• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.565-571
• /
• 2007

This study was carried out to investigate an optimum condition for the high angiotensin-l converting enzyme (ACE) inhibitory activity and the yield on enzyme concentration, casein concentration, and hydrolysis time. The optimum condition was performed by response surface methodology for acquirement of casein hydrolysate of milk which shows high ACE inhibitory activity, Among 8 tested enzymes, Protamex showed the highest activation degree with 77.03 unit/g from casein. Their hydrolysis degrees of flovourzyme 500MG, protamex, mixture from 1% casein were 85.5, 88.5, and 93.5%, respectively. The ranges of enzyme concentration (0.25-1.25%), casein concentration (2.5-12.5%), and hydrolysis time (20-100 min) as 3 independent variables through preliminary experiments of the yield of casein hydrolysate and ACE inhibitory activity, and it shows optimum response surface at a saddle point. It shows enzyme concentration (0.64%), casein concentration (8.38%), and hydrolysis time (55.81 min) in the yield aspect and showed the highest activity at enzyme concentration (0.86%), casein concentration (5.97%), and hydrolysis time (63.86 min) in ACE inhibitory aspect. The $R^2$ value of a fitted optimum formula on the hydrolysis yield was 0.9751 as the significant level of 1%. The $R^2$ value of a fitted optimum formula on ACE inhibitory activity is 0.8398, and the significance is recognized in the range of 5%.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.97-102
• /
• 2000

This experiment was conducted to investigate the changes of harvest index and the relationship between harvest index and yield determination factors by different planting times in the determinate soybean cultivars, Shinpaldal and Danbaeg. Optimum planting were 23 May in 1995 and 1996. Late planting were 13 June in 1995 and 6 June in 1996. Growth period from planting to physiological maturity (R7) was shortened as planting time was delayed in two cultivars due to shortening of reproductive growth period in Shinpaldal, and of vegetative growth period in Danbaeg. Stem weight was distinctly decreased in late planting compared to optimum planting, but seed weight of both cultivars was not different between planting times. Also, seed number per pod and harvest index were significantly increased in late planting and the high correlation was found between two factors. It was suggested that increase of harvest index in late planting would be related with high assimilate use efficiency due to increase of sink capacity. The results of correlation and principal component analysis for yield determination factors showed that main factor on yield determination was pod number per plant at R5 stage associated with dry matter accumulation during early reproductive growth period, seed number per pod and harvest index were the second factor, and one hundred seed weight was the third factor. The result of this experiment indicated that yield determination in soy-bean was dependent mainly on pod number per plant related to dry matter accumulation by early reproductive growth period, and the increase of seed number per pod and harvest index could compensate for yield decrease by shortening of vegetative growth period in late planting. Such result suggests that optimum planting date can be delayed from mid May to early June in improved soybean cultivars in Korea.

• Journal of Ginseng Research
• /
• 제15권1호
• /
• pp.31-35
• /
• 1991

In order to know the optimum planting density under shading structures at different light intensity, We investigated the growth status, distribution of ginseng leaf area, correlation between planting density and root weight per plant and yield, correlation between leaf area index and root weight per plant and yield. According to the increase of planting density the leaf area per plant was decreased, but leaf area index (L.A.I) was increased. Ginseng leaf population at different lines under common straw shading were distributed mainly in frost lines but polyethylene net shading at 10fo light intensity were distributed equally in all lines. Optimum planting density in common straw shading at 5% light intensity was 55 plant per tan (90 cmX180 cm) and polyethylene net shading 81 10% light intensity was 60 plant per tan, in consideration of root weight and yield. Optimum leaf area index was 2.4 under common straw shading at 5% light intensity but was 2.7 under polyethylene net shading at 10% light intensity.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.250-250
• /
• 2017

