• Rapid Communication in Photoscience
• /
• v.1 no.2
• /
• pp.63-63
• /
• 2012

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.118-120
• /
• 2009

We reported that the evidence of oxygen doping to copper-phthalocyanine (CuPc) by $O_2$-plasma treatment to Au electrode of inverted top emitting organic light emitting diodes (ITOLEDs). The operation voltage of OLEDs at 150 mA/$cm^2$ decreased from 16.1 to 10.3 V as oxygen atoms indiffued to CuPc layer using $O_2$-plasma. Synchrotron radiation photoelectron spectroscopy results showed that a new bond of Cu-O appeared and the energy difference between the highest occupied molecular orbital and $E_F$ is lowered by 0.20 eV after plasma treatment. Thus the hole injection barrier was lowered, reducing the turn-on voltage and increasing the quantum efficiency of OLEDs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.374-374
• /
• 2012

Nowadays, Active Matrix Organic Light-Emitting Diodes (AM-OLEDs) are the superior display device due to their vivid full color, perfect video capability, light weight, low driving power, and potential flexibility. One of the advantages of AM-OLED over Liquid Crystal Display (LCD) lies in its flexibility. The potential flexibility of AM-OLED is not fully explored due to its sensitivity to moisture and oxygen which are readily present in atmosphere, and there are no flexible encapsulation layers available to protect these. Therefore, we come up with a new concept of Inorganic-Organic hybrid thin film as the encapsulation layer. Our Inorganic layer is Al2O3 and Organic layer is F-Alucone. We deposited these layers in vacuum state using Atomic Layer Deposition (ALD) and Molecular Layer Deposition (MLD) techniques. We found the results are comparable to commercial requirement of 10-6 g/m2 day for Water Vapor Transmission Rate (WVTR). Using ALD and MLD, we can control the exact thin film thickness and fabricate more dense films than chemical or physical vapor deposition methods. Moreover, this hybrid encapsulation layer potentially has both the flexibility of organic layers and superior protection properties of inorganic layer.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3645-3650
• /
• 2012

Two new blue emitting cationic iridium(III) complexes with two substituted 2-phenlypyridine ligands as main ligands and one 2,2'-biimidazole as an ancillary ligand, $[(L1)_2Ir(biim)]Cl$ (1) and $[(L2)_2Ir(biim)]Cl$ (2), where L1 = 2-(2',4'-difluorophenyl)-4-methylpyridine, L2 = 2-(2',4'-difluoro-3'-trifluoromethylphenyl)-4-methylpyridine and biim = 2,2'-biimidazole, were synthesized for applications in phosphorescent organic light-emitting diodes (PhOLEDs). Their photophysical, electrochemical and electroluminescent (EL) device performances were examined. The photoluminescent (PL) spectra revealed blue phosphorescence in the 450 to 485 nm range with a quantum yield of more than 10%. The iridium(III) compounds studied showed good solubility in organic solvents with no solvatochromism dependent on the solvent polarity. The solution-processed OLEDs were prepared with the configuration, ITO/PEDOT:PSS (40 nm)/mCP:Ir(III) (70 nm)/OXD-7 (20 nm)/LiF (1 nm)/Al (100 nm), by spin coating the emitting layer containing the mCP host doped with the iridium phosphors. The best performance of the fabricated OLEDs based on compound 1 showed an external quantum efficiency of 4.5%, luminance efficiency of 8.52 cd $A^{-1}$ and blue emission with the CIE coordinates (x,y) of (0.16, 0.33).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1779-1783
• /
• 2006

The hybrid thin-film (HTF) passivation layer composed of the UV curable acrylate layer and MS-31 (MgO:SiO2=3:1wt%) layer was adopted in organic light emitting diode (OLED) to protect organic light emitting materials from penetrations of oxygen and water vapors. The moisture resistance of the deposited HTF layer was measured by the water vapor transmission rate (WVTR). The results showed that the HTF layer possessed a very low WVTR value of lower than $0.007g/m^2$ per day at $37.8^{\circ}C$ and 100% RH. Therefore, the HTF on the OLED was found to be very effective in protect what from the penetrations of oxygen and moisture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.787-790
• /
• 2009

