• Journal of Ginseng Research
• /
• 제6권1호
• /
• pp.84-99
• /
• 1982

Water content and its seasonal change in reprodltctive organs were reviewed in relation to cultivation practice s. Precipitati on and humidity under shade roof were reviewed in relation to shading ,jystem and environmental factors. High water content of reproductive organs suggests vulnerability to water stress during reproductive growth stage. Watering during dehisconce treat menu seems to keep optimum temperature but cnoventional practice seems to be too often In watering. Information effe on water physiology of seeds is too rare to develop seed storing method and ctive seed use. Dehiscent mechanism was considered in terms of water absorption of embryo. Precipitation rate of conventional shade roof reaclled to 38% and at line level 50% and varied with shade patterns. Precipitation rate under shade has been investigated for itself but should be investigated in relation to light intensity and soil moisture content Relative humidity under shade depends mainly on air humidity and soil moisture, considerably on shade materials and lithe on pole height, bed width or plant density. Since relative humidity was lower in afternoon it was often less than 50% even in summer with high temperature suggesting possible disorder of phi biological function especially in photosynthesis. More information was needed on optimum humidity for productive physiological function of leaf.

• KSBB Journal
• /
• 제28권3호
• /
• pp.170-176
• /
• 2013

The purpose of this study was to determine optimum condition of Pavlova lutheri and Phaeodactylum tricornutum. Detailed studies were carried out on the effects of various wavelengths of light-emitting diodes (LEDs), light intensities and air flow rations. For the Pa. lutheri, cell growth rates and maximum cell concentrations were similar regardless of wavelengths and air flow rates. Among the different light intensities, cell concentration increased when light intensity of red LED increased. For Ph. tricornutum, red LED was found to be the most effective light source, and light intensity of 3,100 Lux resulted in the most effective for the cultivation of Ph. tricornutum. Different air flow rates were tested to overcome shading effects due to denser cell concentration in the solution. Aeration of 0.8 vvm was determined to be the optimum aeration rate for the cultivation of Ph. tricornutum. Especially, five and two times greater cell concentrations of Pa. lutheri and Ph. tricornutum, respectively, were observed when air was applied.

• 소성∙가공
• /
• 제14권4호
• /
• pp.360-367
• /
• 2005

The injection-molded plastic parts have many surface defects: warpage, weldline, flowmark, zetting, scratching, shading and so on. As weldline was one of the major surface defects in the case of desktop monitor, warpage and surface shrinkage are the bigger problems of LCD monitor in the pursuit of light weight and thinner thickness of parts. Some measures to improve these defects were introduced in this paper. Based on these, the laboratory work to find out the optimum processing conditions and to get the best parts was repeated injection moulding try-out after reflecting these improvements. The defects of warpage and surface shrinkage was significantly improved after the improvements in the case of the 20.1 inch even if in the 15 and 17inch case the warpage size was a lttle over the allowed specification because of not taking the measure for parts design within the allowable limits from the required specification in the cause of cost down.

• Journal of Plant Biology
• /
• 제15권2호
• /
• pp.7-19
• /
• 1972

The studies of density effect or the effect of population density on plant growth have been done on basis of dry matter production with Raphanus acanthiformis var. simoodaeguen, Brassica campestris var. Pekinensis f. namsounsokoombecheu, Oryza sativa f. kimmajae and O. sativa f. mangyeng grown in the various spacing. 1. In the early period of plant growth in dry weight was not different each other among varying densities, but as time advanced the plant grown vast space grew sufficiently compared with those of narrow one. 2. Iogarithmic relation between the growth of plant (W) and the density (P), log W-log P in the material plants, were approximated by two straight lines, one was horizontal line and another inclined: the former showed non-competition density and the latter competition density addition to these the point interlinking both lines were implied of the optimum density per unit land area at certain growth period. 3. The values of relatvie growth rate (RGR) and net assimilation rate (NAR) were decreased as increase in the density, while those of leaf area ratio (LAR) were rather increased in the same condition, with minor exception. From these results and relation between the productive structure and due to lack of the recieved light intensity owing to the mutal shading among the plants.

