• 멤브레인
• /
• 제6권4호
• /
• pp.250-257
• /
• 1996

글루탈알데히드와 황산을 이용하여 가교된 키토산 복합막을 제조하였다. 제조된 복합막은 글루탈알데히드와 황산용액을 이용하여 표면말을 선택적으로 가교하엿다. 제조된 키토산 막에서의 키토산과 아세트산간의 착체형성의 영향을 관찰하기 위하여 수산화나트륨으로 중화하여 성능을 비교하였다. 황산으로 표면을 가교한 경우 코팅된 활성층의 투과증발에 대한 영향을 관찰하였다. 글루탈알데히드로 가교된 키토산복합막은 지지체의 종류를 변화시키면서 투과증발성능을 비교하였다. 지지체의 순수투과성능이 증가할수록 투과유량은 비슷한 값들을 유지하였으며, 선택도는 증가하다가 다시 감소하는 경향을 나타내었다. 수산화나트륨으로 키토산을 중화시킨 경우에는 선택도는 감소하였고 투과유량은 유지되는 경향을 나타내었다. 황산을 이용하여 표면을 이온가교시킨 경우 키토산 복합막은 활성충우ㅏ 두께가 증가할수록 가교시간이 증가하여야 최적의 가교조건을 나타내었다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E3호
• /
• pp.153-163
• /
• 2002

A laboratory- scale dual-column biofilter system was used to study the biofiltration of dimethyl disulfide (DMDS). The gas flow rate and DMDS concentration to the biofilter were varied to study their effect on the remov-al of dimethyl disulfide. Operating parameters such as pH, temperature, and water content were monitored during the biofilter operation and necessary precautions were taken to keep these parameters within the acceptable limits. It was observed that the removal efficiency of DMDS was optimal at neutral pH values. After five month op-eration, the neutralization of the filter beds with sodium carbonate became necessary for the optimum operation of the biofilters. The microbial population already present in the compost mixtures was found to be adequate in treat-ing DMDS. The compost mixtures were found to be similar in terms of biofiltration efficiency of DMDS. However, pressure drops observed in the first column compost mixture (compost/ peat mulch) was extremely high, making this compost economically not feasible. The second mixture (compost/bark) provided pressure drops within accept-able limits. A minimum residence time of 30 seconds at the optimal operating conditions appeared to be adequate for achieving high removal efficiencies (>90%).

• 화약ㆍ발파
• /
• 제24권2호
• /
• pp.9-22
• /
• 2006

길이가 대단히 짧은 터널을 제외하고는 터널을 시공하는 경우 일반적으로 인위적인 환기시스템이 필요하다. 특히 장대터널의 경우 굴착 진행에 따라 적절한 환기시스템을 조합해서 사용하는 것이 효과적이다. 터널 연장이 4,580m인 능동터널은 본래 송기식을 사용하는 것으로 설계를 했지만, 굴착이 진행됨에 따라 송기식만으로 환기하는 데에는 한계가 예상되어 별도의 방식 검토를 수행하였다. 굴착중 터널의 소요환기량을 산정하고 이 소요환기량과 선택가능한 여러 가지 경우의 환기조합방식을 사례볕로 구성한 뒤 환기량과 유동성을 해석하고 비교함으로써 경제적으로도 우수한 최적의 환기조합안을 도출하였다. 환기시스템을 결정하기 위하여 각 환기시스템에 대한 경제적 효율성 평가를 수행하였다.

• 태양에너지
• /
• 제11권1호
• /
• pp.78-86
• /
• 1991

내부에 삼각형 핀을 갖는 회전형 히트파이프의 작동유체로 물-에탈올 2성분 유체를 사용하였을때 Nusselt의 막응축이론을 기초로 하여 핀 및 그루브의 전열특성을 유한요소법에 의한 수치해석을 하였으며 또한 실험을 행하여 비교하였다. 히트파이프의 회전수가 증가할수록, 내부 증기압이 높을수록 전열량은 완만하게 증가하지만 에탄올 농도가 커 질수록 전열량은 감소하였다. 그리고 순수 에탄올만을 작동유체로 하는 경우는 증류수만을 작동유체로 하는 경우의 전열량의 $0.75{\sim}0.85$정도로 나타났다. 또한 에탄올 농도가 0. 2전후에서 전열효과 및 작동온도 범위 등이 가장 유리하게 나타났다.

• Advances in nano research
• /
• 제14권5호
• /
• pp.443-450
• /
• 2023

Carbon nanotubes (CNTs) have received increased interest in reinforcing research for polymer matrix composites due to their exceptional mechanical characteristics. Its high surface area/volume ratio and aspect ratio enable polymer-based composites to make the most of its features. This study focuses on the experimental tensile testing and fabrication of carbon nanotube reinforced composite (CNTRC) beams, exploring various micromechanical models. By examining the performance of these models alongside experimental results, the research aims to better understand and optimize the mechanical properties of CNTRC materials. Tensile properties of neat epoxy and 0.3%; 0.4% and 0.5% by CNT reinforced laminated single layer (0°/90°) carbon fiber composite beams were investigated. The composite plates were produced in accordance with ASTM D7264 standard. The tensile test was performed in order to see the mechanical properties of the composite beams. The results showed that the optimum amount of CNT was 0.3% based on the tensile capacity. The capacity was significantly reduced when 0.4% CNT was utilized. Moreover, the experimental results are compared with Finite Element Models using ABAQUS. Hashin Failure Criteria was utilized to predict the tensile capacity. Good conformance was observed between experimental and numerical models. More importantly is that Young' Moduli of the specimens is compared with the prediction Halpin-Tsai and Mixture-Rule. Although Halpin-Tsai can accurately predict the Young's Moduli of the specimens, the accuracy of Mixture-Rule was significantly low.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.355-360
• /
• 1990

