• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.498-504
• /
• 2017

Oral health behavior such as toothbrushing one's teeth, using dentifrice and such are an important part of improving one's oral health and therefore quality of life. However, it is also necessary to research exposure to harmful chemical substances. Therefore, this study investigated the factors that affect researching fluorine exposure resulting from oral health behavior initiation so that correct oral health guidelines can be provided. As a result of applying the fluorine compound's oral exposure in the ConsExpo 5.0 model, adult males' oral external dose was at 0.000196 mg/kg, oral acute (internal) dose at 0.000196 mg/kg/day and oral chronic (internal) dose at 0.000465 mg/kg/day. In the case of females, the oral dose was at $4.1{\times}10^{-6}mg/kg$, oral acute (internal) dose at $4.1{\times}10^{-6}mg/kg$ and oral chronic (internal) dose at $9.99{\times}10^{-6}mg/kg/day$.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.324-333
• /
• 2023

Background: Human exposure to phthalates in indoor environments occurs via dermal absorption, oral ingestion of indoor dust, and inhalation of indoor air. However, systematic studies to investigate the exposure rate to phthalates among the three exposure routes in indoor environments are currently limited. Objectives: A theoretical exposure ratio between inhalation and oral exposure was calculated based on the total amount of di(2-ethyl-hexyl) phthalate (DEHP) emitted into indoor air and deposited into floor dust in a test house. Methods: Flooring and wallpaper containing DEHP were installed in a test house and the concentration of DEHP in both indoor air and floor dust were monitored for five months. Based on the measured DEHP concentrations, the theoretical total amount ratio of DEHP that could be exposed through inhalation and oral ingestion was calculated. Results: Considering the period of operation in the test house, the theoretical total amount of DEHP through inhalation and oral ingestion exposures in the entire test house space was calculated to be 0.014 mg and 5.5 mg, respectively. The exposure ratio of the two routes between inhalation and oral exposure corresponding to the total DEHP amount in flooring and wallpaper was 6.0×10^-7% and 2.3×10^-4%, indicating that theoretical oral exposure to DEHP is approximately 380 times higher than inhalation. Conclusions: Monitoring results from a test house has shown that oral exposure is the main exposure route for DEHP in indoor environments. The experimental design employed in this study and theoretical exposure ratio obtained can be applied to investigate actual exposure to DEHP and to determine the exposure characteristics of various types of semi-volatile organic compounds.

• International Journal of Oral Biology
• /
• v.34 no.4
• /
• pp.185-190
• /
• 2009

This study examined the effects of red light generated from a light emitting diode (LED) upon proliferation and mitochondrial stress in human gingival fibroblasts (hGFs). Cells were exposed to LED-generated red light at a clinically relevant intensity and distance with a 610-630 nm wavelength for various times (0-48 min). At different exposure times, cells were processed for the analysis of succinate dehydrogenase (SDH) activity, proliferation, mitochondrial membrane potential (MMP) and cytotoxicity. Cell cycle progression was also investigated by flow cytometry after staining with propidium iodide. Red light exposure was found to inhibit SDH activity and DNA synthesis in hGFs in a time-dependent manner. Light exposure also reduced the MMP levels in these cells and this was closely associated with a $G_0/G_1$ arrest. In contrast, exposure of hGFs to red light for 48 min led to a dramatic loss of MMP with an attendant increase in cytotoxicity. These findings demonstrate that LED-generated red light may cause mitochondrial stress and growth inhibition in hGFs during tooth whitening therapy, depending on the length of the exposure.

• Imaging Science in Dentistry
• /
• v.52 no.3
• /
• pp.283-288
• /
• 2022

Purpose: This study was conducted to measure the radiation exposure and image quality of various cone-beam computed tomography (CBCT) machines under common clinical conditions and to analyze the correlation between them. Materials and Methods: Seven CBCT machines used frequently in clinical practice were selected. Because each machine has various sizes of fields of view (FOVs), 1 large FOV and 1 small FOV were selected for each machine. Radiation exposure was measured using a dose-area product (DAP) meter. The quality of the CBCT images was analyzed using 8 image quality parameters obtained using a dental volume tomography phantom. For statistical analysis, regression analysis using a generalized linear model was used. Results: Polymethyl-methacrylate (PMMA) noise and modulation transfer function (MTF) 10% showed statistically significant correlations with DAP values, presenting positive and negative correlations, respectively (P<0.05). Image quality parameters other than PMMA noise and MTF 10% did not demonstrate statistically significant correlations with DAP values. Conclusion: As radiation exposure and image quality are not proportionally related in clinically used equipment, it is necessary to evaluate and monitor radiation exposure and image quality separately.

