• 한국염색가공학회지
• /
• 제6권4호
• /
• pp.62-71
• /
• 1994

The weighting increase varies with the condition of tannin-weight process and effects dyeability and physical properties of silk. The purpose of this study is to investigate the optimum condition of tannin-weighting process of silk and the effect of tannin-weighting process on dyeability and properties of silk. The methods of this study are first to examine the change according to the variables such as, weight increase of silk, temperature(30, 50, 70, 80, 9$0^{\circ}C$), time(30, 60, 120, 180, 240, 300min), tannin concentration(3, 5, 10, 20, 30g/l) in order to present the optimum condition, sencond to examine the change of the properties such as surface morphology, strength, elongation, mechanical values, dyeing condition, Basic and Acid dye absorption on silk which are tannin-weight processed in the optimum condition.

• 연구논문집
• /
• 통권29호
• /
• pp.185-194
• /
• 1999

The shape and thickness distribution according to the pressure-time curve were carried out using the FEM and experiment. Also, mechanical properties were investigated. The square cup parts have been formed with pressure-time curve generated by result of analysis. The tensile strength and elongation have been investigated according to applied pressure conditions using the tensile test specimen obtained from the superplastic formed cup. We can use to predict the shape of formed part under the applied pressure using the FEM analysis. In the case of optimum pressure condition, the thickness distribution and mechanical properties were improved. From this study, we can find the important of optimum pressure-time condition. We have investigated about the forming of airplane part and fuel tank for motorcycle. If the applied load used in boundary conditions was appropriate, the simulation result coincides with the formed part. However, it is very difficult to define the pressure condition in complicated shape. Thus, it is need to develop the optimum pressure condition for superplastic forming.

• 소성∙가공
• /
• 제16권1호
• /
• pp.54-60
• /
• 2007

Optimum injection molding condition for a box mold was searched by the Response Surface Analysis(RSA) with the aid of process monitoring system(PMS). Process variables on the control panel of the injection molding machine such as barrel temperatures, screw speed profile, holding pressures, etc. cannot guarantee the uniformity of the material variables directly related with the state of the product in the mold cavity. In order to make sure the state of the resin in the cavity, pressures and temperatures in the cavity, runner and nozzle were monitored in the experiment with the PMS. To accomplish the consistency of the molding process, dependent variables such as the switchover point and holding time were searched with the PMS. With a proper objective function about deflection of the box-type product, the optimum injection molding condition was obtained.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.37-43
• /
• 2008

Working condition is one of the most important factors in precision working. In this study, we optimized the vibration acceleration level(VAL) of Al 2024 alloy to select optimum working condition of side wall end-milling using RSM(Response Surface Methodology). RSM was well adapted to make analytic model for minimizing vibration acceleration, created the objective function and saved a great deal of computational time. Therefore, it is expected that the proposed optimization procedure using RSM can be easily utilized to solve the optimization problem of working condition. The experimental results of the surface roughness and VAL showed the validity of the proposed working condition of side wall end-milling as it can be observed.

• Applied Biological Chemistry
• /
• 제49권4호
• /
• pp.266-269
• /
• 2006

송이버섯 균사체의 biomass를 위한 최적조건을 규명한 결과, 균사체 spot배양을 위한 최적 조건은 MMN배지를 사용하여 pH 5.5에서 탄소원으로 현미를 3% 첨가 하여 $24^{\circ}C$에서 35일 배양 시 최적인 것으로 판단하였으며, 송이버섯 균사체 Biomass를 위한 bioreactor의 배양 최적조건은 PDMP배지를 사용하여 $18^{\circ}C$에서 60일 배양 시 reactor의 반응은 최적의 상태를 나타낼 수 있을 것이라 판단되었다.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.1-6
• /
• 2008

In recent years, developments in the semiconductor and electronic industries have brought a rapid increase in the use of large size silicon wafer. For further improvement of the ultra precision surface and flatness of Si wafer necessary to high density ULSI, it is known that polishing is very important. However, most of these investigation was experiment less than 300mm diameter. Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This study reports the machining variables that has major influence on the characteristic of wafer polishing. It was adapted to polishing pressure, machining speed, and the slurry mix ratio, the optimum condition is selected by ultra precision wafer polishing using load cell and infrared temperature sensor. The optimum machining condition is selected a result data that use a pressure and table speed data. By using optimum condition, it achieves a ultra precision mirror like surface.