Studies were conducted to select the optimum sowing date and planting density of sesame in the middle area of Korea. To select the optimum sowing date, sesame seeds sowed from 20 April to 7 July with 15-day intervals. To select the optimum planting density, sesame seeds investigated under four different planting distances ($30{\times}10,\;30{\times}15,\;30{\times}20$, and $30{\times}25cm$)respectively in the experimental field. As seeding date was delayed, days to emergence were shortened flowering and maturing date were delayed. Delayed sowing date resulted in decreased length, capsule setting stem length and number of capsules, and branchs per plant. Number of Capsules was high sowing date on 5 May in the range of 90~95ea/plant in sesame. Also yield of sesame seeds was most high on 5 May in the range of 142kg/10a by sowing date. Sowing date up to 5 May showed no effect on grain yield, but from 5 June to 5 July decreased 27%, 68% and 86%, respectively. For all planting distances, weight of 1,000 grain was not significantly different. However, number of branches and capsules tended to increase. Number of Capsules was high planting distance of $30{\times}20cm$ and $30{\times}25cm$ in the range of 146.7~165.7ea/plant in the Geonbaekkae. Areumkkae also showed the same tendency on planting distance of $30{\times}20cm$ and $30{\times}25cm$ in the range of 122.0~147.5ea/plant, respectively. Yield of Geonbaekkae and Areumkkae seeds was most high 116kg/10a, 117kg/10a, respectively on planting distance $30{\times}20cm$. Decreased in the planting distance of sesame has increased the incidence of disease and lodging. Based on the results, we suggest a planting distance of $30{\times}20cm$ maximal growth and yield of sesame in the middle area of Korea. Considering growth characteristics, sesame yield ability, the optimum sowing date was 5 May and optimum planting pattern was founded to be two rows planting in one ridge and planting densities was $30{\times}20cm$.

• 약학회지
• /
• 제36권6호
• /
• pp.538-547
• /
• 1992

Optimal synthetic condition of barium sulfate were investigated from the viewpoint of yield and bulkiness according to a randomized complete block design proposed by G.E.P. Box and K.B. Wilson. Barium chloride and magnesium sulfate were utilized as reactants in order to prepare barium sulfate in this study. It was found that optimum temperature range of reactant solutions was $60{\sim}100^{\circ}C$ and the optimum concentration range of the reactant solutions was $10{\sim}17.3%$ and $10{\sim}20%$ respectively, on the viewpoint of yield and bulkiness. The optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum reacting time range was $15{\sim}20$ minutes. The optimum drying temperature range was $110{\sim}130^{\circ}C$ from the viewpoint of yield, but it was $90{\sim}110^{\circ}C$ on the basis of bulkiness. Apparent viscosity of barium sulfate suspensions dispersed in various concentrations of Na. CMC was measured by using Brookfield synchrolectric viscometer model LVT, the relative equation, log ${\eta}_{sp}=A+B.{\phi}$ was examined and the equation was found to agree fairly well. 1 w/v% Na. CMC aqueous solution and 0.1 volume fraction of $BaSO_4$ powder were optimum in the preparation of $BaSO_4$ suspension showing highest viscosity at infinite shearing.

• 한국자원식물학회지
• /
• 제2권2호
• /
• pp.252-258
• /
• 1989

This study was investigated to find out the optimum planting densities of Aptum graveolns L. about growth characters, yield components and yi-eld at 9 planting densities by transplanting cultureThe results obtained are summarized as follows ;1 . Studying the correlationship, the highly negative significances we-re found between planting densities and petiole weight , planting d-ensities and plant weight , respectively .2. Plant hight was longest in spacious planting, and was short in dense3 . Petiole yield was thinkest in planting densities(50$\times$35n), and wasthin in planting densities(40$\times$25n) .4. Yield of Petiole was increased in PLanting densities(50$\times$25cn) ,quality and yield of petiole were highest by optimum plantting densi-ties (50$\times$35cn ) .

• 한국세라믹학회지
• /
• 제30권6호
• /
• pp.478-484
• /
• 1993

The influence of reaction conditions on the MnZn ferrite coprecipitation process were investigated using mixed metla sulfate solution and ammonium oxalate. In order to minimize the metallic ion losses and to control the particle size, the optimum reaction conditions were as follows; reaction temperature $25^{\circ}C$, metal sulfate concentration 0.3M, molar ratio of ammonium oxalate/mixed metal sulfate 1.1:1. The production yield was as high as 97.6% of theoretical yield at optimum reaction condition.

