• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.364-367
• /
• 1999

Swordbean was recently introduced to Korea, and cultural technique for stable production, e.g. optimum seeding date and planting space, has not been established. This experiment was conducted to elucidate the changes of growth characteristics, yield components, and yield as affected by different seeding dates and planting spaces. Days to flowering was shortened by 4∼28 days as seeding was delayed. Stem diameter, number of pods per plant, number of seeds per plant, 100-seed weight, and seed yield tended to increase with delaying seeding up to 5 April and then to decrease with further delaying seeding. These results indicate that optimum seeding date of swordbean in unheated polyvinyl house would be early April. Although, the swordbean exhibited large increases in plant height, number of branches per plant, and stem diameter at the wider spacings, planting space could be decreased to the 60 cm plant-spacing and 30 cm row-spacing with no deleterious effect on yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.93-96
• /
• 2000

The present study was performed to obtain the basic information about growth and quality related characteristics and optimum harvesting time for podedible pea which is a new crop in Korea but believed to have a great deal of potentials for both domestic and overseas markets. They can be consumed either as a fresh succulent vegetable or as tender green pods. The daily green pod yield of pod-edible peas started to increase from ten days after flowering and the maximum yield was recorded on 26 days after flowering. Ninety percent of pod yields could be harvested from 16 to 36 days after flowering. Mean green pod yield for the tested varieties was approximately 8.0 t/ha. Total vitamin C content of pod-edible peas showed continuously decreasing trends from five days after flowering. The highest sucrose content was obtained at ten days after flowering. The highest panel score based on sweetness, chewiness, and hardness for the processed green pods was shown at 10-15 days after flowering in all varieties tested, indicating that the optimum harvesting time for pod-edible peas was considered to be 10-15 days after flowering.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.71-76
• /
• 2006

Environment friendly agriculture is nowadays a major fiend to sustain balanced agricultural ecosystem, keeping its productivity. This study was conducted to determine the optimum levels of nitrogen (N) application for improving rice productivity and reducing N loss through N application based on soil diagnosis. four levels of N were applied with 0, 50, 100 and 150% of recommended levels by soil testing in 4 different paddy soils (i.e. normal, sandy, ill-drained and immature soils). Across N treatments, the greatest grain yield was observed in sandy soil and the lowest in ill-drained soil. The grain yield tended to decrease with increasing N application from 50% to 150% of recommended levels, except ill-drained soil. To ensure maximum yield the optimum levels of N application were estimated at 120 kg, 153 kg and 173 kg $ha^{-1}$ in normal, immature and sandy soil, respectively.

• Journal of Korean Society of Transportation
• /
• v.1 no.1
• /
• pp.56-63
• /
• 1983

Intersection control has dual-purposes; increasing capacity and reducing delay. The primary concern of efficient intersection control under oversaturated condition as in Korea is to increase capacity. Prevailing intersection operation technique permits thru traffic to utilize left turn lane, because the intersection without left turn pocket has left turn signal interval. In this situation, it seems not to be valid to calculate capacity, delay, and signal timings by conventional methods. By critical lane technique, capacity increases as cycle length increases. However, when thru traffic utilize LT lane, the capacity varies according to LT volume, LT interval as well as cycle length, which implies that specific cycle length and LT interval exist to maximize capacity for given LT volume. The study is designed is designed to calculate utilization factors of LT lane for thru traffic and capacities, and identify signal timings to yield maximum capacity. The experimental design involved has 3 variables; 1)LT volumes at each approach(20-300 vph), 2)cycle lengths (60-220 sec), and 3)LT intervals(2.6-42 sec) for one scenario of isolated intersection crossing two 6-lanes streets. For LT volume of 50-150 vph, capacity calculated by using the utilization factor is about 25% higher than that by critical lane method. The range of optimum cycle length to yield maximum capapcity for LT volume less than 120 vph is 140-180 sec, and increases as LT volume increases. The optimum LT interval to yield maximum capacity is longer than the intrval necessary to accommodate LT volume at saturation flow rate.

• Plant Resources
• /
• v.6 no.2
• /
• pp.102-107
• /
• 2003

To find out the optimum fertilizer level for high yielding variety, Velox, experiment was conducted with 15 compositions of fertilizer levels at the experiment field of forage crop in Sunchon National University from Mar. 2000 to Aug. 2000. The effects of nitrogen fertilizer on plant growth were significant but increasing rate of application in potassium and phosphate fertilizers above 6 kg/a had negligible effects on plant growth. The optimum nitrogen application level of fertilizers turned out to be 16-6-6 kg/l0a of N-P$_2$O$_{5}$-K$_{5}$O. Content of crude protein was highest and that of crude fiber such as NDF, ADF, cellulose and lignin were lowest at this rate of fertilizer application. Furthermore, IVDMD was high and dry matter yield were highest at the optimum raterate

• International journal of steel structures
• /
• v.18 no.4
• /
• pp.1107-1124
• /
• 2018

The structural behavior of reinforced concrete coupled shear wall structures is greatly influenced by the behavior of their coupling beams. This paper presents a process of the seismic analysis of reinforced concrete coupled shear wall-frame system linked by hysteretic dampers at each floor. The hysteretic dampers are located at the middle portion of the linked beams which most of the inelastic damage would be concentrated. This study concerned particularly with wall-frame structures that do not twist. The proposed method, which is based on the energy equilibrium method, offers an important design method by the result of increasing energy dissipation capacity and reducing damage to the wall's base. The optimum distribution of yield shear force coefficients is to evenly distribute the damage at dampers over the structural height based on the cumulative plastic deformation ratio of the dissipation device. Nonlinear dynamic analysis indicates that, with a proper set of damping parameters, the wall's dynamic responses can be well controlled. Finally, based on the total plastic strain energy and its trend through the height of the buildings, a prediction equation is suggested.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.3
• /
• pp.191-199
• /
• 2003

