• 대한간호학회지
• /
• 제5권2호
• /
• pp.38-50
• /
• 1975

This study was conducted to find the shortest optimum time for taking oral temperature and axillary temperature, which does not affect reliability of body temperature. For this purpose, first, the time at which all the samples are reaching maximum temperature is identified Second, the mean maximum temperature is compared with the mean temperature of each consecutive measurement by T-test to find the time at which no significant changes in temperature occurs along time sequence. Third, optimum temperatures are set at points of -0.2℉, -0.4℉, -0.6℉, -0.8℉, -1.0℉, -1.2℉, -1.4℉, from maximum temperature. A point of time at which 90% of samples reach at optimum temperature is identified and defined as optimum time. The study sample, a total of 164 cases were divided into two groups according to their measured body temperature. The group with body temperature below 37 $^{\circ}C$(A group) and above 37$^{\circ}$1'C (B group) were compared on the time required to reach maximum temperature and optimum temperature. The results are as follow. 1. The time required for total sample to reach maximum temperature was 13 minutes in both groups by oral method, 15 minutes in A group and 13 minutes in B group by axillary method. Time required for 90 % of cases reach maximum temperature by oral method was 10 minutes in both group. By axillary method, 12 minutes in A group. (Ref: table 2) 2. Statistical analysis by means of T-test, the time which does not show a significant change by oral method were 12 minutes in A group and 11 minutes in B group, and by axillary method 14 minutes in A group and 11 minutes in B group. (Ref: table 5, 6.) 3. Where optimum temperature was defined as maximum temperature minus 0.2 ℉, optimum time was found 8 minutes in both groups by oral method, and 11 minutes in A group and 9 minutes in B group by axillary method 4. Where optimum temperature was defined as maximum temperature minus 0.4 ℉, optimum time was found 7 minutes in A group and 6 minutes in B group by oral method, and 9 minutes in A group and 7 minutes in B group by axillary method 5. Where optimum temperature was defined as maximum temperature minus 0.8 ℉, optimum time was found 6 minutes in A group and 6 minutes in B group by axillary method (Ref: table 7, 8, 9, 10) 6. The commonly practiced temperature taking time, 3 minutes in oral method and 5 minutes in axillary method can be accepted as pertinent when physiological variation of body temperature at the mean level of -1, 2 ℉ is accepted. 7. The difference in time required to resister maximum temperature was compared between the group with body temperature below 37$^{\circ}C$ and above 37$^{\circ}$1'C, and found no significant difference in oral mettled and 1 - 4 minute difference in axillary method with shorter time requirement in feverish group.

• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.57-65
• /
• 2003

본 연구에서는 웨이퍼 레벨 진공 패키징된 MEMS자이로스코프 소자의 신뢰성 시험 및 분석을 통하여 웨이퍼 레벨 진공 패키징의 파괴 메카니즘을 연구하였다. 진공 패키징의 주된 파괴 모드는 누설, 가스투과, 그리고 outgassing이다. 누설은 접합 계면이나 재질의 결함을 통하여 주로 발생되며, 접합폭을 증가시키거나 단결정 실리콘을 사용하면 누설이 감소한다. Outgassing은 실리콘 및 유리기판의 표면 및 내부에서 발생하며 주로 $H_2O$와, $CO_2$, $C_3H_5$ 및 유기 오염물질이었다. Epi-poly의 경우 SOI 웨이퍼보다 약 10배의 outgassing을 발생시킨다. 또한 유리기판을 샌드블라스트 공정을 사용하여 가공한 경우, 약 2.5배의 outgassing 양이 증가한다. Outgassing 제거를 위해서는 접합 전에 웨이퍼를 pre-baking하는 과정이 필수적이며, outgassing의 발생을 최대로 하기 위한 최적의 pre-baking조건은 실리콘과 유리 웨이퍼를 $400^{\circ}C$와 $500^{\circ}C$ 사이에서 pre-baking하는 것이다.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.455-461
• /
• 2005