• 한국초지조사료학회지
• /
• 제15권4호
• /
• pp.274-278
• /
• 1995

This experiment was conducted to know what does the cutting date have an effect on the chemical composition and nutritive yield of Miscanthus sinensis, in order to determine the optimum cutting date of the plant when it is utilized as roughage. Miscanthus sinensis growing natively in the summit of Sam Ak mountain(550m above sea level) was cut at 10 days intervals from 25 July to 15 October, 1988. Plant length and dry matter contents were generally increased with delayed cutting date. Crude protein contents of the plant cut on 5, 15, and 25 of September were 5.5, 5.2 and 5.1%, respectively. Cmde fiber contents was similar with cutting treatment and averaged 35.6%. Cmde protein yield was higher in September than in other cutting date. Yield of crude fiber were 8.3, 9.3 and 9.3t/ha on 5, 15 and 25 September, respectively. Ratio of Cmde protein yield to Crude fiber yield on 5 September tended to be higher than on 15 September and 25 September. These results suggest that the optimum cutting date of the Miscanthus sinensis for good quality forage seems early September.

• 한국작물학회지
• /
• 제32권3호
• /
• pp.287-293
• /
• 1987

호밀 적ㆍ만기 파종에서 종자성숙 및 파종량이 출아, 생육, 청예 건물수량 및 종실수량에 미치는 영향을 구명하고저 경북 경산군 영남대학교 농장에서 재래종(팔당호밀)을 공시하여 파종기 10월 28 일(적기) 및 11월 11일(만기)로 하고 파종기별로 출수후 45일 및 30일에 수확한 종자를 파종량을 달리하여 ( 1$m^2$당 300입, 450입, 600입, 750입, 900입) 시험을 실시하였다. 출아수 및 분얼수는 적기파종에서 출수후 30일과 45일 종자간에 차이가 없었고, 파종량을 증가할 때 출아수가 증가하고 분얼수는 감소하는 경향이 있었고, 만기파종에서는 출수후 45일 종자에서 30일 종자보다 출아수와 분얼수가 많았으며 파종량 증가에 따른 차이는 인정되지 않았다. 만파에서 출수후 30일 종자는 파종량 증가로서 적정주수 확보가 어렵다. 출수기는 적ㆍ만파에서 출수후 30일 종자가 2~3 일 늦었다. 청예수양은 만파에서 크게 감소하였고 적ㆍ만파모두 파종량을 높일 때 청예수량도 증대되어 적기파종에서 750립 / $m^2$( 15kg/ 10a)의 파종량에서 최대가 되었고, 출수후 30일 종자는 만파에서 현저하게 낮았다. 수수 및 1000입중은 적기파종에서 만기파종보다, 그리고 만기파종에서는 출수후 45일 종자로서 파종량 750립/$m^2$ ( 15kg/10a) 이상에서는 적기파종의 종실수량 수준까지 접근할 수 있었다. 출수후 30일 종자는 만기파종에서 파종량을 증가하여도 출아율이 낮고 청예 및 종실수량이 심하게 감소되어 종자로 이용하기는 불안정하다.

• The Korean Journal of Ecology
• /
• 제13권3호
• /
• pp.191-202
• /
• 1990

For the maximun yield of the forest trees in the forest management, the growth of annual ring area of the major forest trees was analysed in the four areas in South Korea. The time to the maximum productivity and the optimum cutting time for the maximum yield were estimated. The growth curve of annual ring area showed sigmoid like that of other organisms. Only the growth coefficient among the areas between Fraxinus rhynchophylla and Pinus koraiensis represented significance (5% level). The growth coefficient among forest trees between Pinus densiflora and Abies holophylla, Larix kaempferi and Carpinus laxiflora, Larix kaempferi and Quercus mongolica, Larix kaempferi and Quercus serrata, Larix kaempferi and Pinus koraiensis, and Larix kaempferi and Abies holophylla represented significance (5% level). Among eight forest trees, the time to maximum productivity (tm) of Larix kaempferi was the earliest (21.4 year), and Abies holophylla was the latest (91.9 year). The optimum cutting time for the maximum yield (tc) of L. kaempferi was the earliest (29.4 year) and that of A, holophylla was the latest (122.2 year) of all communities. The optimum cutting time for the maximum yield was 1.33 times as late as the time to the maximum productivity. If the growth of annual ring area as the forest tree for wood is regarded, L. kaempferi and P. densiflora are thought to be more economical than A. holophylla and P. koraiensis.