• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.125-132
• /
• 2002

In order to investigate the optimum moisture content of paddy for milling process, a series of tests were conducted by examining the recovery rate and whiteness of milled rice in relation with the various moisture content. Hwabong-byeo and Dongjin-byeo varieties which were major paddies cultivated in Korea were used for the experiment. The test was performed with small experimental milling machines. In order to minimize the unexpected factors, environment conditions were kept in constant during the experiment. As a result, the recovery rate of milled rice were varied as the changes in milling time and degree of whiteness. However, the recovery rate of milled rice increases as its moisture content increases untill a certain point of moisture content and decreases slowly afterward. This certain point can be called optimum moisture content for rice milling. Also, it has a different value depending on the variety. In this experiment, optimum moisture content of Hwabong-byeo and Dongjin-byeo were considered around 14.8% and 15.3%, respectively. It is not sure that these optimum moisture contents for the two varieties would assume the same values irrespective of harvest year and place. However, it could be concluded that the optimum moisture content for rice milling is around 15%(w.b.) for Hwabong-byeo and 15.5%(w.b.) for Dongjin-byeo, respectively.

• 한국농공학회지
• /
• 제40권4호
• /
• pp.109-119
• /
• 1998

Recently pipe-framed greenhouses are widely constructed on domestic farm area. These greenhouses are extremely light-weighted structures and so are easily damaged under strong wind due to the lack of uplift resistance of foundation piles. This experiment was carried out by laboratory soil tank to investigate the displacement be haviors of cylindrical pile foundations according to the uplift loads. Tested soils were sampled from two different greenhouse areas. The treatment for each soil type are consisted of 3 different soil moisture conditions, 2 different soil depths, and 3 different soil compaction ratios. Each test was designed to be repeated 2 times and additional tests were carried out when needed. The results are summarized as follows : 1. When the soil moisture content are low and/or pile foundations are buried relatively shallow, ultimate uplift capacity of foundation soil was generated just after begining of uplift displacement. But under the high moisture conditions and/or deeply buried depth, ultimate up-lift capacity of foundation soil was generated before the begining of uplift displacement. 2. For the case of soil S$_1$, the ultimate uplift capacity of piles depending on moisture contents was found to be highest in optimum moisture condition and in the order of air dryed and saturated moisture contents. But for the case of soil S$_2$, the ultimate uplift capacity was found to be highest in optimum moisture condition and in the order of saturated and air dryed moisture contents. 3. Ultimate uplift capacities are varied depending on the pile foundation soil moisture conditions. Under the conditions of optimum soil moisture contents with 60cm soil depth, the ultimate uplift capacity of pile foundation in compaction ratio of 80%, 85%, and 90% for soil 51 are 76kg, 115kg, and 155kg, respectively, and for soil S$_2$are 36kg, 60kg, and 92kg, respectively. But considering that typical greenhouse uplift failure be occurred under saturnted soil moisture content which prevails during high wind storm accompanying heavy rain, pile foundation is required to be designed under the soil condition of saturated moisture content. 4. Approximated safe wind velosities estimated for soil sample S$_1$and S$_2$are 32.92m/s and 26.58m/s respectively under the optimum soil condition of 90% compaction ratio and optimum moisture content. But considering the uplift failure pattern under saturated moisture contents which are typical situations of high wind accompanying heavy rain, the safe wind velosities for soil sample S$_1$and S$_2$are not any higher than 20.33m/s and 22.69m/s respectively.

• 환경위생공학
• /
• 제15권3호
• /
• pp.24-30
• /
• 2000

In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The result are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 39%(kudzu), 37%(sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/N ratio 25 indicated $68^{\circ}C$(kudzu), $70^{\circ}C$(sawdust). Optimum condition of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation gravitationally dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively. Major biological reaction in the aerobic fermentation feed production occurred during 12~24hrs.

• 한국농공학회지
• /
• 제17권1호
• /
• pp.3685-3701
• /
• 1975

This study was conducted to investigate the strength of soil cements for varied molding water content and cement content(3,6,9,12%) in four cementstabilized soils(KY: sand, MH: sad, SS: sandy loam, JJ: loam). The eoperimental results obtainedfrom unconfined compressive strength tests are asfollows: 1. The optimum moisture content increased in accordance with the increase of the cement while maximum dry density didn't change uniformly. 2. The moisture content for maximum strength was higher than the optimum moisture content in the higher cement content. Moisture-density curves showed a dull peak in the higher cement contents, on the other hand, a sharp peak in the lower cement contents. 3. In molding the specimen with the approximate optimum moisture content, the maximum strength showed at the wet side of the optimum moisture content. 4. SS and JJ maybe used as cement-stabilized base of road to require 300PSI of compressive strength cured seven days, but MH and KY may be not adequate. 5. In soil cement, the better the grain size distribution was, the stronger the compressive strength was itn general. 6. The relation between 28-day strengh and 7-day strength in the cementstabilized four soils may be expressed as follows: q28=1.55q7+1.5 in which q28:28-day strength. q7:7-day strength.

