• The International Journal of Costume Culture
• /
• 제8권1호
• /
• pp.23-31
• /
• 2005

Mechanical properties and hand evaluation of wool/acrylic(W/A) blend knits were conducted before and after repeated washing to get the optimum W/A blending ratio, which could help achieve the optimum mechanical and hand properties of the knits. The five test fabrics using the yarns with different W/A blending ratios($\%$), 100/0, 70/30, 50/50, 30/70, 0/100, were knitted. The fabrics were washed by a rotating drum type washing machine. Then, objective mechanical and hand properties were evaluated by KES-FB, Kawabata evalution system for fabric. The results are as follows: there was no change in the hand value of the knitted fabric with the W/A-blended yarn caused by the change in the blending ratio before washing. After washing, however, the increase of acrylic's blending rate caused the bending property to decrease proportionally, while the friction coefficient of the surface property increased. Furthermore, the study showed that W/A 50/50 possesses the most superior tensile property and shearing property, which could attain the optimum blending ratio. Similar results in hand value were derived in all the samples. After washing, however, the increase in acrylic's blending rate caused a proportional decrease in KOSHI and an increase in FUKURAMI. In addition, W/A 50/50 gained the biggest NUMERI value, again corresponding to the optimum blending ratio. Similar results in total hand value were derived in all the samples before washing. After washing, though, all the total hand values decreased, and, as the wool fabric's blending rate increased, the total hand values proportionally decreased further.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.13-18
• /
• 2005

PLA/LPCL/HPCL blend fibers composed of poly (lactic acid) (PLA), low molecular weight poly ($\varepsilon$-caprolactone) (LPCL), and high molecular weight poly ($\varepsilon$-caprolactone) (HPCL) were prepared by melt blending and spinning for bioab­sorbable filament sutures. The effects of blending time and blend composition on the X-ray diffraction patterns and tensile properties of PLA/LPCL/HPCL blend fibers were characterized by WAXD and UTM. In addition, the effect of in vitro degra­dation on the weight loss and tensile properties of the blend fibers hydrolyzed during immersion in a phosphate buffer solu­tion at pH 7.4 and 37$^{\circ}C$ for 1-8 weeks was investigated. The peak intensities of PLA/LPCL/HPCL blend fibers in X-ray diffraction patterns decreased with an increase of blending time and LPCL contents in the blend fibers. The weight loss of PLA/LPCL/HPCL blend fibers increased with an increase of blending time, LPCL contents, and hydrolysis time while the tensile strength and modulus of the blend fibers decreased. The tensile strength and modulus of the blend fibers were also found to be increased with an increase of HPCL contents in the blend fibers. The optimum conditions to prepare PLA/LPCL/HPCL blend fibers for bioabsorbable sutures are LPCL contents of $5 wt\%, HPCL contents of $35 wt\%, and blending time of 30 min. The strength retention of the PLA/LPCL/HPCL blend fiber prepared under optimum conditions was about $93.5\% even at hydrolysis time of 2 weeks.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.656-660
• /
• 2000

In general, the silo blender is composed of silo, blending cone and vane. This study is to develop the blending system for resin of industrial materials produced in the chemical plant By examining closely the How states at the six flow zones of different geometry in the blender due to the gravity of resin, it is possible to develop the silo blender by the optimum design through the sin and the capacity change.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.90-97
• /
• 1993

1. Average moisture content of tobacco in BIB silo was about 19: 1% until 4hours conditioned time, and then moisture variation of tobacco after 2hr conditioned was very small. 2. Application of mathematical model for ordering system. 1) The constant K in the exponential equation varies inversely with both relative humidity and equilibrium moisture. 2) Time needed to order blending tobacco leaves with standard moisture from bulking and blending silo was 4 hours. 3) Reconstituted tobacco sheet had higher moisture absorption ratio than Oriental and Burley tobacco. 4) For minimize of conditioning time in BIB silo, the values of K and Mo given in this study can be used in equation(1) to calculate moisture absorption ratio and optimum conditioning time. 3. Average moisture content and water activity of conditioned tobacco for 4 hours in BIB silo was about 20% and 0.65. In this condition. microbial life will inhibite 4. Physical properties of conditioned tobacco in bulking and blending silo for 4hours was virtually no change.

• 한국식품조리과학회지
• /
• 제15권3호
• /
• pp.238-243
• /
• 1999

보리로부터 전분을 분리하는 공정을 개발하기 위해 blending 처리, ${eta}$-glucanase 처리 및 alkali 처리를 병행한 최적조건을 검토하였다. Blending 처리에 의한 전처리 효과를 조사한 결과 blending 처리를 6회 했을 경우에 전분수율이 29.7%로 나타냈으며 단백질 3.2%, 지방0.7%, 섬유소 0.4%, 회분 0.4%, ${eta}$-glucan 2.8%를 함유한 전분을 분리하였다 단백질과 ${eta}$-glucan의 용출효과를 조사하기 위해 $eta$-glucanase 처리의 최적조건을 검토한 결과 ${eta}$-glucanase 첨가량 60,000 unit, 맥분과 물의 양1/2, 반응온도 $45^{\circ}C$, pH6.5, 침지 6시간 때에 효과적인 용출을 보였다. 전분의 수율증대와 순도를 높이기 위해 0.2% NaOH 용액을 사용한 alkali 처리조건을 조사한 결과 침지 2시간 때에 전분함량은 ${eta}$-glucanase 처리 후의 전분함량과 비교하여 볼 때 25%가 증가한 76.7%(w/w)로 나타났으며 단백질 0.2%, ${eta}$-glucan 0.1%의 최종 전분을 분리하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.784-787
• /
• 2007

A process flowsheet simulation model based on ASPEN PLUS was developed to investigate the effect of co-gasification of coal and rice husk on the gasifier performance and pollutant emissions in IGCC power plant. The analyses were done for an 02-blown, pulverized gasifier using coal and rice husk as feedstock, parameter employed the blending ratio of rice husk in coal were investigated. From the simulation results, it was found that gaseous pollutant emissions were reduced substantially with the increase of the blending ratio of rice husk. An optimum range between 15% and 25% rice husk-to-coal ratio was found to be the optimum point in terms of gaseous pollutant emission per energy output for sui fur and nitrogen compounds.