This research studied robust design of composite hand for LTR (LCD glass Transfer Robot). $1^{st}$ DOE (Design of Experiment) was conducted to find out vital few Xs. 108 experiments were performed and their results were statistically analyzed. Pareto chart analysis shows that the geometric parameters (height and width of composite beam) are more important than material parameters $(E_{1},\;E_{2})$ or stacking sequence angle. Also, the stacking sequence of mid-layer is more important than that of outer-layer. The main effect plots shows that the maximum deflection of LTR hand is minimized with increasing height, width of beam and layer thickness. $2^{nd}$ DOE was conducted to obtain RSM (Response Surface Method) equation. 25 experiments were conducted. The CCD (Central Composite Design) technique with four factors was used. The coefficient of determination $(R^{2})$ for the calculated RSM equation was 0.989. Optimum design was conducted using the RSM equation. Multi-island genetic algorithm was used to optimum design. Optimum values for beam height, beam width, layer thickness and beam length were 24.9mm, 186.6mnL 0.15mm and 2402.4mm respectively. An approximate value of 0.77mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be con trolled within $2{\%}$ of average design value

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.869-872
• /
• 2005

This research studied robust design of column part for LCD transfer system. $1^{st}$ DOE(Design of Experiment)was conducted to find out main effect factors. 36 experiments were performed and their results were shows that the geometric parameters(Low-length, Side-length, Upper-thickness, Middle-thickness)are more important than other factors. The main effect plots shows that the maximum deflection of column is minimized with increasing Low-length, Side-length, under-thickness and Middle-thickness. $2^{nd}$ DOE was conducted to obtain RMS(Response Surface Method)equation 25 experiments were conducted. The CCD(Central Composite Design)technique with four factors were used. The coefficient of determination $(R^2)$ for the calculated RSM equation was 0.986. Optimum design was conducted using the RSM equation Multi-island genetic algorithm was used to optimum design. Optimum value for Low-length. Side-length, Upper-thickness and Middle-thickness were 299.8mm, 180.3mm, 21.7mm, 21.9mm respectively. An approximate value of 5.054mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be controlled within 2% of average design value.

• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.14-20
• /
• 2015

In this study, we propose an innovative lateral force distribution building system between tall buildings by utilizing the difference of moment of inertia, as the alternative design for highly integrated city area. Considering a tri-axial symmetric conditions and boundary conditions for the three-dimensional building structure system, a two-dimensional model is composed. In the proposed indeterminate structural model, important design variables are determined for obtaining minimum horizontal deflections, reactions and bending moments at the ground level of the buildings. Regarding a case of the provided two spatial structures connected to 4 buildings, the optimum location of middle located spatial structure is 45% from the top of the building, which minimize the end moments at the bottom of the buildings. In the considered verification examples, reduced drifts at the top location of the building systems are validated against static wind pressure loads and static earthquake loads. The suggested hybrid building system will improve the safety and reliability of the system due to the added internal truss-dome structures in terms of more than 30% reduced drift and vibration through the development of convergence of tall buildings and spatial structures.

• 수산경영론집
• /
• 제33권2호
• /
• pp.75-98
• /
• 2002

As a contribution to developing fishery stock assessment, optimum sustainable yield and its international standards such as MSY, MEY, and dynamic MEY for six recommended fisheries are developed using bio-economic models. For selecting the appropriate model, five models - Schaefer, Schnute, Walters and Hilborn, Fox, and CY&P models are tested in effort and catch data of six species. Surprisingly all the models except the CY&P model failed to satisfy statistical standards such as goodness-of-fitness and reliability. Generally, the CY&P model holds good fitness and statistically significant level for all of six fisheries. However, the CY&P model for squid, where the intrinsic growth rate is high, could not explain MSY, MEY, and dynamic MEY appropriately. This study makes a contribution to develop the modified model for the intrinsic growth rate of 1. The reformulated model represents the results reasonably even though the estimated equation has not good fitness. Although most of the CY&P models appear to have good fits and validated results for some cases, these models also seem to be quite sensitive to parameters which means a more stable model should be developed and data should carefully be handled. In particular biological and technical interactions such as multispecies, predator prey relationship, age structure and mortality should be taken into account. In addition, economic factors and fishing efforts such as price, cost, technical change and a reasonable function of fishing input should simultaneously be considered.

