• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.310-315
• /
• 2008

실란커플링제인 glycidoxypropyl trimethoxysilane(GPTMS)과 vinyltriethoxysilane(VTES)을 출발물질로 하여 sol-gel 법에 의해 유-무기 혼성 용액을 제조하였다. 이 용액에 spiropyran계 광 변색 염료를 ethylacetate에 용해시킨 용액을 혼합하여 광 변색 코팅 용액을 제조하였다. 그 후 기재인 polycarbonate 시트에 스핀 코팅 시키고 $100^{\circ}C$에서 2 h 동안 열 경화시켜 광 변색성을 갖는 하드 코팅 막을 제조하였다. 코팅 막은 UV 광을 조사함에 의해 투명색으로부터 푸른색으로 변했다가 다시 투명색으로 변하는 가역적인 색변화를 보여주었다. 이때 코팅 막의 소색속도 및 연필경도는 코팅 용액 중의 GPTMS의 mol비가 증가됨에 따라 증가하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.399-405
• /
• 2018

We report the fabrication of organic field-effect transistors (OFETs) via spray coating of electrochemically exfoliated graphene (EEG) and conducting polymer hybrid as electrodes. To reduce the roughness and sheet resistance of the EEG electrodes, subsequent coating of conducting polymer (poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)) and acid treatment was performed. After that, active channel layer was developed by spin coating of semiconducting poly(3-hexylthiophene) on the hybrid electrodes to define the bottom gate bottom contact configuration. The OFET devices with the EEG/PEDOT:PSS hybrid electrodes showed a reasonable electrical performances (field effect mobility = $0.15cm^2V^{-1}\;s^{-1}$, on/off current ratio = $10^2$, and threshold voltage = -1.57V). Furthermore, the flexible OFET devices based on the Polydimethlsiloxane (PDMS) substrate and ion gel dielectric layer exhibited higher electrical performances (field effect mobility = $6.32cm^2V^{-1}\;s^{-1}$, on/off current ratio = $10^3$, and threshold voltage = -1.06V) and excellent electrical stability until 1000 cycles of bending test, which means that the hybrid electrode is applicable to various organic electronic devices, such as flexible OFETs, supercapacitors, organic sensors, and actuators.

• 플랜트 저널
• /
• 제16권3호
• /
• pp.47-52
• /
• 2020

본 연구에서는 알루미늄으로 제작된 심해 장비의 부식 저항 능력 향상시키기 위해 알루미늄 부식 방지 방법과 측정방법을 조사하였다. 조사된 부식 방지 방법은 Cathodic Protection(음극화 보호), Conversion Coating, Anodizing, 및 Organic Coating이었다. 그리고 간단하게 조사된 측정 방법은 Scanning Electron Microscope (SEM), Electrochemical Impedance Spectroscopy (EIS), Glow discharge optical emission spectrum spectroscopy (GD-OES), Fourier Transform Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), Scanning Vibrating Electrode Technique (SVET), Contact Angle(접촉각), Interfacial Tension (경계면 장력)이었다. 알루미늄 부식을 방지하기 위해 널리 사용되는 방법은 Anodizing과 Organic Coating이었으며, 부식 측정을 위해서는 여러 방법들이 골고루 사용되었다. 그 중 많이 사용되는 방법은 표면의 구조를 관찰하 위한 SEM과 부식 저항 능력을 측정하기 위한 접촉각 측정이었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.806-809
• /
• 2009

Epoxy functionalized organic-inorganic hybrid materials (hybrimers) were synthesized by sol-gel reaction for application in OLED barrier coating. By using the calcium degradation method, the oxygen transition rate (OTR) and water vapor transition rate (WVTR) measured so far is $10^{-2}cc/m^2$-day for oxygen and $10^{-1}g/m^2$-day for water molecules with single hybrimer coating film, respectively. Encapsulated OLED devices have life time of 14hrs of a single hybrimer barrier coating and 29hrs of hybrimer/inorganic double barrier coatings at $25^{\circ}C$ and 60% relative humidity.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.307-315
• /
• 1993

