• Nuclear Engineering and Technology
• /
• v.16 no.4
• /
• pp.181-194
• /
• 1984

The in-core fuel management problem was studied by use of the calculus of variations. Two functions of interest to a public power utility, the profit function and the cost function, were subjected to the constraints of criticality, the reactor turnup equations and an inequality constraint on the maximum allowable power density. The variational solution of the initial profit rate demonstrated that there are two distinct regions of the reactor, a constant power region and a minimum inventory or flat thermal flux region. The transition point between these regions is dependent on the relative importance of the profit for generating power and the interest charges for the fuel. The fuel cycle cost function was then used to optimize a three equal volume region reactor with a constant fuel enrichment. The inequality constraint on the maximum allowable power density requires that the inequality become an equality constraint at some points in the reactor. and at all times throughout the core cycle. The finite difference equations for reactor criticality and fuel burnup in conjunction with the equality constraint on power density were solved, and the method of gradients was used to locate an optimum enrichment. The results of this calculation showed that standard non-linear optimization techniques can be used to optimize a reactor when the inequality constraints are properly applied.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.25-33
• /
• 2006

We have extracted the material parameters such as absorption coefficients of GaN, $Al_{0.2}Ga_{0.8}N$, and Schottky contact metal Ni of Schottky Diode UV-A and B detectors using a transfer matrix method (TMM). The ratios of the absorbed light to the total incident amount at the depletion regions of GaN and $Al_{0.2}Ga_{0.8}N$ have been calculated in order to obtain the spectral responsivity. Absorption coefficients of the materials have been obtained by fitting the simulated data with measured data. The depletion layer thickness has been obtanied by capacitance-voltage measurement. The results pave the way for the optimum design of UV Schottky detectors. Since the absorption coefficient of the Ni electrode is very high, its thickness is a major factor that determines the responsivity. It is possible to attain improved UV detectors using thinnest possible Ni electrodes and wide depletion regions of GaN and $Al_{0.2}Ga_{0.8}N$.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.1
• /
• pp.36-41
• /
• 2007

Phosphate-solubilizing microorganisms were isolated from soil around Kyungnam and Kyungbook regions using potato dextrose agar-calcium phosphate medium. A fungus with the greatest phosphate-solubilizing activity was selected and identified to Aspergillus sp. PS-104, based on the morphological characteristics of conidiophore and conidia; unbranching type of conidiophore, terminally swelling of conidiophore and septate of mycelium, in malt extract agar and potato dextrose agar media. The optimum temperature and initial pH to solubilize rock phosphate in potato dextrose broth-rock phosphate medium were $30^{\circ}C$ and pH 7.0, respectively. In these optimum conditions, phosphate-solubilizing activities of Aspergillus sp. PS-104 against four twos of insoluble phosphate, tricalcium phosphate, aluminium phosphate, hydroxyapatite and rock phosphate, were quantitatively determined. As result, the maximum phosphate-solubilizing activity was obtained with tricalcium-phosphate (1,900 ppm) while minimum activity was obtained with hydroxyapatite (320 ppm). Futhermore, phosphate-solubilizing activity of Aspergillus sp. PS-104 was found higher when treated with nitrates as compared to the ammonium salts as a nitrogen sources.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.7
• /
• pp.492-497
• /
• 2011

The objective of this research is to study the variation of optimum slope angles of collectors for seven regions in Korea, which are Seoul, Gangneung, Daejeon, Daegu, Gwangju, Busan and Jeju. The results for 2000~2007 are analyzed to sec if adjustment of slope angles is necessary each year to receive maximum solar radiation. For an azimuth fixed solar collector, solar radiation of yearly optimized slope angle during May~Sept.(summer), Nov.~Mar.(winter) and the whole year are greater than the fixed slope angle by 0.03%, 0.02%, and 0.04%, respectively. For an azimuth tracking solar collector, solar radiation of yearly optimized slope angle during May~Sept.(slimmer), Nov.-Mar.(winter) and the whole year are greater than the fixed slope angle by 0.03%, 0.07%, and 0.04% respectively. It is unnecessary to adjust slope angles each year for both azimuth fixed and tracking collectors, since the gains are insignificant. Solar radiation of the azimuth tracking solar collector during May~Sept., Nov.~Mar. and the whole year are greater by 14.7%, 16.0%, and 19.2% than the azimuth fixed solar collector.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.679-687
• /
• 2011

