• 전기학회논문지
• /
• 제61권8호
• /
• pp.1153-1158
• /
• 2012

Niobium oxide ($Nb_2O_5$) has a strong chemical coherence and good electrical conductivity. Therefore, this material is helpful to enhance the performance of the dye sensitized solar cells (DSC) by improving the electron mobility. In this study, $Nb_2O_5$ was mixed with $TiO_2$ and this compound was applied to the DSC to improve its performance. As a result, the current density of the DSC using the $Nb_2O_5-TiO_2$ compound on the photoelectrode was increased, because the internal resistance concerned to the electron transfer in the photoelectrode of DSC was decreased. However, large amount of the $Nb_2O_5$ induces the decrease of the efficiency of the DSC because the surface area to attach dye molecules is decreased due to the large particle of $Nb_2O_5$. Therefore, it is important to optimize the mixture ratio of the $Nb_2O_5-TiO_2$ compound for maximizing the performance of the DSC. Finally, the most optimum performance of the DSC was shown in case of the $Nb_2O_5$ concentration of 10 wt% of the $Nb_2O_5-TiO_2$ compound.

• 자원리싸이클링
• /
• 제14권5호
• /
• pp.18-23
• /
• 2005

초산, 질산, 인산이 함유된 폐혼산으로부터 인산을 분리하여 재활용하기 위한 방법으로 용매추출법을 이용하였다. 폐혼산에서 초산과 질산을 선택적으로 분리하고, 추출 잔류액에서 인산을 회수하고자 하였다. 주요 실험 변수로는 추출제 농도, 교반시간, 교반속도 등의 변화에 따른 초산, 질산, 인산의 추출거동을 조사하였다. 또한, McCabe-Thiele diagram으로부터 초산, 질산 성분의 추출 및 탈거에 필요한 이론적 단수를 조사하였다. 실험결과 인산염계 추출제를 사용할 경우 초산과 질산을 선택적으로 분리 추출이 가능하였으며, 추출제의 함량은 유기상의 50%가 적합하였다. 교반속도와 교반시간의 영향은 크게 없었으며, 상비(A/O)=1/3, 6단에서 초산과 질산을 완전히 추출 분리하여 인산을 추출잔류액에서 회수가 가능하였다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.47-55
• /
• 2006

실리콘웨이퍼 제조공정에서 발생되는 초산, 불산 및 질산을 함유한 3성분계 폐혼산으로부터 각 산을 분리하여 무기산으로 재활용하기 위하여 용매추출법을 적용하였다. 이러한 산을 선택적으로 분리하기 위해 추출제로 초산의 경우는 EHA(2-Ethylhexlalcohol)를 사용 하였으며 질산과 불산의 경우에는 TBP(Tri -butlyphosphate)를 사용하여 추출과정과 탈거과정에 대한 공정설계를 위한 기초 실험을 실시하였다. 3성분계 페혼산에서 먼저 초산을 추출 분리하고, 추출여액중 질산 및 불산을 순차적으로 연속 분리 할 수 있는 공정개발을 위하여 McCabe-Thiele해석을 통해 최적 투입유량비(O/A), 소요단수(Stage) 등을 결정하였다. 분석 결과 혼산으로부터 초산의 회수율은 90%이상 이었으며 초산추출여액에서 질산의 회수율은 90%이상, 최종 추출잔류액에서 불산의 회수율은 67%이상 이었다.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.645-652
• /
• 2016

A membrane module including grid was designed and introduced to MBR (membrane bio-reactor) for the purpose of better control of membrane fouling. It could be anticipated that the grid enhances the shear force of fluid-air mixture into the membrane surface by even-distributing the fluid-air to the membrane module. As MLSS concentration, packing density which is expressed in the ratio of the housing and the cross-sectional area of membrane fibers ($A_m/A_t$) and air-flow rate were changed, membrane foulings were checked by monitoring fouling resistances. The total fouling resistance ($R_c+R_f$) without grid installation (i.e., control) was $2.13{\times}10^{12}m^{-1}$, whereas it was reduced to $1.69{\times}10^{12}m^{-1}$ after the grid was installed. Regardless of the grid installation, the $R_c+R_f$ increased as the packing density increased from 0.09 to 0.28, however, the increment of resistance for the grid installation was less than that of the control. Increase in the air flow rate did not always guarantee the reduction of fouling resistance, indicating that the higher air flow rate can partially de-flocculate the activated sludge flocs, which led to severer membrane fouling. Consequently, installation of grids inside the housing have brought a beneficial effect on membrane fouling and optimum air flow rate is important to keep the membrane lowering fouling.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.30-35
• /
• 2013

