• The Korean Journal of Community Living Science
• /
• v.13 no.3
• /
• pp.27-37
• /
• 2002

To develop the processing methods of grape and increase the use of poor fruits, we researched the health drink made with them after making grape juice and vinegar. The grape heated at $80^{\circ}C$ during 30min was followed by filtration. Grape vinegar was prepared by alcohol and acetic acid fermentation of grape. Optimum initial alcohol concentration for acetic acid fermentation was 6-8%. Acetic acid fermentation of grape vinegar manufactured in onggi took 9 days and was faster than any other type of utensil. As the result of analysis of grape vinegar fermented in the various ratio of 'Campbell Early' and 'Kyoho' grape, the redness and total anthocyanin content and the score of sensory evaluation were higher in vinegar made with 100% 'Campbell Early'. The drink manufactured by adding grape vinegar was developed and adding 10% of grape vinegar to volume of grape juice and water mixture(1:1) was best in sensory evaluation. In this mixture, sugar content was $14^{\circ}$Bx.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.344-347
• /
• 2004

The amount of coal ash has been increasing and development of effective use is urgently needed. Various by-products and waste are expected to be used as resources from the point of reduction in environmental load. This is an experimental study to compare the properties of high volume coal ash concrete using the reclaimed coal ash. For this purpose, authors have started work to develop a production method of hardening coal ash concrete. Laboratory tests show that the optimum mixture of coal ash concrete can be determined from multiple regression analysis. According to test results, it was found that the compressive strength of the concrete can be determined by a single curve. And it is obtained from the analysis of the results tested for concrete with the ratio of total power to water and amount of land reclamation ash.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.65-69
• /
• 2008

The tailings piled in abandoned mines are well-known potential sources of soil contamination. Hydrated limes were applied as cementing materials to solidify heavy metal contaminated tailings for the purpose of reducing their toxicity and migration rates. The optimum mixing ratio of tailings, hydrated lime, and water was determined through a preliminary test. The mixtures of mine tailings and hydrated lime solidified through pozzolanic reaction were tested for their durability against repeated freezing and thawing processes. After repeated freezing and thawing, the uniaxial compressive strengths of all the solidified mixture specimens decreased in comparison with those before test but still higher than $3.5kgf/cm^2$, the standard recommended for land reclamation solids by EPA(Environmental Protection Agency), which suggested that hydrated lime be a potential material to treat the abandoned mine tailings for the environmental purpose.

• International Journal of Concrete Structures and Materials
• /
• v.1 no.1
• /
• pp.57-61
• /
• 2007

This study investigated the mechanical and durability performance of roller-compacted concrete (RCC) with fly ash for dam applications. A test program studied the effects on the properties of fresh and hardened RCC with fly ash replacement ratio, as well as the long-term durability of the resulting mixture. Fly ash replaced 20, 30, 40, and 50% by mass of the cement. Laboratory tests of the compressive strength, splitting tensile strength, shear strength, chloride ion permeability, abrasion, and drying shrinkage were conducted. The test results demonstrated that 30% fly ash replacement is an optimum level, and that this mixture has excellent mechanical and durability properties.

• Journal of the Korean Ceramic Society
• /
• v.18 no.1
• /
• pp.41-47
• /
• 1981

The sintering characteristics of the SiC-Clay-Kaolin chamotte system were studied by addition of $Al_2O_3$ for the manufacture of silicate-bonded silicon carbide refractories at $1350^{\circ}C$. The sinterbilit of SiC-Binder mixture was measured by apparent porosity and compressive strength. And its mineral compositions were identified with X-ray diffractometer. The following results were obtained; 1) Optimum amount of mixed clay ($\textrm{Al}_2\textrm{O}_3$ 40 wt% mixed) as a binder was about 25wt% 2) Appropriate mixing ratio of mixed Kaolin chamotte ($\textrm{Al}_2\textrm{O}_3$ 40wt% mixed) was about 30wt% in the clay Kaolin chamotte binder. 3) Variation of apparent porosity and compressive strength of sintered SiC-binder mixture fired at $1350^{\circ}C$ were due to the sinterbility of clay.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.3-8
• /
• 2000

A reaction between the depolarizing mixture in the spent manganese batteries and ($NH_4$)$_2$$SO_4$was carried out to find a new process for the extraction of Mn component from the spent manganese batteries. The optimum conditions were as follows : the reaction temperature $425^{\circ}C$, ($NH_4$)$_2$$SO_4$weight ratio to the depolarizing mixture in the spent manganese batteries 12.0, reaction time 60 min. Under above conditions manganese was extracted 93.5%.

• Nuclear Engineering and Technology
• /
• v.30 no.2
• /
• pp.140-147
• /
• 1998

Basic concept of a cold neutron source for a 30 MW heavy water moderated reactor (HANARO) is developed. The source is a cold bottle located in a vertical hole near the reactor core. Since the bottle does not have sufficient volume for cooling, the optimum liquid mixture ratio is studied between liquid hydrogen and liquid deuterium. We also studied the variation of the gain depending on the volume of the bottle. The calculation is performed by a coupled MCNP model and by a semi-analytic approach. For the current geometry, 80% liquid deuterium mixture with liquid hydrogen gives the highest gain at 10 A neutron wave.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.99-105
• /
• 2003

The configuration of intake port is a dominant factor of inlet air flow and mixture formation in an engine. In this study, as an available technology to optimum intake port, the flow box system using resine has been applied. So we presents a methodology for estimating inlet flow characteristics in this paper. This quantified experimental result shows good agreements with visualization data in a cylinder. We obtained the optimal value of swirl ratio and flow coefficient under steady flow rig test for new development of intake port for heavy-duty engine. From this results, the cylinder heat with a good evaluated swirl flow characteristics was developed and adapted for a 11L heavy-duty engine using the liquid phase LPG injection (LPLi) system. This .research expects to clarify major factor that make the intake port efficiently.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.793-797
• /
• 2005

Optimum conditions for cholesterol removal in egg yolk were evaluated based on ratio of egg yolk-to-water, crosslinked ${\beta}$-cyclodextrin (${\beta}$-CD) concentration, and mixing temperature, time, and speed by adding crosslinked ${\beta}$-CD treated with adipic acid. Cholesterol removal in egg yolk-water mixture increased with increasing ${\beta}$-CD level (10-25%). About 95% was removed by 25% ${\beta}$-CD at 1:1 ratio of egg yolk-to-water and 800 rpm mixing at $40^{\circ}C$ for 30 min. In recycling study, removal rates were measured using ten times recycled crosslinked ${\beta}$-CD in egg yolk, and 85% cholesterol removal was observed with eight times reuse. These results indicated that over 90% cholesterol was removed at 1:1 ratio of egg yolk-to-water, 20% crosslinked ${\beta}$-CD addition, and 30 min mixing with 600 rpm at $40^{\circ}C$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1175-1180
• /
• 2008

This study explored the compacition characteristics of organic weathered soils. Weathered soils were collected around the Gwangju University in Jinwol-dong, Gwangju city, and coal was used as organic material. Weathered soils were mixed with coal so that the ratio of organic elements against mixed soil can be 0%, 25%, 50%, and 75% respectively. Compaction tests were carried out on these organic mixture soils in different ratios of organic materials. And soap water instead of water in compaction tests was used. Through this study, We knew that the bigger the organic material ratio was, the more the optimum moisture content increased and the less the maximum dry unit weight reduced. In case of using small compaction energy, using soap water instead of water improved the compaction efficiency a little.