• 환경위생공학
• /
• 제15권3호
• /
• pp.23-23
• /
• 2000

In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The results are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 3994(kudzu), 37%( sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/n ratio 25 indicated 68'C(kudzu), 70'C (sawdust).Optimum condition of consists of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation of gravitationally, dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively Major biological reaction in the aerobic fermentation feed production occurred during 12~14hrs

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.96-103
• /
• 1998

To study the optimum conditions of composting with industrial wastewater sludge, the variations of temperature and $CO_2$ generation amount during the composting periods were investigated. The conditions were that industrial wastewater added to bulking agents such as sawdust and rice hull was used, and differently treated with microorganism seeding or not, initial C/N ratios, air flow rate and initial moisture contents, respectively. The results were summarized as follows : Seeding 5% of microorganism was higher the temperature than not seeding. And using sawdust as bulking agents, and adjusting 30~40 of Initial C/N ratio, 200ml/l.min. of k flow rate and 67~68% moisture contents were higher the temperature than any other conditions. Seeding 5% of microorganisms was higher $CO_2$ generation amount than not seeding. And that was much in the order of 7~40, 30~34 and 22~23 of initial C/N ratio. Judging from the results, it should be considered that the optimum conditions in the composting of industrial wastewater sludge were seeding of 5% microorganisms, and adjusting 30~34 of Initial C/N ratio, 200ml/l min. of air flow rate and 67~68% of Intitial moisture contents. The contents of inorganic matters and C/N ratio during the composting periods at optimum condition were a little Increased. and heavy metals contents after composting were lower than standard for fortllizer.

• The Korean Journal of Ecology
• /
• 제6권3호
• /
• pp.227-235
• /
• 1983

This research was made over drought resistance and optimum soil moisture needed with Plantago asiatica L. as the material by means of making out the process of its growth under different soil moisture contents. The soil used for the experiment was a mixture of vermiculite and c-layer soil, and the process of growth was compared with each other controlling its soil mositure as: 7%, 15%, 30%, 45%, and 60%. In 7% range of soil moisture which was of low content, the increase of growth was neither significantly indicated nor any permanent seeding done. In view of this phenomenon, Plantago asiatica L. appeared to be highly drought-resistant. It was found rising at 30% range and reaching the optimum state at 45% range and falling down at 60% range range. In viw of this fluctuation indicated above, the optimum soil moisture content needed for the growth of Plantago asiatica L. is thought to be between 30% and 60%. It is thought the number of seed per capsule is not affected by the soil moisture content. It is expected an ecotypic variation by the soil moisture content will bring forth upon Plantago asiatica L.

• Journal of Biosystems Engineering
• /
• 제7권1호
• /
• pp.42-52
• /
• 1982

This study was intended to develop a cost function for the natural air in-bin drying: system which could lead to an optimization of the drying system cost. Based on the cost function developed, a series of simulated drying tests were conducted with 10-year weather data (1970~1979) for 7 different regions by applying an appropriate levels of system factors. System performance factors treated in this study were initial moisture content, airflow rate, bin diameter and grain depth. An optimization procedure to find the least cost system was developed as follows: First, the worst year of the past decade was determined in consideration of the dryiang time and maximum dry matter loss. Second, the minimum airflow rate for a fixed bin diameter and grain depth was determined. Third, the optimum grain depth was found for the minimum airflow rate with different initial moisture contents and bin diameters. The results obtained in this study are summarized as follows: 1. The optimization procedure developed in this study was able to reduce the time and efforts significantly. 2. Optimum values of drying parameters including airflow rate, grain depth, and fan size were determined for different initial moisture contents and bin diameters in each region. The results are shown in Tables 3 to 9. 3. Optimum grain depths decreased as the initial moisture content and airflow rate increased. 4. Drying time for the least cost system should be reduced with higher initial moisture content and lower drying potential to prevent grain spoilage. 5. The fixed cost was 65 to 75 percent of the total system cost and the variable cost was 25 to 35 percent. To reduce the fixed cost it is desirable to use a drying bin 2 or 3 times a year.

• 한국식품저장유통학회지
• /
• 제2권2호
• /
• pp.285-291
• /
• 1995

This study was performed to investigate the optimum moisture content and the best packaging method of dried persimmons for long term storage at room temperature. The package material to be used were 0.05mm polyethylene film, Wrap film, 0.08mm LDPE film exchanged nitrogen gas, and non package for untreated control. Before the storage, the initial moisture contents of dried persimmons were treated with 40%, 35% and 30%, respectively; 40% as traditional dryness, 35% as extending dry period one more week, and 30% as for two more weeks. The best package method was 0.08mm LDPE film exchanged nitrogen gas, and the optimum moisture control was 35%

• 한국연초학회지
• /
• 제17권2호
• /
• pp.149-159
• /
• 1995

The freeze drying rate was investigated under various conditions such as pressure and moisture contents in order to establish the optimum condition for expansion of the culled flue cured tobacco lamina. The optimal pressure in the chamber to maintain the heat and mass transfer was about 0.8torr, When the moisture contents of sample was 50-60%, expanding rate was the optimum condition and the rate was 67-76%. As the thickness of the sample layers was increased, drying-rate was decreased conversely and this result seemed to be due to decline of heat and mass transfer coefficients. Differences with the position of its stalk were also observed in drying rate, and low stalk position leaves of 5 and 3 was the fastest. Key words : freeze drying, Popping, expansion tobacco.