• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.339-345
• /
• 2013

This study is to derive from the required performances and the optimum mix proportion of the roof concrete placed in the in-ground LNG storage tank with a capacity of 200000 $m^3$, and propose the actual data for site concrete work. The concrete placing work without sliding and segregation in the fresh concrete condition is very important because the slope of domed roof is varied in the large range by its curvature. Also the control of hydration heat and the strength development at test ages are classified with massive section about 1.4 m thick and considered to the pre-stressing work and removal of air support after concrete placing work. Considering above condition, slump range is selected $100{\pm}25$ mm under the slope $20^{\circ}$ and $150{\pm}25$ mm over the slope $20^{\circ}$ s until 60 minutes of elapsed time. Also, the roof concrete is satisfied with compressive strength range including design strength at 91 days (30 MPa), pre-stressing work at 7 days (10 MPa), air support removal work at 21 days (14 MPa). Replacement ratio of limestone powder is determined by confined water ratio test and main design factors include water-cement ratio (W/C), sand-aggregate ratio and dosage of admixture. As test results, the optimum mix proportion of the roof concrete used low heat cement is as followings. 1) Replacement ratio of limestone powder 25% by confined water ratio test 2) Water-cement ratio 57.8% 3) Sand-aggregate ratio 42.0%. Also, test results for the adiabatic temperature rising test is satisfied with its criteria and shown the lower value compared to preceding storage tank (TK-13, 14). These required performances and the optimum mix proportion is to apply the actual construction work.

• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.211-218
• /
• 2013

This study was conducted to investigate the quality characteristics of eight Kimchi cabbage cultivars and the effect of cold storage on the quality of two kinds of cabbage cultivars, such as 'CR-Nongshim', and 'Ryouckgwang'. Early planted and harvested cultivars at July showed that fresh weight was lower than late harvested cultivars at September, because early harvesting time of July was heavy rainy season at highlands of Gangwon province. The firmness was more than 10 N for all cultivars and 'Cheongock', 'Sanjanggoon', and 'Ryouckgwang' cultivars had high value of firmness among them. No differences among the cultivars were found in appearance, freshness, and texture evaluations at harvest. Sweetness and bitterness had statistical differences and showed high value in 'Ryouckgwang' and in 'CR-Nongshim' and 'Sooho'. Two Kimchi cabbage cultivars such as 'CR-Nongshim' and 'Ryouckgwang' were stored at $0^{\circ}C$, $2^{\circ}C$, $5^{\circ}C$, and room temperature ($25^{\circ}C$) with more than 90% RH. Significant difference was found in weight loss during room and low temperature storage. In general, weight loss of the Kimchi cabbages at room temperature was significantly increased by 15% within 3 days, whereas it was delayed at low temperature until 3 weeks on all Kimchi cabbage cultivars. Firmness of 'CR-Nongshim' was higher than 'Ryouckgwang' but there was no difference within low storage temperatures. Appearance among the sensory factors was a critical indicator to estimate storage periods. On the point of appearance, storage period at $0^{\circ}C$ was 1 week and $2^{\circ}C$ and $5^{\circ}C$ was 3 weeks and 1 week in 'CR-Nongshim' cultivar, respectively. The storage period of 'Ryouckgwang' cultivar was 2 weeks, 4 weeks, and 2 weeks, respectively. Conclusively, storage at $2^{\circ}C$ with more than 90% RH was recommended as optimum temperature to maintain quality in both cultivars.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1030-1035
• /
• 2002

Despite health benefits derived from fish oil, polyunsaturated fatty acids (PUFAs) contained in fish oil are susceptible to lipid oxidation. To determine the optimum condition for maintaining good quality cooked fish during storage, mackerels were broiled with salt or soysauce condiments, and the lipid oxidation during 12 days of storage at refrigerated condition was measured. Peroxide value of broiled mackerel group with salt significantly increased after immediate cooking and maintained higher value throughout the storage period compare to the soysauce-added group, but showed similar value to the control group. Conjugated diene content in the soysauce-group was lower than the control and salt-added groups. Malondialdehyde content of broiled mackerel increased twofold and showed similar values in soysauce-added and the control groups during storage, whereas increased in the salt-added group significantly. Fatty acid compositions of the three mackerel groups changed after cooking, whereas that of the control group was almost stable during storage. In comparison with raw mackerel, the ratio of PUFA and saturated fatty acids decreased significantly, and the content of n-3 family fatty acid decreased from 25.53 to 20.63% in salted broiled mackerel. Soysauce group showed no reduction of PUFA with increasing storage time and showed the highest ratio of n-3/n-6 among the three groups at 10 days storage. Results reveal soysauce condiment protects against lipid peroxidation of broiled mackerel. Maillard reaction products (MRPs) found in soysauce might be responsible for the inhibitory effect and is a good condiment for extending storage life of cooked fish containing high amount of PUFA.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.902-911
• /
• 2010

