• 제목/요약/키워드: ore body

검색결과 103건 처리시간 0.02초

홍천 철-희토류광체의 발달양상 (Developmental Aspects of Hongcheon Fe-REE Ore Body)

  • 이한영;류충렬
    • 암석학회지
    • /
    • 제21권4호
    • /
    • pp.397-403
    • /
    • 2012
  • 홍천 자은리에 분포하는 탄산염암류 기원의 철-희토류 광화대는 북부, 중부, 그리고 남부의 3개 광체가 남-북 방향으로 단속적으로 발달하고 있는데 지질구조 분석을 통해 이들의 분포와 연장특성을 파악하였다. 북부광체 및 중부광체 일대의 편마암에서의 엽리는 북북동 방향을 보이나, 광체의 남쪽으로 가면서 북동에서 동북동 방향으로 방향이 바뀌며 남부광체 부근에서는 다시 남-북 방향을 보이고 있다. 기하학적으로 분석되는 이 일대의 습곡은 자은교에서 새마을교 까지 북서쪽으로 오목하게, 완만하게 열린 습곡(open fold)으로 습곡축이 북서쪽으로 약 $45^{\circ}$ 침강하는 향사를 이루며, 새마을교 서측의 약수터 부근에서는 습곡축이 북서 방향으로 약 $45^{\circ}$ 침강하는 소규모의 배사를 이루고 있다. 이들 습곡은 약수터에서 새마을교 쪽으로 달리는 서북서 방향의 우수향 주향이동단층에 의해 단층끌림의 효과도 받은 것으로 추정된다. 엽리의 자세로 예측되는 습곡구조를 따라 일부 새로운 광체가 확인되므로 현재 충적층으로 피복되어져 있는 자은리 남쪽 지표상에서 미확인된 광체들이 중부와 남부 광체 사이에 엽리방향과 경사를 고려하면 거꾸로 된 기억자(ㄱ) 형태로 잠두하고 있을 것으로 추정된다. 이 지역에서 구조적으로 해석된 광체의 추정연장선 파악은 광체 확보를 위한 시추 위치 선정과 매장량 산정에 중요한 역할을 할 것으로 판단된다.

상동중석광상(上東重石鑛床)의 현미경적(顯微鏡的) 연구(硏究) (Microscopic Study of Sangdong Tungsten Ore Deposit, Korea)

  • 이대성;김서운
    • 자원환경지질
    • /
    • 제2권1호
    • /
    • pp.1-12
    • /
    • 1969
  • In the Sangdong Mine area, Taebaegsan series (Pre-Cambrian) and Chosun System (Cambro-ordovician) are widely distributed. The Chosun System consists of Yangdug Series (Jangsan Quartzite and Myobong Slate) and The Great Limestone Series (Pungchon Limestone, Shesong Shale, Hwajeol Formation and Dongjeom Quartzite). The mineralized zone containing the main ore body of the Sangdong Mine was developed in the Myobong Slate formation. The result of the field and microscopic study on the mineral paragenesis and it's wall rock alteration in the tungsten ore deposit shows the following features. The orogenic movements of the Post-Chosun System in the Hambaeg Geosyncline are closely related to the tungsten ore deposition in the area, the ore minerals are composed mainly of scheelite, powelite molybdenite and sulfide minerals, and gangue minerals are hornblende, diopside, garnet, quartz, phlogopite, tremolite, biotite, muscovite, fluorite, etc., main ore body was enriched by scheelite bearing quartz vein filling into interstices of formerly mineralized zones, and the minor faults, faults of N $60^{\circ}-70^{\circ}W$, $45^{\circ}-60^{\circ}NE$ and joints, which were formed at the end of the mineralization and the slate. Country rock of the ore body was altered into the following several zones from the outside to the inside; lowgrade recrystalline aureole, silicified sericite zone, and diopside-hornblende zone. Under the microscopic observation of 195 samples taken from throughout ore body can be classified into 10 different groups by their mineral paragenesis as shown in table 2. The garnet-diopside group is primary skarn and it shows gradational change to the groups of later stage by the successive processes of metasomatism. From the stage of quartz-bearing group, the dissemination of scheelite is seen. The crystallization of scheelite in the bed started with the quartz deposition and continued to the last stage when quartz vein intruded into the main ore body. In the field and the under ground investigation a durable limestone bed in thickeness about 20 meters and their remnants in ore body are observed and under microscope calcite remnants are recognized. Hence it is posturated that the ore material moved up through the faults, shear zones or feather cracks and was assimilated with the interbeded limestone, after that the body was affected by the successive differentiated ore solution by gradational increasing in $SiO_2$, $K_2O$ and $H_2O$. Evidently this ore deposit shows the features resulted from pyrometasomatic processes.

