• 한국연소학회지
• /
• 제22권3호
• /
• pp.47-52
• /
• 2017

The propellant tile and crack which account for the greatest proportion of solid rockets are profoundly affected by viscosity and mechanical properties of solid propellant. In this paper HTPB/AP/Al system propellant has been researched for the viscosity, mechanical properties and burning properties with type and contents of bonding agents. The viscosity of propellant was changed significantly depending on the type and contents of bonding agents, and mechanical properties of HTPB/AP/Al system propellant were also varied. Considering both lower viscosity and stable mechanical properties, the optimum type and contents of bonding agents can be identified as the main factors to the HTPB/AP/Al system propellant.

• 한국환경복원기술학회지
• /
• 제13권2호
• /
• pp.52-62
• /
• 2010

This study was carried out in the Tropical Plant Resources Research Center of Korea National Arboretum to determine the optimum edaphic environment for the growth of tropical and subtropical plants. The physicochemical properties of artificial substrates and the growth characteristics of tropical and subtropical plants were investigated. Subtropical plants exhibited a high growth rate when cultivated in a substrate of Dry Zone that had physical properties similar to those of arid native soil. Mediterranean plants showed a low growth rate when grown in a substrate of Subtropical Zone that required changes in acidity. The substrate of Tropical Zone had high organic matter and mineral contents and therefore had good physical properties:this substrate has a good environment for the stimulation of the growth of tropical plants. Our results indicate that the chemical properties such as pH and mineral contents of most artificial substrates need to be more urgently improved than their physical properties in order to ensure better growth of tropical and subtropical plants. Initial management strategies for the construction of new tropical greenhouses were formulated, and data from monitoring studies will be continuously gathered and incorporated in the manual to keep it updated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.972-977
• /
• 2017

고체 추진기관의 불량 발생 요인 중 가장 큰 부분을 차지하고 있는 추진제 기공 및 크랙은 추진제의 점도와 물성이 큰 영향을 미친다. 본 연구는 혼합형 고체 추진제의 한 종류인 나이트레이트 폴리이서(Nitrate Ester Polyester; NEPE)계열의 추진제에서 주로 사용되는 RDX의 입도 및 혼합 함량에 따른 추진제 점도, 기계적 물성 및 연소특성 변화를 관찰하였다. RDX 입도와 혼합 함량에 따라 미경화 추진제의 경시적 점도가 크게 변화가 되었으며, 이에 따른 추진제 물성 또한 변화가 있었다. 추진제의 낮은 점도와 안정된 기계적 물성을 동시에 고려할 때, RDX의 입도 및 혼합 함량은 NEPE계 추진제의 주요 인자로 확인할 수 있다.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.62-68
• /
• 2012

This study was carried out to evaluate the effect of PCC loading at thick stock on the physical properties of paper. The effect of starch addition(2, 4 and 6%) and mixing time(5, 10 and 20 min.) on the filler retention and paper properties were investigated. Optimum dosage of cationic starch as a fixing agent was 4%, and mixing time did not showed any significant effect on the filler retention. PCC loading at thick stock was more effective to improve bulk and opacity than PCC loading at thin stock, although their improvement was not so significant. It was also found that the strength properties could be improved by the loading at thick stock. PCC loading method at thick stock could be considered as one of potential approaches for further improving of paper properties, although further research works are required in order to apply the PCC loading at thick stock in the paper mill.

• Advances in concrete construction
• /
• 제5권1호
• /
• pp.31-48
• /
• 2017

Supplementary cementitious materials (SCM) have turned out to be a vital portion of extraordinary strength and performance concrete. Metakaolin (MK) is one of SCM material is acquired by calcinations of kaolinite. Universally utilised as pozzolanic material in concrete to enhance mechanical and durability properties. This study investigates the fresh and hardened properties of conventional concrete (CC) and self compacting concrete (SCC) by partially replacing cement with MK in diverse percentages. In CC and SCC, partial replacement of cement with MK varies from 5-20%. Fresh concrete properties of CC are conducted by slump test and compaction factor tests and for SCC, slump flow, T500, J-Ring, L-Box, V-Funnel and U-Box tests. Hardened concrete characteristics are investigated by compressive, split tensile and flexural strengths at age of 7, 28 and 90 days of curing under water. Carbonation depth, water absorption and density of MK based CC and SCC was also computed. Fresh concrete test results indicated that increase in MK replacement increases workability of concrete in a constant w/b ratio. Also, outcomes reveal that concrete integrating MK had greater compressive, flexural and split tensile strengths. Optimum replacement level of MK for cement was 10%, which increased mechanical properties and robustness properties of concrete.

• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.211-218
• /
• 2022

This study characterizes Proctor and geophysical properties in a broad range of grading and fines contents. The results show that soil index properties such as uniformity and fines plasticity control the optimum water content and peak dry unit trends, as well as elastic wave velocity. The capillary pressure at a degree of saturation less than S = 20% plays a critical role in determining the shear wave velocity for poorly graded sandy soils. The reduction in electrical resistivity with a higher water content becomes pronounced as the water phase is connected A parallel set of compaction and geophysical properties of sand-kaolinite mixtures reveal that the threshold boundaries computed from soil index properties adequately capture the transitions from sand-controlled to kaolinite-controlled behavior. In the transitional fines fraction zone between F_F ≈ 20 and 40%, either sand or kaolinite or both sand and kaolinite could dominate the geophysical properties and all other properties associated with soil compaction behavior. Overall, the compaction and geophysical data gathered in this study can be used to gain a first-order approximation of the degree of compaction in the field and produce degree of compaction maps as a function of water content and fines fraction.

• 한국터널지하공간학회 논문집
• /
• 제10권2호
• /
• pp.177-184
• /
• 2008

본 연구에서는 발파 진동 및 소음에 관한 문제를 최소화하기 위해 발파진동 파형합성과 발파 시뮬레이션을 통해 진동을 최소화시킬 수 있는 전자뇌관의 최적초시를 찾고, 또한 전단면 분할 발파의 감쇄특성에 대한 연구를 토대로 하여 전단면 다단시차 분할 발파기법을 개발하였다. 경부고속철도 OO공구 수직구 시공현장에서 전자뇌관을 이용한 파형합성 최적초시적용과 전단면 다단시차 분할발파를 동시에 수행하는 발파기법을 현장에 적용함으로써 그 타당성을 검토하였다.

• 수산해양기술연구
• /
• 제51권1호
• /
• pp.94-101
• /
• 2015

The heat treatment machine based on immersion was developed to reduce temperature difference during netting process and appraised it performance compared current heat treatment machine using high pressure. It was also reviewed the optimum heat treatment procedures for PBSAT monofilament net in accordance with the immersion time and temperature. The procedure was based on physical measurement such as breaking load, elongation and angle of the mesh for PBSAT monofilament. The water temperature gap of the treatment machine based on immersion was less than $1^{\circ}C$. and the energy consumption was also increased in high temperature condition. It was identified that the optimum temperature was $75^{\circ}C$ and its optimum processing time was between 15 minutes and 20 minutes to get qualified physical properties.

• 한국토양비료학회지
• /
• 제46권6호
• /
• pp.452-457
• /
• 2013

To obtain the useful data related to optimum nutrient management technique for pesticides-free jujube cultivation, nutrient contents of jujube leaves and fruits and the selected chemical properties of jujube orchard soils were investigated at 9 different orchards with pesticides-free cultivation in Boeun, Chungbuk, Korea. Soil and jujube leaf samples were collected from the different orchards in July and October, and jujube fruit samples were taken in October, 2012. Soil available $P_2O_5$ contents in the optimum level for jujube cultivation were 11% and 33% of total samples in July and October, respectively, but 56% of total samples was higher than the optimum level in both July and October. Exchangeable K and Ca ion contents were 44% and 67% of total samples, respectively, in both July and October, whereas exchangeable Mg ion content was 100% and 56% of total samples in July and October, respectively. Nutrient contents in jujube leaves were higher than those in fresh fruits. In addition, total nitrate, potassium and magnesium contents in the jujube leaves were higher in the samples collected in July than in October.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.918-928
• /
• 1995

This paper deals with the various mechanical properties and fatigue strength in the FRW1 (friction welded interface) of high speed steel (HSS-Co) to SM55C through the tensile test, hardness test and fatigue test. The data of FRW specimens are also compared with those of the base materials (HSS-Co and SM55C steel). Three kinds of specimens used in this study are the friction welded joints, HSS-Co and SM55C carbon steel with circumferential notch, saw notch and smooth, respectively. It is confirmed that the applied welding conditions are optimum methods in order to minimize the heat affected zone (HAZ) and hardness distribution at the HAZ. The fatigue strengths at N = 10$^{6}$ cycles of smooth, circumferential notch and saw notch specimens in the FRW joints are about 299.2 MPa, 123.8 MPa and 247.5 MPA, respectively. The fatigue strength of the friction welded joints is almost equal to that of the SM55C carbon steel in the optimum welding conditions. The fatigue cracks initiated at the welded zone are propagated along the side of SM55C steel.