• Applied Biological Chemistry
• /
• 제50권1호
• /
• pp.1-5
• /
• 2007

새송이버섯의 biomass를 위한 최적조건을 규명한 결과, 균사체 spot 배양을 위한 최적 조건은 PDA배지를 사용하여 24$^{\circ}C$에서 18일 배양 시 최적인 것으로 판단하였으며, 새송이버섯 균사체 Biomass를 위한 bioreactor의 배양 최적조건은 PDMP배지를 사용하여 pH 5.5, 18$^{\circ}C$에서 27일 배양시 reactor의 반응은 최적의 상태를 나타낼 수 있을 것이라 판단되었다. 최적조건에서 bioreactor를 이용한 새송이버섯 균사체의 인공적인 대량 배양이 가능하였으며, bioreactor에서 대량 인공 배양된 균사체를 이용한 새송이버섯 재배 시, 자실체가 형성되어 새송이버섯의 대량생산을 위한 biomass가 가능하였다.

• 한국농공학회지
• /
• 제16권4호
• /
• pp.3600-3610
• /
• 1974

Experimental work of batch-type dryer was conducted to develop its optimurm operating conditions by analyzing the major factors which affect the drying performance. A laboratory batch-type dryer was constructed and tested for various levels of heated-air rates, and depths of grain deposit. Tong-il rice variety having the initial moisture content of approximaely 23 per cent in wet basis was used for the experiment. The criteria selected for establishing the optimum operating condition were the drying performance rate, the thermal efficiency, and the operational cost of the dryer. The results of the study are summarized as follows: 1. The performance rate of dryer for a specific operating condition was defined as total amount of material dried per hour when the moisture content of grains in the upperlayer reaches to 16 per cent in wet basis. The optimum operating conditions as viewed in the rate of drying performance could be justified by functional realtionship between the depth of grain deposit and air flow rate. In other words, there was a definite depth of grain deposit for a given air-rate which make the dryer performance maximum. The optimum grain depth for the batch-type dryer with 3.3㎡ loading area and with the attached axial fan was about 35cm. 2. The thermal efficiency for the dryer was evaluated by the ratio of the latent heat required to evaporate the grain moisture to the heat input required to raise the ambient air-temperature to 40 degree centigrade. The optimum operating condition as viewed in term of thermal efficiency analyzed was that grater depth and lower air flow-rate may be desirable. This condition is contracted with the optimum condition as viewed by the dryer performance rate. 3. The annual operating cost of batch-type dryer was analyzed for different annual hour of use and for different operation condition. The optimum condition as viewed in terms of operating cost was almost identical to one as viewed in terms of dryer performance rate. Therefore, the most economical use of batch-type dryer for the same annual operating hours can be obtained when the dryer operated in the condition of maximum dryer performance rate. Increasing the annual operating hour may be desirable to cut down the dryer operation cost, since the annual hour of dryer use is much sensitive to the operating cost than any peractical conditions of dryer operation. 4. The most desirable operational condition as justified by combining all the criteria, dryer performance rate, thermal efficiency and annual operating cost, could be concluded to operate the dryer in the condition of maximum performance rate. The condition in general is identical to the lowest operation cost for a given annual operating hour.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.179-181
• /
• 1997

When grown the oxide single crystal including Li-ion, optimum oxygen condition is needed. Color and crack are caused in single crystal according too the change in the condition of the oxygen. LiTaO₃ crystals grown from off-composition of congruent melt composition under oxygen deficieny condition didn't generate any crack. LiNbO₃. LiTaO₃ crystals grown from congruent melt composition under optimum oxygen condition caused pale yellow color or colorless with no crack. Color gradually became colorless and generated cracks according to Oxygen excess.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.158-163
• /
• 2001

This study is the selection of optimum forming condition for RP system using ADS. Program using ADS reduces the required time for feedback between design and manufacturing of workpiece. When we produce rapid prototype using RP system, we investigate the relationship between Facetres in system variable number of AutoCAD and roundness of rapid prototype, and we will find optimum forming condition in RP system.