  • PDF

포천광산(抱川鑛山)의 지질광상(地質鑛床) (Geology and Ore Deposit of Pocheon Iron Mine)

  • 칸다 요무
    • 자원환경지질
    • /
    • 제2권2호
    • /
    • pp.53-67
    • /
    • 1969
  • Magnetite deposit of Pocheon Iron Mine is a contact replacement skarn deposit embedded in the carbonate rocks (limestone and dolomite) which are intruded by granite porphyry. The shape of ore bodies is sweet potato-like and/or irregular massive form; D-ore body, the biggest one is of $180m{\times}40m{\times}200m$ in size. The ore is in general of high grade. The location of the ore bodies is controlled by the fault which strikes north south and dips $60^{\circ}$ to $70^{\circ}$ to the west. A regular distribution of mineralized zones is recognized in order of outward (hanging wall side) from granite porphyry as follows: compact fine-grained skarn, limesilicates, magnetite ore body, marble, limesilicates, pyritized meta-sediments.

  • PDF

철광산의 광체 평가를 위한 지구통계학적 복합 모델링 (Geostatistical Approach to Integrated Modeling of Iron Mine for Evaluation of Ore Body)

  • 안태규;오석훈;김기연;서백수
    • 지구물리와물리탐사
    • /
    • 제15권4호
    • /
    • pp.177-189
    • /
    • 2012
  • 복합 물리탐사(전기비저항, MT)와 지질(시추 자료 및 코어 물성)정보에 대해 지구통계학적 복합해석 기법을 적용하여 3차원 광체 모델링 평가를 수행하였다. 우선, 복합 물리탐사를 통해 시추공 및 그 외의 전체적인 지역에 대한 비저항대 분포를 파악할 수 있었으며, 코어 물성 시험을 통해 연구지역의 자철석(광체)이 코어 내부의 밀도가 높은 전도성 성분(Fe)에 의해 밀도의 증가에 따라 비저항이 감소하는 상관관계를 나타냄을 파악하였다. 3차원 광체 모델링을 수행하기 위해 사용된 자료는 전기비저항 탐사, MT 탐사, 물성 자료와 시추 자료 등이며, 전체 획득 자료 및 시추 자료에서 추출한 광체의 품위 자료를 이용하였다. 본 연구에서는 자료의 복합 해석을 위해 지구통계학적 기법 중에서, 부족한 실제 측정 자료의 평균 및 분산을 잘 재생시키는 실현 값을 통해 지역적으로 변화하는 불균질성을 잘 묘사하는 순차 가우시안 시뮬레이션(sequential Gaussian simulation)을 사용하였다. 획득된 전체 자료와 품위 자료만을 이용하여 도출한 시뮬레이션 결과, 광체가 기존에 연구되어 존재하는 잔광체의 일정 부분에서 유사한 분포를 나타냈으며, 추가적으로 하부 깊은 심도에 대해 광체의 분포 양상을 추정할 수 있었다.

Three-Point 전극(電極) 배열법(配列法)을 이용(利用)한 전기(電氣) 비저항탐사(比抵抗探査) 모형연구(模型硏究) (A Model Study for Electrical Resistivity Method Using Three-Point Electrode Array)

  • 민경덕;김종미
    • 자원환경지질
    • /
    • 제14권3호
    • /
    • pp.111-122
    • /
    • 1981
  • This study is a model analysis for an effective application of the geophysical prospecting to the investigation of geological structures or useful resources, and the purpose of it is to research a property of the electrical resistivity prospecting, especially by using a Three-Point electrode array method. In using the Three-Point electrode array method, it is theoretically assumed to choose the infinite for a distance between the two current electrodes, however it is impossible in applying to the practical field prospecting. Therefore this study was conducted for determination and presentation of a minimum appropriate distance between the two current electrodes by making a study on prospecting effect in the variation of distance between both the electrodes. In case that the ratios of the distance between the two current electrodes to that between the two potential electrodes are respectively chosen for 40, 400, 5,000, the experimental data of this study showed that the minimum appropriate distance between the two current electrodes is forty times as much as that between two potential electrodes. In order to make clear a problem about prospecting depth which is essential to the data processing, it had been chosen equally to the distance between two potential electrodes. As a result of it, it was shown that the anomaly is appeared along the position of an assumed ore body. Consequently it was found out that the prospecting depth of the Three-Point electrode array method is the same as the distance between the two potential electrodes. From the model experiment on the sheeting ore body(or linear structure) of horizontal, dipping of $30^{\circ}$, $60^{\circ}$ and vertical on the basis of above experimental condition, it was found out that the position and dip of assumed ore body could be inferred from the aspects of the equiresistivity curve. In consequence of performing out the simultaneous Normal and Reversal electrode movement, it was shown that the electrode movement of the Reversal forms the anomaly more clearly than that of Normal when the sheeting ore body is situated obliquely, therefore it could be ascertained that the electrode movement have to be performed simultaneously in the manner of Normal and Reversal. It was also exhibited that the aspect of the equiresistivity curve forms symmetrically when an assumed ore body (or linear structure) is situated horizontally or vertically, that is, symmetrically, and moreover that the aspect of the equiresistivity curve forms unsymmetrically when an assumed ore body (or linear structure) is situated obliquely. On the basis of these experimental analysis it is thought that it can be inferred from the aspect of equiresistivity curve whether an assumed ore body is obliquely situated or not.