Optimum transplanting time for extremely early rice cultivation as an after-crop of fruit and vegetables under greenhouse conditions in the southern area was determined. Rice was transplanted on March 10, March 20, March 30, April 10 and April 20 far three years from 1998 to 2000. Meteorological computations for rice production were high for heading between early May and early July, but they were too low for heading between late July and early August. Especially the expected yield predicted with 35,000 spikelets, the average spikelets per $m^2$ for extremely early transplanting. Computation for heading between late July and early August was low by 106 kg/10a compared with that yield at heading during the same period in the field. As the transplanting date in extremely early rice cultivation was earlier) rice growth at early stages was more retarded by low temperature. Rice growth at heading stage recovered with high temperature, showing less difference for the transplanting date. Abnormal tillers occurred by 15.5∼22.2%. The contribution of 1,000 grain weight${\times}$ripened grain ratio to yield of the extremely early rice cultivation in the greenhouse was 50.6%, indicating 16% hi일or than the degree of panicle per $m^2$ on yield. The estimated optimum transplanting time on the basis of yield for the extremely early greenhouse rice cultivation ranged from March 19 to April 28, and the estimated critical transplanting date on the basis of accumulated effective temperature was March 12. Rice reduced the amount of NO$_3$-N by 97.1% and EC by 90.5% in greenhouse soil with continuous fruit/vegetables fer more than a 10-year period, and completely removed the root-knot nematodes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.224-232
• /
• 2019

Objective: Apart from various climatic differences, corn harvest stage and varieties are two major factors that can influence the yield and quality of corn silage in the tropics. A study was conducted to determine the optimum harvest stage of four corn varieties for silage production in Malaysia. Methods: Corn was harvested at four growth stages; silking, milk, dough, and dent stages from four varieties; Sweet Corn hybrid 926, Suwan, breeding test line (BTL) 1 and BTL 2. Using a split plot design, the treatments were then analysed based on the plant growth performance, yield, nutritive and feeding values followed by a financial feasibility study for potential commercialization. Results: Significant differences and interactions were detected across the parameters suggesting varying responses among the varieties towards the harvest stages. Sweet Corn was best harvested early in the dough stage due to high dry matter (DM) yield, digestible nutrient, and energy content with low fibre portion. Suwan was recommended to be harvested at the dent stage when it gave the highest DM yield with optimum digestible nutrient and energy content with low acid detergent fibre. BTL 1 and BTL 2 varieties can either be harvested at dough or dent stages as the crude protein, crude fibre, DM yield, DM content, digestible nutrient and energy were not significantly different at either stage. Further financial analysis showed that only Sweet Corn production was not financially feasible while Suwan had the best financial appraisal values among the grain varieties. Conclusion: In conclusion, only the grain varieties tested had the potential for silage making according to their optimum harvest stage but Suwan is highly recommended for commercialization as it was the most profitable.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.305-309
• /
• 2006

This paper presents and illustrates the application of a growth and yield model that supports both forest and mill side volume and value estimates. Traditional forest stand growth and yield models represent the forest landowner view of yield and economics. Predicted yields are estimates of what one would expect from a procurement cruise, and current stumpage prices are applied to investigate optimum management strategies. Optimum management regimes and rotation ages obtained from the forest side view are unlikely to be economically optimal when viewed from the mill side. The actual distribution of recoverable manufactured product and its value are highly dependent on mill technologies and configurations. Overcoming this limitation of growth and yield computer models necessitates the ability to predict and price the expected manufactured distribution of lumber, lineal meters of veneer, and tonnes of air dried pulp fiber yield. With these embedded models, users of the yield simulator can evaluate the economics of possible/feasible management regimes from both the forest and mill business sides. The simulator is a forest side model that has been modified to produce estimates of manufactured product yields by embedding models for 1) pulpwood chip size class distribution and pulp yield for any kappa number (Schultz and Matney, 2002), 2) a lumber yield and pricing model based on the Best Opening Face model developed by the USDA Forest Service Forest Products Laboratory (Lewis, 1985a and Lewis, 1985b), and 3) a lineal meter veneer model derived from peeler block tests. While the model is strictly applicable to planted loblolly pine (Pinus taeda L.) on cutover site-prepared land in the United States (US) Gulf South, the model and computer program are adaptable to any region and forest type.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.1
• /
• pp.56-62
• /
• 1994

A yeast strain, BT001, which can directly ferment D-xylose to ethanol was isolated from forest soils, and then identified as Candida sp. Cultural conditions for the optimum ethanol production, along with the effects of aeration on cell growth and ethanol production were investigated. Aeration stimulated the cell growth and the volumetric rate of ethanol production, but decreased the ethanol yield. Optimum temperature and initial pH for the ethanol production were $33{\circ}^C$ and 6.0, respectively. In a shake flask culture, this strain produced 52.3 g ethanol per liter from 12%(w/v) D-xylose after incubation for 96 hours. Ethanol yield was 0.436 g per g D-xylose consumed. This corresponds to 85.8% of theoretical yield. Also, this yeast strain produced ethanol from D-galactose, D-glucose and D-mannose, but not from L-arabinose and L-rhamnose. Among these sugars, D-glucose was the fastest in being converted to ethanol sugars.