To conserve wood resources for papermaking, chemical compositions of the hemp (Cannabis sativa L.) bast fiber cultivated in Korea such as holocellulose, ${\alpha}$-cellulose, lignin, alcohol-benzene extractives, hot and cold water extractives, and ash contents were investigated to manufacture the specialty packaging paper effectively. Significantly very low klason lignin content of 3.3% was accomplished by removing of the outer shell of bark. Laboratory soda pulping method which is very useful for the nonwood fiber was adapted, and it was found that there was no significant difference in both kappa number and H-factor between 25% and 30% NaOH charge. Hemp pulp cooked with the laboratory digester in 25% NaOH at $170^{\circ}C$ were mixed together with the wood pulp(NBKP:LBKP=1:1) in order to find the optimum mixture ratio which exhibited acceptable paper strength properties such as tensile index, burst index, and tear strength. When 10% of hemp soda pulps was mixed with 90% of wood pulps comprised of SwBKP and HwBKP (1:1), all physical strength increased significantly. The physical strength decreased as the amount of hemp pulp increased because the cell wall of bast fiber is very thick which causes low conformability and low fiber-fiber bonding. These results showed that paper made of hemp-wood pulp can be used for the specialty packaging paper which requires both the characteristic surface properties and the high physical strength of hemp fiber.

• 멤브레인
• /
• 제13권2호
• /
• pp.73-80
• /
• 2003

폴리메틸펜텐 막(polymethylpentene membrane, PMP)을 Ar, NH_3$ 플라즈마로 표면 처리하고, 처리 전후의 투과 도와 선택도의 변화를 관찰하였다. Ar 플라즈마로 처리하였을 때 O/C의 비율이 증가하며 친수성기 (OH, COOH, C=O)의 도입이 확인되었고 $NH_3$ 플라즈마로 처리하였을 때 아민, 아미노기가 도입되었다. 플라즈마 처리된 폴리메틸펜텐막에서 $CO_2$의 투과도와 $N_2$,에 대한 선택도 (Actual Separation Factor)의 최적조건은 Ar 플라즈마 처리 (30 W-6 min)의 경우 각각 182 Barrer ［$10^{-10}\;cm^3(STP)cm/cm^2$.s.cmHg］와 6.17이며, $NH_3$, 플라즈마 처리 (30 W-8 min)의 경우 각각 144 Barrer [$10^{-10}/cm^2(STP)cm/cm^2$.s.cmHg] 와 6.13을 얻었다.

• 대한토목학회논문집
• /
• 제41권3호
• /
• pp.237-246
• /
• 2021

기후변화로 극한강우에 의해 발생하는 얕은 비탈면 붕괴와 침식으로 토석류 유발이 잦아지고 있다. 앵커나 네일링 공법으로 보강하기 보다는 원지반을 이용하여 식생이 되는 비탈면 보강이 경제적이면서 친환경적인 공법으로 연구되고 있다. 본 연구에서는 충분한 식생이 가능하도록 부엽토와 한약재 찌꺼기를 활용하여 토양개량제를 개발하였다. 그리고 표면침식을 방지하기 위해 첨가제로 마이크로 시멘트와 반수석고 등을 사용하여 전단강도를 증가시켰다. 이러한 주재료와 첨가제 결정은 실내시험을 통하여 강우로 인한 지반 표층의 침식 진행을 확인하여 전단강도의 증가를 확인할 수 있었다. 원지반을 활용하는 토양개량제의 보강은 식생이 가능하고 침식에 대해 저항력이 크게 증가한다. 이러한 보강은 사면 불안정성의 주요 원인인 인장균열 발생을 방지하고 침식에 의한 토석류 유발을 막을 수 있기 때문에 다른 공법들보다 장마철 폭우에 대한 대처방안으로 효율적인 방법이라고 판단된다.

