment of VOCs control. By the reciprocating flow system, the enthalpy of combustion gas is effectively regenerated into the enthalpy increases of the combustible gas through the honeycomb ceramic, which provides a heat storage. The position of the reaction zone is strongly dependent on the parameters of mixture velocity and time frequency. Flame front is changed to the point where burning velocity is coincided with burning velocity in the honeycomb ceramic. In this system it is important that flame front should be located symmetrically at the center of honeycomb ceramic for the purpose of increasing the reaction rate at one point. Peak temperature becomes higher with decreasing time frequency, at which the flow direction is regularly reversed.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.112-115
• /
• 2002

본 연구에서는 균주의 배양과 동시에 생산물을 회수할 수 있는 동시추출공정을 건조질량의 $15{\sim}75$ %의 탄화수소를 생산한다고 알려진 B. braunii 배양에 적용하고자 한다. 일반적인 tow-phase 동시 추출공정의 적용시 B. braunii의 경우 생산된 탄화수소가 균주 외벽의 matrix에 강하게 부착되어 있기 때문에, two phase 추출공정 적용시 bubble solumn내에서 단지 폭기에 의한 교반만으로는 충분한 탄화수소의 회수율을 얻을 수가 없었다. 본 연구에서는 배양액과 유기용매층의 접촉기회를 증대시킨 two-stage 동시추출 공정을 개발하여 기존의 two-stage 동시추출 공정보다 2배 이상 높은 57 %의 탄화수소 회수율을 얻을 수가 있었고, 이를 회분배양후 후속분리공정으로 이용할 경우 6시간 추출후 62 %의 회수율을 얻을 수가있었다.

• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.85-91
• /
• 2001

The regulation of Material safety data sheets(MSDS) was required for the chemicals in use in the workplace from July 1976. Under the provisions of the workplace hazardous materials information system, employers in Korea must be provided with accurate and comprehensive MSDS. To examine the reliability of MSDS for organic solvents, 63 organic solvents and MSDS were collected from the workplace of 39 companies located in Kyonggi province. Manufacture\`s MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. 38 solvents were able to analyze their composition by gas chromatography-mass selective detector(GC-MSD). Among them, 28 solvents were incorrect in their composition and contents. In some case, health hazardous or carcinogenic chemicals which were not included in the MSDS were detected from samples. As a result of evaluating whether the MSDS correspond to the regulation required by Industrial Safety and Health Act (ISHA), the information in the MSDS including hazard classification, occupational exposure level, toxicity, regulatory information were incorrectly provided, and some MSDS did not disclose carcinogenic in their MSDS, and some MSDS were not written in the standard format. From this survey, continuous monitoring and promoting correct MSDS, and analyzing the components of the solvents were required to endure the reliability of MSDS for organic solvents.