The water management of crop is different according to the area as well as climate condition and growth stage, however it is the most important and difficult problems for the farmers. The optimum irrigation manual those irrigation interval and amount of irrigation as water saving, are developed based on the lysimeter experiments carried out by the RDA for 11 years about PET (Potential Evapo-Transpiration), crop coefficient (Kc). The average PET (Potential Evapo-Transpiration) during 30 years of 45 regions for the autumn chinese cabbage cultivation was a $2.17mm\;day^{-1}$.

• Ocean and Polar Research
• /
• v.44 no.4
• /
• pp.365-372
• /
• 2022

The present study measured the growth performance of juvenile hybrid of red-spotted grouper ♀ × giant grouper ♂ (RGGG) across four water temperatures (19, 23, 27, and 31℃) and compared it to those of maternal purebreds (red-spotted grouper ♀ × ♂, RG) for eight weeks. The specific growth rate (SGR) and weight gain (WG) of RGGG increased as temperature increased, with greater SGR and WG at higher temperatures (27 and 31℃) than RG. The condition factor of RGGG was higher than that of RG and there were no differences between temperature groups within breeding lines. Food consumption increased at higher temperatures for both RGGG and RG, and was the highest in the 31℃ group. Similar to the SGR and WG, the food conversion rate (FCR) in RGGG decreased with increasing water temperature, with the significantly lowest value at 31℃; in RG, however, FCR progressively decreased in the 27℃ group, then increased in the 31℃ group. Furthermore, the FCR of the 31℃ group of RGGG, which had the lowest value among the RGGG groups, was lower than that of the 27℃ group of RG, which had the lowest RG value. In the analysis of nonlinear regression curves within the range of experimental temperature, the optimum temperature for SGR and FCR in RGGG was 31℃, unlike in RG. In conclusion, the growth performance of juvenile RGGG seems to have largely improved from the influence of paternal traits, hybrid with giant grouper, and it is presumed to be more profitable for commercial production in tropics/subtropics.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.46-54
• /
• 2011

In this paper, we propose a low-complexity loop filtering method depending on transform-block regions. Block adaptive loop filter (BALF) was developed to improve about 10% in compression performance for the next generation video coding. The BALF employs the Wiener filter that makes reconstructed frames close to the original ones and transmits filter-related information. However, the BALF requires high computational complexity, while it can achieve high compression performance because the block adaptive loop filter is applied to all the pixels in blocks. The proposed method is a new loop filter that classifies pixels in a block into inner and boundary regions based on the characteristics of the integer transform and derives optimum filters for each region. Then, it applies the selected filters for the inner and/or boundary regions. The decoder complexity can be adjusted by selecting region-dependent filter to be used in the decoder side. We found that the proposed algorithm can reduce 35.5% of computational complexity with 2.56% of compression loss, in case that only boundary filter is used.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.12 no.1
• /
• pp.103-130
• /
• 2008