• Journal of Korean Dental Science
• /
• v.14 no.2
• /
• pp.51-60
• /
• 2021

Purpose: Measuring viability of a three-dimensional in vitro organotypic human oral tissue model has been suggested as an alternative test method to the oral mucosa irritation test of oral care products. The aim of this study was to investigate the production of two different cytokines using organotypic human oral tissue model following exposure to chemicals that are commonly used in oral care products. Materials and Methods: The organotypic human oral tissues were exposed to ethanol, sodium lauryl sulphate or hydrogen peroxide for 90 minutes. Following exposure, interleukin (IL)-1α and IL-8 productions were assessed and correlated with cell viability testing as well as histology of the organotypic human oral tissues. Result: High levels of IL-8 were released from organotypic human oral tissues in all of the test and control groups without any significant differences between them. In contrast, differences were found in IL-1α release between the test and control groups. Additionally, the trend of IL-1α release corresponded to the phenotypes observed in histological analysis while different trend existed between IL-1α release and cell viability. Conclusion: The study concluded the non-specific release of IL-8 for the assessment of oral care product chemicals' toxicity, while potential of measuring IL-1α cytokine level as the possible alternative test method.

• Imaging Science in Dentistry
• /
• v.32 no.2
• /
• pp.75-79
• /
• 2002

Purpose : To evaluate the effect of exposure time and image resolution on fractal dimension calculations for determining the optimal range of these two variances. Materials and Methods : Thirty-one radiographs of the mandibular angle area of sixteen human dry mandibles were taken at different exposure times (0.01, 0.08, 0.16, 0.25, 0.40, 0.64, and 0.80 s). Each radiograph was digitized at 1200 dpi, 8 bit, 256 gray level using a film scanner. We selected an Region of Interest (ROI) that corresponded to the same region as in each radiograph, but the resolution of ROI was degraded to 1000, 800, 600, 500, 400, 300, 200, and 100 dpi. The fractal dimension was calculated by using the tile-counting method for each image, and the calculated values were then compared statistically. Results: As the exposure time and the image resolution increased, the mean value of the fractal dimension decreased, except the case where exposure time was set at 0.01 seconds (α = 0.05). The exposure time and image resolution affected the fractal dimension by interaction (p<0.001). When the exposure time was set to either 0.64 seconds or 0.80 seconds, the resulting fractal dimensions were lower, irrespective of image resolution, than at shorter exposure times (α = 0.05). The optimal range for exposure time and resolution was determined to be 0.08- 0.40 seconds and from 400-1000 dpi, respectively. Conclusion : Adequate exposure time and image resolution is essential for acquiring the fractal dimension using tile-counting method for evaluation of the mandible.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.2
• /
• pp.293-303
• /
• 1992

Generally the patient's absorb dose and readability of radiograms are affected by the exposure time and kVp of which are related with the radiographic density and contrast The investigator carried studies to know the adequate level of exposure time and kVp to obtain the better readability of radiograms. In these studies dried human mandible with selfcuring acrylic resins attached with aluminum step wedge was used and readability of radiograms were compared with each other by videodensitometry among various combination sets of the exposure time, such as 5, 6, 8, 12, 15, 19, 24, 30, 38, 48 and 60, and varing level of kVp, such as 60, 65, 70, 80 and 90 respectively. The obtained results were as follows: 1. As exposure time and kVp were increased, radiographic density of radiograms was increased. 2. The subject contrast was increased where aluminum step wedge was thin and reduced in the reversed condition. At the thin aluminum step wedge, subject contrast was increased at the condition of lower kilovoltage than that of higher kilovoltage. 3. In the case of non-constant radiographic density, the radiographic contrast was reduced with the increment kilovoltage. The radiographic contrast was increased in the lower kilovoltage with the longer exposure time and the higher kilovoltage with the shorter exposure time. 4. At the condition of short exposure time, better readability of each reading item was obtained with the increment of the kilovoltage but at the opposite condition increasing exposure time worsened readability of radiograms. Since X-ray machine in the current dental clinics is fixed between the range of 60-70kVp and 10mA, good radiograms can be obtained by varied exposure time. But according to the conclusion of these studies, better radiograms can be obtained by using filtered high kVp and then the absorb dose to patient and exposure time can be reduced.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2015