High contrast red, green and blue organic light-emitting diodes were fabricated using inorganic metal multi layer composed of thin Al, KCl and thick Al and then were compared to optical and electrical characteristics with the attached polarizer and conventional OLEDs. Ambient light reflection of OLED using inorganic metal layer, polarizer and conventional metal layer were 29.2, 31.1 and 82.5% respectively. Optical characteristics of OLEDs using inorganic metal layer were max luminescence of 13040 cd/m2 and luminous efficiency of 2.12 cd/A at 8V whereas OLEDs using polarizer has 8456 cd/m2 and 1.43 cd/A at 8V each. OLEDs including inorganic metal multi layers show significant technical advantages in achieving high performance of OLED display with improved contrast ratio of 251:1, specifically in Red OLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.443-445
• /
• 2008

We have fabricated vertical type organic thin film transistor using $C_{60}$ as a n-type active material to improve the problems of conventional OTFTs. In general, it can be argued that the characteristics of organic transistor were influenced by carrier mobility and density. We have used several kinds of metals as source and gate electrodes to optimize the device characteristics using $C_{60}$. In addition, we have examined the feasibility of fabrication of organic light-emitting transistor (OLET) using MEH-PPV as an emission layer.

• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.35-38
• /
• 2007

FTriphenylamine dye compound having diheteryl moiety was synthesized and its photoluminescent property was investigated. Organic luminescent materials have received great attentions due to potential application subjects onto full color image displays. In this context, the dye (III) for light emitting materials was synthesized using 2-(4-amino-2-hydroxyphenyl)benzoxazole (I) and 4,4'-diformyltriphenylamine (II). It is well known that the amino groups of compound (I) react with carbonyl groups, especially an aldehyde, to afford azomethine linkages. The dye shows bulish-green fluorescence property, which is anticipated for the light-emitting material for display devices. In this context, our aim is to synthesize diheteryl-substituted triphenylamine fluorescent dye as an emitting material. The spectroscopic characteristics and the fluorescent properties of this dye molecule were examined and determined.

• Journal of Information Display
• /
• v.9 no.2
• /
• pp.18-21
• /
• 2008

We report on white organic light-emitting diodes (WOLEDs) based on single white dopants, $Ir(pq)_2$($F_2$-ppy) and $Ir(F_2-ppy)_2$(pq), where $F_2$-ppy and pq are 2-(2,4-difluorophenyl) pyridine and 2-phenylquinoline, respectively. The similar phosphorescent lifetime of two ligands lead to luminescence emission in two ligands simultaneously. However, the emission color of the devices was reddish, because the energy was not transferred efficiently from the 4,4,N,N'-dicarbazolebiphenyl (CBP) to the $F_2$-ppy ligand, due to the small band gap of the CBP. Accordingly, we used 1,4-phenylenesis(triphenylsilane) (UGH2) with a large band gap, instead of CBP as the host material. As a result, it was possible to adjust the emission color by the host material. The luminous efficiency of the device with $Ir(F_2-ppy)_2$(pq) doped in UGH2 was about 11 cd/A at 0.06 cd/$m^2$.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.237-241
• /
• 2005

We present a device model for organic light emitting diodes(OLEDs) which includes charge injection, transport, recombination, and space charge effects in the organic materials. The model can describe both injection limited and space charge limited current flow and the transition between them. Calculated device current, light output, and quantum and power efficiency are presented for different cases of material and device parameters and demonstrate the improvements in device performance in bilayer devices. These results are interpreted using the calculated spatial variation of the electric field, charge density and recombination rate density in the device. We find that efficient OLEDs are possible for a proper choice of organic materials and contact parameters.