• 한국잠사곤충학회지
• /
• 제39권2호
• /
• pp.101-105
• /
• 1997

Most of the mulberry saplings in Korea have been produced by grafting. But the production of mulberry sapling by this method is very complex process and requires high level of technique and two years to produce saplings. Therefore, to develop the mulberry sapling production system by softwood cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to mulberry varieties, showing the highest rooting ratio of 93.3% in cultivar of Shingwangppong. Of different soil texture as for rooting media, the clay was found to be the best; other media decreased in order as follows; sand, sand loam and vermiculite. The shading ratio by 70% with polyethylene film showed the highest rooting ratio of the cuttings. Optimum day of cutting was around 50th day after sprouting, whereas the ratio of stem thicker than 7mm at the base of saplings in diameter was highest at 44th day.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.48-53
• /
• 2004

Injection molded plastic parts have many surface defcts: Warpage, wedline, flowmark, zetting, scratching, shading and so on. In the desktop mnitor's case, Weld line have been one of the main surface defects. Nowadays in the pursuit of light weight of parts, one of the big problems of LCD Monitor thinks Warpage and surface shrinkage. In this paper, we introduce some instances for prevevting these defestcs in the side of mould drawing, parts drawing and processing condition. Based on these, we tried to find out the optimum processing conditions through repeatedly tried injection moulding after reflecting these instances.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.187-195
• /
• 2011

Glass Envelope is vulnerable to insulation performance and controling solar radiation. Insulation performance is consistently improving these days due to recent building energy saving policy in South Korea. However, solar control at glass envelope is still limited to meeting requirements of ideal high performance. Generally, Inside Blind plays an important role of solar control instead of glass which have a characteristics of transmitted solar. Unfortunately, most of them are controled by occupants and which method is not resonable in building energy. Therefore, achieving the high efficient performance building, automated control blind system considering reduction of building loads have to be adopted. Furthermore, considering occupants visual comport about removing discomfort glare is also essential.

• KIEAE Journal
• /
• 제7권5호
• /
• pp.41-46
• /
• 2007

The lightshelf system, a horizontal shading and light redirect device, should improve the visual environment by optimal light distributions and intense illumination levels of a interior. This study aims to evaluate the daylighting performance of window integrated lightshelf systems by computer simulations. For the study, the standard office plan is analyzed through the field surveys. And then, the various lightshelf types attached window systems are picked out from existed research results. The max, minimum and average illuminance levels of interiors and illuminance distributions are evaluated by Lightsacpe 3.2 programs based on the installing height, shape type and moving angle of lightshelfs. As results, it is suggested that the optimum lightshelf shapes are the height 1.8m and the width 600mm. Also, in mixed lightshelf, the outside width 600mm, inside width 400 are efficient on indoor daylighting performance.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.94-102
• /
• 2020

Considering that the output voltage and current of a single PV panel are limited in PV power generation, a PV array should be constructed by connecting several PV panels in series and parallel to meet the required voltage/power levels for power generation capacity. When a PV array is partially shaded, the maximum power generation depends on the configuration of a PV array and the presence or absence of blocking diodes. This study considers six PV array configurations and the presence or absence of blocking diodes. An optimum connection structure was proposed to maximize power generation in a partial shadow condition. Results were verified through simulation and an experiment.

• 한국초지조사료학회지
• /
• 제13권2호
• /
• pp.93-98
• /
• 1993

To determine the effects of potassium($K_2O$) fertilization level(0, 100, 200 and 300 kg/ha/year) on the growth, dry matter(DM) yield, nutritive value and nitrate nitrogen($NO_3$-N) concentration of grasses grown under shading condition, this experiment was carried out in Grassland Div., LES, 1989. The plants were sampled on different growing seasons (spring, summer and autumn) and growth stages (grazing and soiling), respectively. Shade was controlled artificially ca. 45-50%, and the level of nitrogen fertilization was 200 kg/ha/year in all treatments. Higher DM was produced in spring 1, 453 kg at grazing and 2, 364 kg/ha at soiling stage, and DM production was increased with increasing level of $K_2O$. In this experiment, the optimum amount of $K_2O$ fertilizer was 200 kg/ha. The neutral detergent fiber, acid detergent fiber, DM digestibility, and relative feed value of grasses were not affected by $K_2O$ fertilization, regardless of growing season and growth stage. The $NO_3$-N concentration of grasses grown in spring was very low (ca. 1.0%), regardless of growth stage and $K_2O$ level. However, $NO_3$-N concentration was very high in summer and autumn season, also $NO_3$-N was decreased significantly with increasing level of $K_2O$ fertilization (P<0.05). Application of $K_2O$ fertilizer, therefore, is thoughs to be desirable for reducing $NO_3$-N concentration of grasses, especially in summer and autumn season. So annual split fertilization of $K_2O$ could be recommended on woodland pasture.