The most critical health effect of lead exposure is the neurodevelopmental effect to children caused by the increased blood lead level. Therefore, the endpoint of the risk assessment for lead-contaminated sites should be set at the blood lead level of children. In foreign countries, the risk assessment for lead-contaminated sites is conducted by estimating the increased blood lead level of children via oral intake and/or inhalation (United States Environmental Protection Agency, USEPA), or by comparing the estimated oral dose to the threshold oral dose of lead, which is derived from the permissible blood lead level of children (Dutch National Institute for Public Health and the Environment, RIVM). For the risk assessment, USEPA employs Integrated-Exposure-Uptake-Biokinetic (IEUBK) Model to check whether the estimated portion of children whose blood lead level exceeds 10 µg/dL, threshold blood lead level determined by USEPA, is higher than 5%, while Dutch RIVM compares the estimated oral dose of lead to the threshold oral dose (2.8 µg/kg-day), which is derived from the permissible blood lead level of children. In Korea, like The Netherlands, risk assessment for lead-contaminated sites is conducted by comparing the estimated oral dose to the threshold oral dose; however, because the threshold oral dose listed in Korean risk assessment guidance is an unidentified value, it is recommended to revise the existing threshold oral dose described in Korean risk assessment guidance. And, if significant lead exposure via inhalation is suspected, it is useful to employ IEUBK Model to derive the risk posed via multimedia exposure (i.e., both oral ingestion and inhalation).

• Imaging Science in Dentistry
• /
• v.47 no.3
• /
• pp.189-197
• /
• 2017

Purpose: To quantify artifacts from different root filling materials in cone-beam computed tomography (CBCT) images acquired using different exposure parameters. Materials and Methods: Fifteen single-rooted teeth were scanned using 8 different exposure protocols with 3 different filling materials and once without filling material as a control group. Artifact quantification was performed by a trained observer who made measurements in the central axial slice of all acquired images in a fixed region of interest using ImageJ. Hyperdense artifacts, hypodense artifacts, and the remaining tooth area were identified, and the percentages of hyperdense and hypodense artifacts, remaining tooth area, and tooth area affected by the artifacts were calculated. Artifacts were analyzed qualitatively by 2 observers using the following scores: absence (0), moderate presence (1), and high presence (2) for hypodense halos, hypodense lines, and hyperdense lines. Two-way ANOVA and the post-hoc Tukey test were used for quantitative and qualitative artifact analysis. The Dunnet test was also used for qualitative analysis. The significance level was set at P<.05. Results: There were no significant interactions among the exposure parameters in the quantitative or qualitative analysis. Significant differences were observed among the studied filling materials in all quantitative analyses. In the qualitative analyses, all materials differed from the control group in terms of hypodense and hyperdense lines (P<.05). Fiberglass posts did not differ statistically from the control group in terms of hypodense halos(P>.05). Conclusion: Different exposure parameters did not affect the objective or subjective observations of artifacts in CBCT images; however, the filling materials used in endodontic restorations did affect both types of assessments.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.280-285
• /
• 2002

As the result of the study concerning "bone inducibility of chitosan", 1. "BMP-2" was observed mainly through the test when the "osteoblast" is exposed to the "chitosan". The expression of BMP-2 was 542.63 times compared to control after 2 hours exposure and it was maintained 16.60 times till 24 hours. 2. The expression of BMP-4 was decreased compared to control during exposure. 3. The expression of BMP-7 revealed two peaks during exposure. 4. The expression of osteocalcin was increased in early phase, and then decreased. Although it is not clear whether the "chitosan" is clinically effective material as a "bone induction material", we could say that it has a function for bone induction. Further detailed study will be required.