• 한국미생물·생명공학회지
• /
• 제27권6호
• /
• pp.466-470
• /
• 1999

Protease production and its characteristics were investigated with Mucor racemosus f. racemosus PDA 103 which was isolated from Korean traditional meju. Optimum culture conditions of the strain for the production of the protease in basic medium[bean(Baektae):H2O=1:1(w/v)] were as follows: pH 6, 3$0^{\circ}C$ and 72hrs. Optimum pH and temperature for the enzyme activity of the protease produced by Mucor racemosus f. racemosus were pH 5 and 5$0^{\circ}C$, respectively. The enzyme was relatively stable a pH2.0~5.0 and at temperature below 4$0^{\circ}C$. Phenylmethane-sulfonyl fluoride and Ag+ inhibited the enzyme activity. This indicates that the enzyme is serine protease. Km value was 0.9$\times$10-4M and Vmax value was 5.93$\mu\textrm{g}$/min. This enzyme hydrolyzed casein more rapidly than bovine albumin.

• 한국미생물·생명공학회지
• /
• 제23권6호
• /
• pp.747-754
• /
• 1995

E. coli growth is inhibited by organic acids produced in the broth. In order to reduce the inhibition, an electrodialysis unit was used. Model solutions (acetic acid plus distilled water or M-9 medium) were tested in the unit for investigating the optimum condition of current and voltage. Electrodialysis cultures were performed with the optimum condition where the highest current efficiency could be attained. The distilled water plus acetic acid gave us a higher current efficiency than the M-9 plus acetic acid. Electrodialysis efficiently removed acetic acid and so enhanced the specific growth rate of E. coli compared with the control experiment without clectrodialysis.

• 한국미생물·생명공학회지
• /
• 제23권5호
• /
• pp.602-608
• /
• 1995

The aim of the present research program was to construct an optimum fermentation system and to characterize the properties of cathepsin B inhibitor from Streptomyces chromofuscus SMF28. Glucose and casitone were proved to be good carbon source and nitrogen source, respectively. The production of inhibitor was high at lower concentration than 10 mM of inorganic phosphate. The optimum temperature and pH for the production of inhibitor were 30$\circ$C and pH 7, respectively. The production of inhibitor was related to mycelial growth and was affected by medium composition. The inhibitor in culture filtrate of S. chromofuscus SMF28 was purified by butanol extraction, silica gel chromatography, Amberlite IRC-50 (H$^{+}$ form) chromatography, preparative TLC, and preparative HPLC. From amino acid analysis and UV, IR, $^{1}$H-NMR spectroscopic analysis, the inhibitor was identified as a peptide containing valine and phenylalanine derivative.

• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.635-644
• /
• 1997

The paper reviews the implementation and evaluation of exact methods for the computation of transcendental structural eigenvalues, i.e., critical buckling loads and natural frequencies of undamped vibration, on multiple instruction, multiple data parallel computers with distributed memory. Coarse, medium and fine grain parallel methods are described with illustrative examples. The methods are compared and combined into hybrid methods whose performance can be predicted from that of the component methods individually. An indication is given of how performance indicators can be presented in a generic form rather than being specific to one particular parallel computer. Current extensions to permit parallel optimum design of structures are outlined.

• 식물병과 농업
• /
• 제5권1호
• /
• pp.55-57
• /
• 1999

Botrytis cinerea was isolated from a gray mo이 leaf lesion on persimmon in fields of Kyeonsangnam-do from 1996 to 1998, and etiological study was conducted including physiological characteristics. It formed gray mold lesion with light green color on leaves of persimmon (Diospyros kaki). The temperature range for mycelial growth was between $5^{\circ}C$ and $30^{\circ}C$ with the optimum temperatures of $20^{\circ}C$ to $25^{\circ}C$. Conidia were oviod, cylindric, and colorless and their dimensions in culture were $8.4~11.5\times7.0~8.9\mu\textrm{m}$. The optimum temperature of conidial germination was $25^{\circ}C$. Sclerotia on potato dextrose agar medium were well formed and brownish condiophores were observed with their size of $18.5~64.9\times4.5~8.0\mu\textrm{m}$. Symptoms on artificially inoculated plants were similar to those of gray mold disease on persimmon caused by Botrytis cinerea in fields.