  • PDF

맥상 황화광체에 대한 전기 및 전자탐사 반응 (Electrical and VLF EM Responses for Conductive Dipping Dyke)

  • 유인걸
    • 지구물리와물리탐사
    • /
    • 제1권2호
    • /
    • pp.110-115
    • /
    • 1998
  • 전도성 황화광체의 탐사에는 현장작업의 편이성과 저렴한 조사 경비 및 성과의 신뢰성으로 자연전위탐사, VLF 전자탐사 및 전기비저항 쌍극자탐사법이 많이 사용되어 왔다. 금번 탐사는 전라북도 진안군 부귀면에 소재 하는 장금 광산의 맥상의 노두 광체를 대상으로 맥상 황화광체에 대한 물리탐사 탐사 반응을 검토하고 이를 시추탐사 결과와 대비, 고찰하여 보았다. 조사지역 부근의 지질은 유천층군의 퇴적 암류와 산성 화산암류로 구성되며 광상은 광염상 또는 맥상으로 황철석, 자류철석 및 방연석 등의 황화광물이 배태된다. 이들 맥상 광체에 의한 전형적인 이상대가 각각 포착되었는데, 자연전위탐사 결과 광체는 등전위선 분포가 조밀하고 전위 경도가 큰 쪽으로 경사지며, VLF 전자탐사 결과 광체의 부존 범위와 잘 일치되며 서쪽으로 경사지는 광체에 의한 반응임이 확인되었다. 쌍극자 전기비저항탐사 결과 역시 서쪽으로 경사지는 광체에 의한 반응이 확인되었다. 이에 대한 시추탐사 결과 광체는 주향 방향으로 약 50 m 연장되며 약 $70^{\circ}W$경사를 가진 맥상 광체임이 밝혀졌다.

  • PDF

홍천-자은지역 철-희토류광상의 광화작용 (Fe-REE Mineralization of the Hongcheon-Jaeun District)

  • 김상중;이현구;윤경무;박중권
    • 자원환경지질
    • /
    • 제34권4호
    • /
    • pp.319-328
    • /
    • 2001
  • 연구지역의 철-희토류광상은 선캄브리아기의 편마암류내에 맥상으로 배태되어 있으며, 크게 두 개의 광체, 즉 자은광체(북부광체)와 홍천광체(남부광체)로 나뉜다. 광상에서 산출되는 경제적인 광물로는 자철석, 모나자이트, 스트론티아나이트 및 중정석이다. 산출광물의 공생관계 및 조직을 근거로 본다면, 광화작용은 카보나타이트의 분화작용과 관련되어 Na-카보나타이트 단계와 Fe-카보나타이트 단계로 나눌 수 있다. 주된 희토류광물은 Fe-카보나타이트 시기 동안에 침전되었다. 이처럼 철-희유광물이 카보나타이트와 관련되어 침전되었다고 고찰하는 증거로는 1) 스트론티아나이트와 모나자이트가 용리조직을 갖으며 산출되는 점, 2) 스토론티아나이트와 중정석이 용리조직을 갖는점, 3) 희토류광물이 주로 산출되는 지역에서 화성기원의 액마이트가 산출되는 점, 4) 탄산염광물-자철석-희토류광물의 공생 및 공존관계 등으로 볼 때 이 지역의 철-희토류광화작용은 화성기원의 카보나타이트에서 기원되었음을 암시하고 있다.