Oriental melon ($Cucumis$ $melo$ var. $makuwa$) is a popular and high-value market fruit cultivated in Korea. Consumers are becoming increasingly interested in oriental melon as a healthy diet over the past few years. However, the melons have relatively high quality loss because the fruit are mainly produced for a limited period of time in the summer season. Lack of the proper postharvest treatments and high temperature exposure at harvest or during distribution are the most critical environmental factors limiting postharvest life of fruit. This review focuses on the overview of current research studies for postharvest treatment and functional packaging technology of oriental melon in Korea. Major physiological problems of the harvest fruit include the ripening process in quality changes of the produce such as loss of weight, firmness, flavor, and decay during the storage periods. Low temperature at 7 to $10^{\circ}C$ with high relative humidity of 90 to 95% is the suitable environmental condition used to maintain the quality of fresh oriental melon. Controlled atmosphere (CA) storage or modified atmosphere (MA) packaging can be used as supplemental treatments to extend postharvest-life. For oriental melon, an optimum CA is currently recommended to be 2-3% oxygen and 5-10% carbon dioxide atmosphere. Precooling, pretreatments of ethylene action and functional packaging system can be applied to oriental melon after harvest in order to extend storage life. Major active packaging technologies are concerned with a selectively gas permeable film related to respiration of produce and the packaging applications of ethylene removal, antimicrobial, and antifogging substances to keep the effective freshness of fruit.

• Korean Journal of Poultry Science
• /
• v.29 no.2
• /
• pp.89-94
• /
• 2002

This study was performed to evaluate effects of different holding temperatures and storing periods during the pre-incubation period on egg hatchability of hens egg in broiler breeders. For the treatments 1(T1)~7(T7), which were stored fur 1(T1) to 7 days(T7) before egg incubation, respectively. There were three replicates per treatment and forty eggs per replicate. This study was performed twice, which were 40(Summer) and 50 weeks of age(Autumn) in broiler breeders. Storing ambient temperature of egg, egg weight, at 0 and 18 days during incubation, fertility, hatchability and embryo mortality were examined. Average hatchability was rapidly decreased only in Summer. Although it was not significantly different in Autumn. This experiment was concluded that storing periods of hatchery egg was influenced hatchability, especially in high ambient temperature conditions(Summer, above $25^{\circ}C$ ). In conclusion, we found out that optimum hatchability can be achieved with a storage temperature of 13 ~$19^{\circ}C$ for broiler breeder eggs stored for up to 7 days.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.343-350
• /
• 2017

Effects of high pressure processing on physicochemical and microorganisms properties in birch sap were investigated using variable high pressure processing conditions. The viable cell counts of untreated birch sap was 4.0 log CFU, whereas high pressure processed sap were not detected. In birch sap was treated with 450 to 550 MPa, microorganisms were not detected during storage period, and physicochemical properties as well as color were slightly changed. The more processing time and pressure, its quality variations were more stable and then its optimum processing condition was determined with 120 sec at 550 MPa. The microorganisms and physicochemical properties of treated birch sap were investigated during storage at $5^{\circ}C$ and $10^{\circ}C$ for 45 and 28 days. Changes of physicochemical properties of treated birch sap were smaller than those of the untreated, but viable cell count were not detected during storage period. As for pH, $^{\circ}Brix$, and turbidity result of birch sap, quality shelf life of control and treatment were 4 and 24 days, respectively. Especially, ${\Delta}E$ value of instrumental color was untreated birch sap 4 days similar with the high pressure processed it for 28 days. These results indicated that the high pressure processing can be used as an effective method to improve the shelf life of birch sap.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.497-502
• /
• 2011