• Geomechanics and Engineering
• /
• 제28권6호
• /
• pp.547-557
• /
• 2022

Dune sands are poorly graded collapsible soils lacking fines. This experimental study explored the technical feasibility of sustainable invigoration of fine waste materials to improve the geotechnical properties of dune sand. The fine waste considered in this study is fine marble waste. The fine waste powder was mixed with dune sand at different contents (5, 10,15, 20, 25, 50%), where the gradation, void ratio, compaction, and shear strength characteristics were assessed for each fine marble waste -dune sand blend. The geotechnical properties of the dune sand-fine marble waste mix delineated in this study reveal the enhancement in compaction and gradation characteristics of dune sand. According to the results, the binary mixture of dune sand with 20% of fine marble waste gives the highest maximum dry density and results in shear strength improvement. In addition, a numerical study is conducted for the practical application of the binary mix in the field and tested for an isolated shallow foundation. The elemental analysis of the fine marble waste confirms that the material is non-contaminated and can be employed for engineering applications. Furthermore, the numerical study elucidated that the shallow surface replacement of the site with the dune sand mixed with 20% fine marble waste gives optimal performance in terms of stress generation and settlement behavior of an isolated footing. For a sustainable mechanical performance of the fine marble waste mixed sand, an optimum dose of 20% fine marble waste is recommended, and some correlations are proposed. Thus, for improving dune sand's geotechnical characteristics, the addition of fine marble waste to the dune sand is an environment-friendly solution.

• Structural Engineering and Mechanics
• /
• 제82권3호
• /
• pp.295-312
• /
• 2022

This study investigates the effects of nano silica (NS) and micro steel fiber on the properties of ultra-high-performance concrete (UHPC). The experimental consists of three groups, each one with five percentages of NS content (0%, 2%, 4%, 6% and 8%) in addition to the 20% silica fume and 20% quartz powder proportioned according to the weight of cement added to the mixtures. In addition, three percentages of micro steel fibers (0%, 1% and 2%) were considered. Different mixtures with varying percentages of NS and micro steel fibers were prepared to set the water-to-binder ratio, such as 0.16% and 1.8% superplasticizer proportioned according the weight of the binder materials. The fresh properties, mechanical properties and elevated temperatures of the mixtures were calculated. Then, the results from the microstructure analyses were compared with that of the reference mixtureand it was found that 6% replacement of cement with NS was optimum replacement level. When the NS content was increased from 0% to 6%, the air content and permeability of the mixture decreased by 35% and 39%, the compressive and tensile strength improved by 21% and 18% and the flexural strength and modulus of elasticity increased by 20% and 11.5%, respectively. However, the effect of micro steel fibres on the compressive strength was inconclusive. The overall results indicate that micro steel fibres have the potential to improve the tensile strength, flexure strength and modulus of elasticity of the UHPC. The use of 6% NS together with 1% micro-steel fiber increased the concrete strength and reduce the cost of concrete mix.

• 한국축산식품학회지
• /
• 제44권1호
• /
• pp.146-164
• /
• 2024

Owing to the residual toxicity and adverse health effects of chemical preservatives, there is an increasing demand for using natural preservatives in food. Although many natural extracts have been evaluated, research on their antibacterial effects remains insufficient. Therefore, this study aimed to explore the possibility of developing Psidium guajava, Ecklonia cava, and Paeonia japonica (Makino) Miyabe & Takeda extracts as natural food preservatives. Further, the effect of mixing these extracts on microbial growth and quality was evaluated during the refrigeration of sausages. Optimal mixing ratios were determined based on the minimum inhibitory and bactericidal concentrations of each mixed extract against the Listeria monocytogenes, Salmonella spp. and Escherichia coli. D-optimal mixing design optimization tool was further used to obtain an optimum mixing ratio of Formulation 1 (F1). The antibacterial activity of F1 increased with increasing concentration, with similar activities at 0.5% and 1%. The sausages with synthetic or natural preservatives showed significantly lower lipid oxidation than those of the control and grapefruit extract-treated sausages after 4 wk of refrigeration. Total plate counts were observed only in the control and treatment groups stored for 3 wk, and no significant effect of ascorbic acid was observed. Compared to the other samples, sausages with added natural extracts showed the highest overall acceptability scores initially and after 4 wk. Therefore, similar amounts of grapefruit seed and natural extracts had the same effect on microbiological analysis and lipid rancidity during sausage storage. Hence, this mixture can serve as a potential natural preservative in meat products.