• 한국축산시설환경학회지
• /
• 제3권1호
• /
• pp.27-34
• /
• 1997

This study was carried out to evaluate the feasibility of composting of swine manure with wood chips as a bulking agent. To evaluate the optimum blending ratio of wood chip to swine manure three levels of wood chip such as 100, 150, and 200% were blended on a volume basis with 100% of swine manure was used to determine the effect of wood chip compared with sawdust as a bulking agent on composting. The maximum temperature reached during composting was 70, 58, 48, 72$^{\circ}C$ at blending ratio of 100, 150, 200, and 50WC+50SD%, respectively. The bulk density of compost was increased extremely with increasing the blending level of wood chip. The C/N ratio of final compost ranged from 18.25 to 19.82 . Heavy metal contents in the final compost were in the range of 0.05∼0.16 mg/kg, 5,86∼10.95 $\mu\textrm{g}$/kg, and 295∼440 mg/kg for Cd, Hg, and Cu, respectively. It was concluded that the blending ratio of 200:100 of wood chip and manure by volume was satisfactory for swine manure composting.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.264-269
• /
• 2004

The present paper deals with improvement in disperse dyeablility as well as imparting of cationic dyeablility to difficultly dyeable polypropylene by a melt blending technique. Isotactic polypropylene (PP) was blended with fibre grade polybutylene terephthalate (PBT), cationic dyeable polyethylene terephthalate (CDPET) and polystyrene (PS), individually. The resulting binary blends were spun and drawn into fibres at draw ratio 2, 2.5, and 3. The compatibility of blends, structural changes of fibres in terms of X-ray crystallinity, relative crystallinity, sonic modulus, birefringence and thermal stability were examined. The blended fibres were found to be disperse dyeable by the conventional method of high temperature and high pressure dyeing. And this dye ability increased with increase in the level of substitution. PP/CDPET blend also exhibited dyeablility with cationic dyes in addition to that with disperse dyes. The optimum level of blending was predicted keeping in view of tenacity and thermal stability of melt blend fibres. The wash fastness properties of the dyed fibres were found to be of high rate.

• 접착 및 계면
• /
• 제1권1호
• /
• pp.30-37
• /
• 2000

고무-섬유로 이루어진 고무복합체 제조공정을 단순화하기 위한 직접블렌딩 기술을 본 연구에서 제시하였다. 직접블렌딩 방법은 레소시놀, 헥사메틸테트라민, NaOH로 이루어진 결합체를 고무혼합물 배합공정에 직접 혼합하여 보강섬율의 접착제 처리공정을 생략할 수 있는 방법이다. 이러한 직접블렌딩 메커니즘을 규명하기 위해 결합체를 직접 고무혼합물에 블렌딩한 경우와(Case I) 결합체를 수용액 상에서 반응시켜 경화물을 얻은 후 이를 분쇄하여 고무혼합물에 배합하는 경우를(Case II) 비교하였다. 모폴로지 분석결과에 의하면 Case II의 경우 결합체와 매트릭스 고무 사이에 뚜렷한 계면이 발생하였지만, Case I의 경우 적절한 가공조건 아래서 결합제와 매트릭스 고무 사이의 반응에 의해 새로운 상이 생성됨을 알 수 있었다. 또한, SBR-나일론 고무복합체의 최적 성능을 위한 결합제의 최적 조성은 레소시놀과 헥사메틸렌테트라민의 mole비가 1.2:1인, 즉 레소시놀과 포름알데히드의 mole비가 1:5인 조성이었다.

• 한국환경과학회지
• /
• 제11권9호
• /
• pp.955-960
• /
• 2002

The recycled washwater, which has different water quality and is produced about 5 to 20% of the total water volume treated, affects the unit operation of water treatment, especially coagulation process. However, the effects of recycled washwater on unit operation of water treatment have not been fully investigated. In this study, effects of recycled washwater on coagulation process were investigated to find the optimum coagulation condition by analyzing turbidity, $UV_{254}$, TOC removal efficiencies. In addition, effects of recycled washwater on residual Al after coagulation were studied by analyzing soluble and particulate Al. The size distribution and fractal dimension of coagulated also analyzed. The recycled washwater was lower pH than the raw water. And the recycled washwater had higher $UV_{254}$, TOC and residual Al concentration than the raw water. Residual Al concentration of recycled washwater was about 50 times higher than that of raw water. Optimum coagulant dosages on the blending recycled washwater and the raw water for turbidity, $UV_{254}$ and Al removal were lower than that on the raw water. However, TOC removal increased by increasing coagulant dosage. The size and fractal dimension of coagulated particle produced in the blending recycled washwater were larger, which imply faster settling velocity, than those produced in the raw water only.