Background: For standardizing of Han-Yeol [寒熱], which is a kind of diagnosis method in oriental medicine, it is necessary to investigate into relationship of symptoms and signs representative of Han-Yeol [寒熱] to the biofunctional medical signals; thermal temperature by Thermography, Pulse-Respiration Ratio and so on. By correlation analysis of these data items acquired from patients, it could be provides the fundamental data for standardizing of Han-Yeol [寒熱]. Objectives: We performed this study to check the characteristics of thermal temperature with Han-Yeol [寒熱] statue by pulse-respiration ratio. Methods: We selected nine regions around acupoints including Yin dang[印堂], Sugu[水溝, GV26], Ch'ondol[天突, CV22], Chonjung[CV17], Chung-wan[中脘, CV12], Chonchu[天樞 S25], No-gung[勞官, P8], and calculated based on the utility of R.O.I.(Region of Integer) by IR-2000 these points temperature from 68 subjects. In practicing pulse-respiration ratio over 4.0 means the statues of Yeol [熱], pulse-respiration ratio below 4.0 means the statues of Han [寒]. To optimum conditions thermal temperature, which are not effected by internal and external variables, we studied preceding research. The results shows that optimal time period is 20minutes after undressed and the optimal region is the region around acupoints including Sugu [水溝, GV26]. Based on a preceding research results, we analyzed these data by Paired T-test between GV26 Region and 8-Thermography Regions and two-way repeated ANOVA with thermography$({\Delta}T)$ and Han-Yeol [寒熱] statue by pulse-respiration ratio. Results: 1. In applying of two-way repeated ANOVA with thermography$({\Delta}T)$ and Han-Yeol [寒熱] statue by pulse-respiration ratio, Sugu [水溝穴, GV26] - [印堂穴, HN1], Sugu 水溝, GV26] - Chonjung[CV17], Sugu [水溝, GV26] -Chung-wan[中脘, CV12]had significant differences. 2. In applying of Paired T-test between Sugu [水溝穴, GV26] Region and 8- Thermography Regions, there were significant differences except of Sugu [水溝穴, GV26] -Chondolp[天突, CV22]. 3. In the difference of Sugu [水溝, GV26] -Chung-wan[中脘, CV12], thermal temperature increases a lot in the statues of Yeol [熱], thermal temperature decreases a lot in the statues of Han [寒]. Conclusions: On the analysis of Thermography, we obtain the measurement conditions were considered the individual variations. And it is different that the thermal temperature change on Thermography according to Han-Yeol [寒熱] statue by pulse-respiration ratio.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.693-699
• /
• 2001

An intracellular levansucrase gene, lscR from Rahnella aquatilis ATCC 15552, was cloned and its nucleotide sequence was determined. Nucleotide sequence analysis of this gene revealed a 1,238 bp open reading frame coding for a protein of 415 amino acids. The levansucrase was expressed by using a T7 promoter in Escherichia coli BL21 (DE3) and the enzyme activity was detected in the cytoplasmic fraction. The optimum pH and temperature of this enzyme for levan formation was pH 6 and $30^{\circ}C$, respectively. The deduced amino acid sequence of the lscR gene showed a high sequence similarity (59-89%) with Gram-negative levansucrses, while the level of similarity with Gram-positive enzymes was less than 42%. Multiple alignments of levansucrase sequences reported from Gram-negative and Gram-positive bacteria revealed seven conserved regions. A comparison of the catalytic properties and deduced amino acid sequence of lscR with those of other bacterial levansucrases strongly suggest that Gram-negative and Gram-positive levansucrases have an overall different structure, but they have a similar structure at the active site.

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.295-309
• /
• 2020

The construction of Reinforced Concrete (R/C) buildings with unreinforced masonry infills is part of the traditional building practice in many countries with regions of high seismicity throughout the world. When these buildings are subjected to seismic motions the presence of masonry infills and especially their configuration can highly influence the seismic damage state. The capability to avoid configurations of masonry infills prone to seismic damage at the stage of initial architectural concept would be significantly definitive in the context of Performance-Based Earthquake Engineering. Along these lines, the present paper investigates the potential of instant prediction of the damage response of R/C buildings with various configurations of masonry infills utilizing Artificial Neural Networks (ANNs). To this end, Multilayer Feedforward Perceptron networks are utilized and the problem is formulated as pattern recognition problem. The ANNs' training data-set is created by means of Nonlinear Time History Analyses of 5 R/C buildings with a large number of different masonry infills' distributions, which are subjected to 65 earthquakes. The structural damage is expressed in terms of the Maximum Interstorey Drift Ratio. The most significant conclusion which is extracted is that the ANNs can reliably estimate the influence of masonry infills' configurations on the seismic damage level of R/C buildings incorporating their optimum design.