Broccoli is considered as one of the functional foods to offer a hearty supply of the nutrient-rich vegetable in the world. Broccoli contains high level of phytochemicals, and that is selected as one of the top 10 vegetables for human health promotion. Especially, glucosinolates and flavonoids are well known as anti free oxygen radicals in vegetables and fruits. In Korea, broccoli consumption has increased to well known on the health-beneficial vegetables since 2000. However, broccoli has many problems of postharvest management since the quality of harvested heads quickly declines. Major problems are the floret yellowing, wilting, off-odor, and decay. The multiple postharvest applications improve broccoli quality and cold treatment including pre-cooling extends on the shelf-life with circumstance of optimum storage which is 0℃ temperature and a range of 95-100% relative humidity. Controlled atmosphere or modified atmosphere packaging can be used as supplemental treatments to extend postharvest life. 1-2% O₂ + 5-10% CO₂ is currently recommended for broccoli. Postharvest management is important for broccoli because price fluctuations depend on harvest time and quality. In this study, we tried to review physiological change of broccoli after the harvest, storage method, and various techniques to optimize quality during distribution.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.3
• /
• pp.369-376
• /
• 2001

The optimization of resonator and laser power supply has been considered to be significant for improving the efficiency of a pulsed Nd:YAG laser system. We have proposed a new method of 3-mesh parallel sequential charge and discharge circuit as a laser power supply; more compact than conventional power supply, competitive in price, easy to control the laser power density according to various material processing, and equipped with the optimum reflectivity of output coupler. In this study, we could find that the maximum laser output was obtained by using 85% of reflectivity in the case of 50[W]-class. In addition using the power supply of new method, it's possible to charge each capacitor bank with a higher energy within the given charging time adopted a new method mentioned above; namely, we can allow each capacitor to have much more charging time and storage energy. So, higher laser output was obtained than conventional power supply.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.449-455
• /
• 2002

This paper considers that advanced planning and scheduling (APS) in manufacturing and the efficient purchasing where each customer order has its due date and multi-suppliers exit We present a Make-To­Order Supply Chan (MTOSC) model of efficient purchasing process from multi-suppliers and APS with outsourcing in a supply chain, which requires the absolute due date and minimized total cost. Our research has included two states. One is for efficient purchasing from suppliers: (a) selection of suppliers for required parts; (b) optimum part lead­time of selected suppliers. Supplier selection process has received considerable attention in the business­management literature. Determining suitable suppliers in the supply chain has become a key strategic consideration. However, the nature of these decisions usually is complex and unstructured. These influence factors can be divided into quantitative and qualitative factors. In the first level, linguistic values are used to assess the ratings for the qualitative factors such as profitability, relationship closeness and quality. In the second level a MTOSC model determines the solutions (supplier selection and order quantity) by considering quantitative factors such as part unit price, supplier's lead-time, and storage cost, etc. The other is for APS: (a) selection of the best machine for each operation; (b) deciding sequence of operations; (c) picking out the operations to be outsourcing; and (d) minimizing makespan under the due date of each customer's order. To solve the model, a genetic algorithm (GA)-based heuristic approach is developed. From the numerical experiments, GA­based approach could efficiently solve the proposed model, and show the best process plan and schedule for all customers' orders.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.2
• /
• pp.171-180
• /
• 2016

The purpose of this study was to develop a cooking method for skate pipyun made from skate skin and water. As the gel formation conditions, several skin contents (30~60%) and cooking times (10, 14, and 18 min) were determined. Test for quality characteristics of pipyuns was carried out by measuring texture, water content and pH, sensory evaluation, and heat stability of pipyun gel: five samples (S2: 40%, 10 min, S3: 50%, 10 min, S6: 40%, 14 min, S9: 30%, 18 min, S10: 40%, 18 min) with appropriate gel texture were selected based on their hardness, adhesiveness, and springiness. There was no difference in color among the five pipyuns. Hardness, chewiness, and gumminess of pipyuns significantly increased depending on skate skin content and cooking time. Water contents were significantly higher in S2 (83.40%) and S6 (82.97%). The pH levels of pipyuns appeared to be weakly alkali in the range of 8.17~8.71. In the sensory evaluation, S2 was the most preferred overall with significantly higher evaluation of transparence, gloss, and smoothness. The stability of gels S2 and S9 decreased during storage at $10^{\circ}C$ for 8 hours, and at $20^{\circ}C$ for 60 min. Therefore, heating a mixture of 40% skate skin with 60% water for 10 min is recommended as optimum conditions for producing skate pipyun.