• Journal of Photoscience
• /
• 제12권3호
• /
• pp.143-147
• /
• 2005

The simultaneous determination of harman, harmaline and norharman has been described using synchronous fluorescence technique. The method has been based on their natural fluorescence. It is difficult to analyze and determine their contents by conventional fluorescence method because of their similar molecular structures. The synchronous spectrum, maintaining a constant wavelength difference of ${\Delta}{\lambda}=185nm$ between the excitation and emission monochromators, was selected as optimum to perform the determination. The method was also performed in aqueous medium at pH 4.0 and in presence of sodium dodecyl sulfate (SDS), $1{\times}10^{-5}M$. Under the optimum conditions, each analyte has the linear determination range of $1{\times}10^{-7}M-\;1{\times}10^{-4}M$.

• Fisheries and Aquatic Sciences
• /
• 제6권1호
• /
• pp.1-6
• /
• 2003

A chitinolytic enzyme-producing bacterium was isolated from sea water on the coast of Busan. The bacterium was identified as Aeromonas sp. based on its morphological, cultural and biochemical characteristics and designated Aeromonas sp. J-5003. The strain produced two chitinoloytic enzymes: chitinase and chitobiase. The optimum culture conditions of the strain for production of chitinoloytic enzymes were investigated. For the production of chitinase, the major components of medium were colloidal chitin $0.5\%$, glucose $0.2\%$, yeast extract $0.25\%$ and peptone $0.25\%$ while for the production of chitobiase, they were colloidal chitin $0.5\%$, galactose and tryptone $0.2\%$. The optimum cultural temperature and initial pH for the production of chitinase and chitobiase were $30^{\circ}C$ and pH 7.0, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.136.2-136.2
• /
• 2011

A dynamic simulation study on SCR process in GTL process was carried out in order to find optimum operation conditions for pilot plant operation. Optimum operating conditions for SCR synthesis gas process were determined by changing operation variables such as feed temperature and pressure. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. The effect of temperature and pressure on synthesis gas process $H_2$/CO ratio were mainly examined. Dynamic simulation results were fed back to feed operation condition for optimizing productivity, especially for appropriate condition to FT (Fischer-Tropsch) synthesis unit.

• 공업화학
• /
• 제4권1호
• /
• pp.41-45
• /
• 1993

Rescently we are interested in the biosurfactant. Biosurfactant have a low toxcity and easily biodegradable compound. Pseudomonas sp. 13 was isolated from soil. This microorganism produced biosurfactant that consists of glycolipid R-1 and R-2. A time course study of fermentation indicated that the appearance of glycolipid in the fermentation broth the commencement of the stationary phase with the respect to biomass. The effect of variation of the media components such as amount of glucose, nitrogen, phosphate and metal ions has been investigated. The following values found to be optimum for biosurfactant production (glucose, $20g/{\ell}$; carbon to nitrogen ratio, 40; carbon to phosphate, 18; $FeSO_4{\cdot}7H_2O\;20mg/{\ell}$).

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2015년도 추계학술대회
• /
• pp.25-28
• /
• 2015

Aircraft conceptual design usually uses low to medium fidelity analysis to determine the basic configuration of an aircraft. Optimum solution is bounded by at least one of the constraints in most cases. This solution has risk to fail at later stage when analyzed with more sophisticated analysis tools. This research uses pre-constructed database to estimate the analysis prediction errors associated with simplified analysis methods. A possibility based design optimization framework is developed to utilize the newly proposed piecewise-linear fuzzy membership functions that compensate the discrepancies caused by simplified analysis. The proposed approach for aircraft design produces the optimum aircraft configurations that are less likely to fall into infeasible region when analyzed using higher fidelity analysis at later design stages.