A study on a new anti-finger printed EGI steel sheet with high corrosion resistance has been carried out to meet the recent requirement of high quality and performance of the pure zinc electrogalvanized steel sheet. The substrate was the pure zinc electrogalvanized sheet with the metallic coating of 20g/$\m^2$. The two differ-ent processes for inorganic(chromating) and organic(resin) coating were applied. One was a two coat/two bake type to separately treat chromating and resin coating which is now widely used. The other was a one coat/one bake type to simultaneously treat them which is newly developed in this study. The solution for the one coat/one bake type was an aqua-base coating agents which was composed of inorganic and organic components. The new anti-finger printed EGI steel sheet with the Cr and resin coating weight of 13mg/$\m^2$ and 800mg/$\m^2$, respectively shows the superior corrosion resistance besides the good paintability, formability fingerprint resistance and earth characteristics properties.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.187.2-187
• /
• 2002

• 폴리머
• /
• 제38권5호
• /
• pp.573-579
• /
• 2014

탄소나노튜브(CNT), 불소계 아크릴레이트 2,2,2-trifluoroethylmethacrylate(3FMA) 및 유-무기 조성비와 같은 합성조건을 달리하여 제조된 자외선 경화형 유-무기 하이브리드 코팅 막의 표면특성 및 내오존성에 대해 연구하였다. 코팅 막은 금속 알콕사이드 전구체인 tetraethoxysilane(TEOS)와 실란 커플링제인 methacryloyloxypropyltrimethoxysilane (MPTMS)로 구성된 유-무기 혼성 용액에 탄소나노튜브 및 3FMA와 자외선 경화를 위한 유기물을 첨가하여 제조된 코팅제를 자외선 경화시켜 제조하였다. 제조된 코팅 막의 내오존성 및 기재와의 접착력은 TEOS, 3FMA 및 CNT의 함량에 크게 영향을 받는다는 것을 확인하였다. 특히, 탄소나노튜브가 첨가된 코팅 막은 우수한 내오존성 및 접착력 뿐만 아니라 높은 표면경도를 나타내었다. TEOS의 경우, 함량이 증가할수록 표면경도 및 내오존성은 향상되었지만, 기재와의 접착력은 감소되었다. 불소아크릴레이트 3FMA의 경우, 함량이 증가할수록 내오존성은 향상되었지만 표면경도는 감소하였다.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.178-183
• /
• 2022

For enhancing the flame-retardant properties of wallpapers, we developed an organic-inorganic hybrid solution with ZrSiO₄ as a functional ceramic powder, coated on non-woven fabric using dip coating, spray coating, and slot-die coating methods. Their flame retardant properties were characterized by a 45° combustion tester, which is manufactured according to the flame-retardant performance standard (KOFEIS 1001 and KS F 2819). In organic-inorganic hybrid solution, with increasing the concentration of acid-catalyst (acetic acid), the precipitation of ZrSiO₄ powders increased, and the flame retardant properties decreased. The highest flame retardant result was obtained for the solution adding 5 wt% acetic acid. The optimization of the coating method and coating number resulted in the most excellent flame-retardant properties being obtained for the non-woven fabric coated for 5 or 7 times by dip coating method, and their flame-retardant properties corresponded to class 2 flame-retardant performance of wallpapers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.392.2-392.2
• /
• 2014

Poly (vinylidene fluoride) thin films were deposited by a spray-coating technology. Two organic solvents with different boiling point were used to prepare the mixture solution for spray coating process: N-Methylpyrrolodone ($B.P.=202^{\circ}C$); Tetrahydrofuran ($B.P.=66^{\circ}C$). Post-deposition annealing temperature was varied for the spray-coated Poly(vinylidene fluoride) thin films. Structural characteristics of the thin films were comparatively investigated by FT-IR and XRD in relation with the organic solvent and post-deposition annealing temperature.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.240-246
• /
• 2011

UV-Curable hybrid coatings were synthesized to improve the surface properties of plastic film. Organic-inorganic coating solutions were prepared by the sol-gel method using urethane-acrylate oligomer, acrylate monomer, photo initiator and tetraethoxysilane (TEOS). Methacryloyloxypropyltrimethoxysilane(MPTMS) was used as a silane coupling agent to improve chemical interaction between inorganic phases and UV curable acrylate. In this study, the surface hardness and adhesive properties were improved with the use of inorganic component. The experimental results showed that UV-Curable hybrid films containing aliphatic urethane oligomer, hexanedioldiacrylate, trimethylolpropanetriacrylate, hydroxy dimethyl acetophenone exhibited good surface properties. Also, the optimum curing conditions were investigated.