One of the possible ways to make a flexible wire of high-Tc superconductiong ceramics is the extrusion of a mixture slurry of superconducting powder with an appropriate polymer binder. The fabrication procedure for $YBa_2Cu_3O_{7-{\delta}}$ superconducting coils with this plastic mass is described. The major factors limiting the formation of extruded wire are the binder content, powder size, and entrapped gas in the mixture slurries. The optimum content of binder for both good flexbility and strength of wire was estimated to be 30wt%. The finer the powder size is, the more homogeneous structure the extruded wire has. The vacuum degassing before extrusion was necessary to remove the entrapped gas in as-extruded wire. The formability of wire depends greatly on the wire radius and binder content. After burning out the binder and the successive sintering, the contacts between the superconducting grains could be made. The resistivity vs. temperature behavior measured in the final wire showed the transition temperature of 90K with narrow transition width. However, the critical current densities of these wires are much lower in comparison to those of conventional bulk specimens.

• 한국농공학회지
• /
• 제20권1호
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

• 한국건축시공학회지
• /
• 제13권3호
• /
• pp.282-290
• /
• 2013

본 연구는 혼화재의 다량 치환 시 배합 요인의 조정 범위를 검토하기 위한 목적으로 일반 콘크리트에서 혼화재 다량 치환 콘크리트로의 배합변경 데이터를 확보하고자 하였다. 실험결과를 요약하면, 일반 범용적 배합내에서 혼화재 다량 치환 콘크리트로 배합을 변경 시 적정 품질을 확보하기 위한 단위수량의 경우 $20{\sim}30kg/m^3$ 하향 조정, 잔골재율은 W/B 5 % 하향조정 시 약 1 %, 총 치환율 5 % 증가 시약 0.12 %로 중복 하향 조정, AE제는 FA 치환율 5 % 증가 시 컨벤셔널 대비 약 20~30 % 정도 상향 조정, W/B는 FA 및 BS의 치환율이 5 % 상향 시 W/B를 약 1~4 % 정도 하향 조정함으로써 콘크리트의 기본 물성을 확보할 수 있는 것으로 나타났다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.101-101
• /
• 2017

Beta-glucan is a polymerized polysaccharide on beta-1,3 chemical bonds. It has the main pharmacological action of various anticancer mushrooms and is colorless and odorless. In addition, it enhances phagocytosis of macrophages against mycobacterium tuberculosism and increases resistance of host against food poisoning bacteria. Owing to these advantages, beta-glucan was used in various health supplement foods such as immune boosters, hypotensive agent and hypoglycemic agent. Our study was aimed to investigate the effective components of beta-glucan, which was optimized via the contents of Sarcodon aspratus and rice bran. First, the mixture ratio condition of Sarcodon aspratus and rice bran were respectively 10:0, 7:3, 5:5, 3:7, and 0:10. The raw materials were fabricated using hot water extraction method. Distilled water of 100 mL was added to the raw material and extracted. After the extraction processed, the content of effective components was analyzed. The absorbance of beta-glucan was measured using a beta-glucan kit (Megazyme, (1-3) (1-4) BETA-D-GLUCAN ASSAY KIT). The absorbance analysis was repeated three times for accurate analysis. After the extracts were lyophilized, the yields of extracted raw materials according to the mixture ratio conditions of Sarcodon aspratus and rice bran (10:0, 7:3, 5:5, 3:7, and 0:10) were respectively 33.1%, 34.5%, 35.3%, 30.7%, and 24.3%. The absorbance was 1.52, 1.47, 1.50, 1.79, and 1.56, respectively. As a result, the optimum ratio of beta-glucan is 3:7 at Sarcodon aspratus and rice bran. This study suggested that the optimal amount of beta-glucan could be used as a health supplement foods and food additive such as immune boosters, hypotensive agent and hypoglycemic agent. However, the new condition (temperature, time) of hot water extraction to maximize the content of beta-glucan could be considered, could be necessary to compare with the existing extracts.

• 동력기계공학회지
• /
• 제10권3호
• /
• pp.5-10
• /
• 2006

In a conventional and lean operating engine, the state of mixture is very important in the combustion and emission characteristics. Lean operation is known to decrease the formation while maintaining a good fuel economy, but the unstable operation due to misfire and erratic combustion prevents engines from being operated at very lean mixtures, so both combustion rates and exhaust emission formation need to be satisfied comparably. In this study, it is designed and experimented the modified engine, and analyzed the combustion and exhaust emission according to the change of engine speed and with adding ozone. The conclusions were drawn out and enumerated as follows. 1. At the experimental result of automobile diesel engine, it has been verified that the formation of particulate matter(PM) gas is able to be lower with the addition of optimum quantities of ozone. 2. Carbon monoxide(CO) was formed by the lack of oxygen and the thermal dissociation in the combustion process. Therefore, with the change of swirl valve's position and addition of oxygen and ozone, CO formation was decreased by the increasing of excessive O2, but it was increased by the temperature of combustion gas growing higher. As a result of the two effects, CO formation was decreased in this study. 3. Hydrocarbon(HC) was formed by the lack of O2, and the flow of mixture in cylinder. According to opening of the swirl valve and adding the oxygen and ozone, hydrocarbon gas was decreased by 20%, 9%, and 27.5%, respectively. 4. Nitric oxides($NO_x$) was strongly affected by the combustion gas temperature. As a result of respectively experimental conditions, $NO_x$ formation was increased about 20% due to (be the) high(er) combustion gas temperature.