• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.202-209
• /
• 2015

Many of the natural dyes used for natural dyeing are difficult to maintain colorfastness due to their complex structure and specific properties. Therefore, there is a need for developing of color sustainable ability for use as an advanced coloring agent for fabrics, which would eco benign or not. In this study, the natural dye extracted from the waste of grape fruits was used to dye cotton fabric. Thus, the present study aims at extraction of color from grape seeds, skin, and stem through fermentation and then employing the same in dyeing and mordanting of cotton. Dyeing experiments were done under different conditions of fermentation and protein type mordants which were treated before and after dyeing. Experimental fabrics were used with cotton after scouring. Color value of dyed fabrics and color fastness of cotton dyed fabrics to washing and light were measured. The fastness of dyed experimental fabrics was increased by mordanting of protein fermentation and the color of dyed cotton was light red purple. The color of dyed fabric found with the optimum mordant treatment when treated with pre milk-mordant at $40^{\circ}C$ for 30min and 3% grape seed extract. On the whole, reddish tone very slightly increased with the milk pre-mordant. The color fastness of dyed cotton fabrics to light and washing was increased after fermentation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권1호
• /
• pp.58-64
• /
• 2005

본 연구는 플럭 형성 비소 오염토양에 대한 토양세척기법 적용시 최적의 운전조건을 도출하고자 하였으며, 대상 시료는 D 폐철광산 토양을 선정하였다. 최적의 cut-off size는 전체 토양 중량에 대하여 약 $94\%$ 정도의 분포를 보이는 0.15 mm ($\#100$체)이었다. 수산화나트륨과 염산 모두 비소 제거에 효과적이었고, 진탕비 (토양[g]:세척용액[mL])는 2가지 세척제에 대하여 1:5가 최적 조건임을 알 수 있었다. 토양세척시 형성되는 플럭에 대하여 비소 농도를 파악한 결과, 여타 pH조건에서보다 pH $5\~6$에서 형성된 플럭의 건조 비소 농도가 $990\~1,086\;mg/kg$ dry solids로 높음을 알 수 있었다. 따라서, 세척효율의 향상 여부를 파악하기 위하여 토양세척시 형성되는 플럭의 제거 유무에 따른 연속 토양세척 실험을 수행하였다. 0.2 M염산을 사용하여 플럭을 제거한 토양을 염산 1 M로 세척한 다음 1 M 수산화나트륨으로 연속 세척한 결과, 비소 농도는 약 1.5 mg/kg dry soil을 보였다. 각 단계마다 발생된 세척유출수기 비소 농도는 약 $2\~3\;mg/L$이었으나, 각각의 세척유출수를 혼합하는 경우 비소 농도가 $50\;{\mu}g/L$ 이하로 감소되었는제 이는 비소가 응집${\cdot}$침전으로 제거되는데 유리한 pH조건으로 변환되기 때문인 것으로 판단된다.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.359-366
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at$95^\circ{C}$ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.1-1
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at 95℃ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• 한국식품과학회지
• /
• 제30권5호
• /
• pp.1152-1157
• /
• 1998

양질의 고등어 냉동 surimi를 대량으로 생산하기 위한 기초자료를 얻기 위하여 상압과, 660 및 560 mmHg의 감압 하에서 알칼리수세한 육을 가지고 setting온도 및 시간을 각각 달리 하여 surimi setting gel 및 cooked gel을 제조하고 setting조건이 surimi의 gel화 특성에 미치는 영향을 검토한 결과, 고등어 surimi gel 제조를 위한 가장 적합한 setting온도는 $35^{\circ}C$이었으며 setting시간은 6시간이었다. Transglutaminase활성은 560 mmHg의 감압 하에서 수세하고 $35^{\circ}C$ 에서 6시간 setting하여 제조한 setting gel에서 3.932 nmol/mg으로써 전체 중 가장 높았으며 전자현미경사진에 의한 setting gel 조직의 관찰결과, 역시 560 mmHg의 감압 하에서 수세하고 $35^{\circ}C$에서 6시간 setting한 것이 가장 양호한 것으로 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.131-136
• /
• 2004

The effects of salt concentration and heating conditions on the thermal gelation properties of surimi produced from mechanically deboned chicken meat (MDCM) were investigated. Chicken surimi was manufactured by washing (MDCM: 0.5% NaCl=1:4), standing, straining and centrifuging. The fat, water-soluble protein and heme pigment in the MDCM were removed by increasing washing cycles. The compressive force of the chicken surimi increased as the concentration of salt was increased from 0% to 5%. Total gel strength of the surimi measured by texture profile analysis showed a maximum in the range 3-5% NaCl. Microstructural analysis showed that the unfolding network structure of the surimi gel began to appear at NaCl concentrations>2%. The optimum heating condition for gelation was $90^{\circ}C$ for 40 min as this resulted in maximum values for measures of gel strength including compressive force, hardness, fracturability, adhesiveness, springiness, gumminess, chewiness and resilience. Chicken surimi gel formed by cooking at a heating rate of $1^{\circ}C/min$ to $90^{\circ}C$ showed better a texture than gels produced at $1.85^{\circ}C/min$. Our result show that a lower rate of heating improves chicken surimi gelation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.19-24
• /
• 2003

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.13-30
• /
• 2010

Existing domestic ink market had some problem because of dependence on CPP import, increasing cost, competitive price. For this reason, previous speed of research and developments are very slow. Therefore, develop the new waterborne type of non-chlorine resin, enhance the nation's position with manufacturing outstanding products. Through this thesis, the purpose is mix the polar resin and non-chlorine resin with many proportion and manufacturing better product than existing resin. Pilot production samples have run the test of adhesion, transparency, water resist and resist high pressure car washing. In conclusion, this thesis found that mix acryl Urethane resin and Non-Chlorine resin is the optimum condition.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.257-262
• /
• 2011

The dish cloth requires antimicrobial activity for hygienic purpose. Until now, organic antimicrobial agents of low cost have been frequently used for the anitimicrobial finishing. However, a cleaner hving anitimicroial activity should be more durable considering consumers' ever-increasing expectation. In this study, the cleaner containing the bamboo fiber were finished with a formulation of a new zirconium-containing inorganic agent of zirconium phosphate and polyurethane binders. The optimum treatment condition was investigated. And its durability against repeated laundering cycles was assessed. The existence of Zr after the repeated laundering was verified and the antimicrobial effect did not decrease under 30 washing cycles.

• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.254-262
• /
• 2014

In this study, the colorants of Wisteria floribunda leaf were extracted with water. Silk and wool fabrics have been dyed with the aqueous extract of Wisteria floribunda leaf and their dyeabilities was studied. Additionally the fastness to washing, drycleaning, light and perspiration were also investigated. Silk and wool fabrics dyed with the extract of Wisteria floribunda leaf were colored in yellowish red tint. The optimum dyeing condition of the colorants extracted from Wisteria floribunda leaf was three repeated dyeing at 70, $95^{\circ}C$ for 1hr using post mordanting. For dyed silk and wool fabrics, the fastness to washing was improved by mordanting, and the fastness to drycleaning was very outstanding.