• 한국추진공학회지
• /
• 제15권5호
• /
• pp.89-95
• /
• 2011

2021년 발사를 목표로 개발이 진행 중인 한국형 발사체는 1.5톤 급의 실용 위성을 지구 저궤도에 올릴 수 있는 3단형 로켓으로 각 단별로 독자적으로 개발된 액체 추진기관 시스템을 적용하게 될 계획이다. 새로운 액체 추진기관의 개발 수준을 평가하기 위해서는 적절한 시험 설비에서 수행되는 시스템 종합시험이 반드시 필요하다. 본 논문에서는 한국형 발사체의 개발을 위한 추진기관 시스템의 개발 인증을 위해 추진기관 시스템의 개발 단계별로 요구되는 시험의 종류와 반드시 확인해야 할 변수들을 검토하고 전체 시스템의 신뢰도 만족을 위해 적절한 시험의 횟수 및 시험 시간을 결정하는 내용을 정리하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.542-547
• /
• 1998

As the concern for a global energy conservation and environmental protection are increasing, it has been more important thing to correspond with CFC depletion. Alternate refrigerants have merit such as lower global warming effect, but also have demerits such as lower efficiency, miscibility, increasing noise and poor reliability problems. Then we have to develop more efficient, silent and robust compressors to satisfying world-wide demand. In this paper, parametric study on rotary compressor muffler for a room air-conditioner was carried out to investigate the effect of important design variables on noise by using Taguchi robust design method with signal-to-noise(S/N) ratio. Taguchi method seems to be helpful for finding optimum value of design variables for noise level. We also applied neural network to find optimal value of design variables.

• Earthquakes and Structures
• /
• 제13권2호
• /
• pp.151-164
• /
• 2017

This article aims to investigate the possible retrofitting of a deficient building with soft story failure mode by connecting it to an adjacent building which is designed based on current code with friction dampers at all floors. Low cost and high performance reliability along with significant energy dissipation pertaining to stable hysteretic loops may be considered in order to choose the proper damper for connecting adjacent buildings. After connecting two neighbouring floors by friction dampers, the sliding forces of dampers at various stories are set in two arrangements: uniform sliding force and then variable sliding force. In order to account for the stochastic nature of the seismic events, incremental dynamic analyses are employed prior and after the installation of the friction dampers at the various floors. Based on these results, fragility curves and mean annual rate of exceedance of serviceability and ultimate limit states are obtained. The results of this study show that the collapse mode of the deficient building can affect the optimum arrangement of sliding forces of friction dampers at Collapse Prevention (CP) performance level. In particular, the Immediate Occupancy (IO) performance level is not tangible to the sliding force arrangement and it depends solely on sliding force value. Generally it can be claimed that this rehabilitation scheme can turn the challenge of pounding two adjacent buildings into the opportunity of dissipating a large amount of the seismic input energy by the friction dampers, thus improving significantly the poor seismic performance of the deficient structure.

• 한국식품조리과학회지
• /
• 제27권1호
• /
• pp.75-84
• /
• 2011

The aim of this study was to develop a convenient brown sauce product with long shelf life that has similar taste and quality characteristics with sauce used in restaurants. Response surface analysis was carried out to optimize brown sauce. Extracted brown sauce powder was subjected to hot air drying, infrared drying, freeze drying, and spray drying to determine the appropriate drying method for brown sauce manufacturing. The optimum extraction conditions were set by superimposing and reading each reaction surface that satisfied all of the sensory characteristics such as color, smell, taste, concentration, and overall preference level in order to set the optimum conditions for brown sauce production. The optimum extraction conditions for brown sauce were determined to be heating time 30 min, gelatin addition quantity 9.00%, and tomato paste addition quantity 11.25%. Reliability test showed a similar value to the predicted scope when compared to the experimental value obtained under the same conditions as the predicted value according to RSM (response surface methodology), enabling verification of the derived regression formula. Product powder of ideal brown sauce by heating, infrared radiation, freezing, and spray drying and investigate result for functional tests of color, flavor, taste, viscosity, overall acceptability and show highly acceptability on powder by infrared rays and freeze-drying methods. Especially, infrared radiation method resulted in favorable color and flavor values while freeze-drying method produced good taste and viscosity values and high overall acceptability. Therefore, infrared radiation drying method and freeze-drying method to product powder.