  • PDF

스마트마이닝을 위한 정밀 광산공간정보 구축 및 광체 모델링 (Construction of Precise Mine Geospatial Information and Ore Modeling for Smart Mining)

  • 박준규;정갑용
    • 한국측량학회지
    • /
    • 제38권6호
    • /
    • pp.725-731
    • /
    • 2020
  • 광물자원 개발에서 자원탐사는 지표와 지하에 있는 경제성 있는 광물을 찾아내는 작업으로 개발, 생산단계에 비해 성공률이 낮은 실정이며, 탐사를 통해 많은 자료를 수집하고 수집된 정보를 정확하게 분석하는 것이 필요하다. 본 연구에서는 3D 레이저스캐너를 이용하여 광산공간정보를 구축하고, 정확도 평가를 수행하여 X, Y 및 Z 방향으로 최대 0.140m와 평균 0.095m의 편차를 얻어 3D 레이저스캐너를 통한 광산공간정보 구축의 활용 가능성을 제시할 수 있었다. 또한 자원탐사 결과를 이용해 광체구간에 보간법을 적용하여 광체 모델링을 수행하였다. 광체 모델링 결과는 3D 레이저스캐너를 통해 구축된 광산공간정보의 모델링 결과와 중첩하여 정밀 광산공간정보 기반의 광체 모델링 결과를 구축할 수 있었다. 연구를 통해 구축된 광산공간정보 기반의 광체 모델링 결과는 자료해석의 용이성과 산출자료의 정확도를 높일 수 있어 향후 광물자원 개발과 광해방지 분야 관련 업무의 효율성을 크게 증가시킬 것이다.

3차원 모델링을 이용한 재개광 양양철광의 운반시스템 설계 (Mine Haulage System Design for Reopening of Yangyang Iron Mine using 3D Modelling)

  • 손영진;김재동
    • 터널과지하공간
    • /
    • 제22권6호
    • /
    • pp.412-428
    • /
    • 2012
  • 본 연구에서는 재개광을 계획하고 있는 (구)양양철광의 수갱광체를 연구대상으로 설정하고 이를 재개광하기 위한 운반시스템의 구축을 목적으로 광체 및 광체 주변의 지질구조와 구갱도 현황 및 신갱도 개설 계획을 3차원으로 모델링 하였다. 연구에 사용된 software는 GEMCOM사(社)의 GEMS로써 3차원의 매장량평가, 개발타당성 평가, 운영 관리용 프로그램이다. 2차원 지형도와 지표 지질도를 자료로 하여 지표 지형 및 지질을 3차원으로 모델링 하였으며 (구)양양철광 개발 당시 작성된 지질 단면도와 시추자료를 토대로 연구대상지역의 지질 구조 및 광체를 3차원적으로 생성하였다. 수갱광체는 충전된 채굴적, 공동, 잔광으로 구분하여 모델링하고 잔광부의 품위에 대한 시추 정보로부터 지구통계학적 기법을 적용하여 품위별 매장량 평가 결과를 얻을 수 있었다. 또한 기존 2차원 구갱도 개설 현황 자료를 이용하여 구갱도에 대한 3차원 모델링을 수행하였고, 무궤도 운반 시스템의 적용을 고려하여 신갱도의 크기와 배치를 3차원으로 설계하였다. 완성된 광체 및 운반 시스템의 3차원 모델을 이용하여 지하선광장의 위치를 선정하였다. 마지막으로 채취한 시료의 암석 물성값들을 기초로 광체 주위에 부존하는 물성을 암종별로 입력하고 지구통계학적 기법을 통해 미조사 부분에 대한 암석물성을 추정할 수 있는 3차원 공학적 모델링을 수행하였다. 이러한 과정을 통하여 얻어진 재개광 광산의 3차원 모델은 매장량 평가 및 개발계획 수립, 추가 탐사 지역의 선정이나 개발 계획의 변경 등의 문제들을 해결하고 체계적이고도 지속적인 광산 개발 기술 확립에 기여할 수 있을 것이다.

광물(鑛物)의 특징적(特徵的) 분포(分布)에 의(依)한 상동광상(上東鑛床)의 성인(成因) 추정(推定) (Discussion on the Origin of the Sangdong Tungsten Mine based on its Mineral Assemblage)

  • 문건주;김태수
    • 자원환경지질
    • /
    • 제5권3호
    • /
    • pp.145-150
    • /
    • 1972
  • This report is written for presenting a principal theme of study about. the origin of Sangdong ore deposit in details, being an aid to find new ore bodies, on the basis of mineralogical charactor and geological feature. Main vein in Sandgong mine has characteristic zonal distribution and localization of minerals. 3 kinds of minerals, that are quartz, hornblende, diopside, form systematically their each rich zones. Other minerals like plagioclase, native bismuth, sphene, molybdenite and wolframite are developed locally. According to the zonal distribution and localization of the minerals, the authors presume that mineralizing agents which changed interbedded limestones into ore bodies act and come up from non-exposed igneous body in the direction perpendicular to the platy main vein. That non-exposed igneous body, presumed, might be extended from the exposed igneous bodies in the southern part of Sangdong mine.

  • PDF