• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.944-951
• /
• 2011

An improved cholesterol analysis method was developed for powdered infant formula by gas chromatographic separation after liquid-liquid extraction and partition. In the official Korea Food Standard method for cholesterol analysis, the water phase and solvent phase were not well separated in the case of emulsified foods such as powdered infant formulas and baby foods. For the rapid and simple sample preparation method, an optimized direct saponification condition was established for heating temperature, heating time, and KOH concentration. From the results, the optimum conditions were as follows: heating temperature $90^{\circ}C$, heating time 60 min, and 16 M KOH 10 mL for a 2 g infant formula sample; improved separation condition for gas chromatography was as follows: the initial oven condition was $250^{\circ}C$ for 25 min, the oven temperature was increased to $290^{\circ}C$ by $10^{\circ}C$/min ratio, and finally the oven temperature remained at $290^{\circ}C$for 9 min. The developed method could be implemented for the study of cholesterol, providing the advantages of reduced inspection time and cost in emulsified foods such as infant formula.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.21-28
• /
• 2017

Practical models for FPGA architectures which include performance- and/or density-enhancing components such as carry chains, wide function multiplexers, and memory/multiplier blocks are being applied to academic FPGA placement tools which used to rely on simple imaginary models. Previously the techniques such as pre-packing and multi-layer density analysis are proposed to remedy issues related to such practical models, and the wire length is effectively minimized during initial analytic placement. Since timing should be optimized rather than wire length, most previous work takes into account the timing constraints. However, instead of the initial analytic placement, the timing-driven techniques are mostly applied to subsequent steps such as placement legalization and iterative improvement. This paper incorporates the timing driven techniques, which check if the placement meets the timing constraints given in the standard SDC format, and minimize the detected violations, with the existing analytic placer which implements pre-packing and multi-layer density analysis. First of all, a static timing analyzer has been used to check the timing of the wire-length minimized placement results. In order to minimize the detected violations, a function to minimize the largest arrival time at end points is added to the objective function of the analytic placer. Since each clock has a different period, the function is proposed to be evaluated for each clock, and added to the objective function. Since this function can unnecessarily reduce the unviolated paths, a new function which calculates and minimizes the largest negative slack at end points is also proposed, and compared. Since the existing legalization which is non-timing driven is used before the timing analysis, any improvement on timing is entirely due to the functions added to the objective function. The experiments on twelve industrial examples show that the minimum arrival time function improves the worst negative slack by 15% on average whereas the minimum worst negative slack function improves the negative slacks by additional 6% on average.

• The Korean Journal of Emergency Medical Services
• /
• v.9 no.2
• /
• pp.111-128
• /
• 2005

Background: Cardiac arrest is one of the most critical diseases which can likely lead to severe cerebral disability or brain death when the cases can not recover their circulation within 10 minutes. Saving out-of-hospital cardiac arrest cases is a recent concern in Korea. Resuscitation has become an important multidisciplinary branch of medicine, demanding a spectrum of skills and attracting a plethora of specialities and organizations. The best survival can be achieved if all the following links have been optimized : rapid access, and early CPR, defibrillation and ACLS, Since the "Utstein Style" was advocated in 1991, many reports about out-of-hospital cardiac arrest have been published based on this guideline. These differences prevent valid inter-hospital and international comparisons. However, it is not known how effective resuscitation has become to the patients. In other words, there are no guidelines for reviewing, reporting, and conducting research on resuscitation in Korea. This dissertation aims to provide the basic data for a unified reporting guideline of resuscitation in Korea and evaluating the out-of-hospital factors associated with survival discharge of out-of-hospital cardiac arrest. Methods: As for this study, uses the collected data about Out-of-hospital cardiac arrests at 4 area, from January, 2005 to April. 2005. With a retrospective study, 174 cases were analyzed. The data was recorded based on the Out-of-Hospital Utstein Style. Results: Resuscitation was performed on 174 out-of-hospital cardiac arrest cases at the 4 area 14 patients(8.1%) recovered their spontaneous circulation. Overall, the ROSC of the out-of-hospital cardiac arrest patients was 8.1%, which was poorer than that of western countries. Gender distribution was 50 females(28.7%) and 124 males(71.3%), approximately twice as many males as females. ROSC of witnessed arrests was found out to be 97.7%. The ratio of the witnessed arrest groups showed higher results than that of unwitnessed arrest groups in the above-examined cases. Cardiac etiology consisted of cardiac(33.5%), non-cardiac(45.7%), trauma(20.1%), and unknown(6.0%). Cardiac was the best performance. Initial rhythm showed Ventricular Tachycardia/pulseless Ventricular Fibrillation in 8 patients(6.0%), asystole in 100(75.2%) and unknown in 25(18.8%). The results of the Ventricular Tachycardia/pulseless Ventricular Fibrillation showed higher results than the others cases, The proportion of the cardiogenic cause was 33.5%, which was only half of western countries. Ventricular Tachycardia/pulseless Ventricular Fibrillation is relatively rare. These differences were due to the prevalent pattern of Out-of-hospital cardiac arrest as well as prematurity of the EMSS. Bystander CPR was practiced on 13 patients(7.52%). ROSC was shown in 46.2% cases. CPR by EMT was carried out on 167 cases(96.5%). ACLS by EMf was rare. From collapse, 4 cases(2.6%) arrived to ED within 6 minutes. 13 (8.6%) within 10 minutes, and 49(32.5%) over 31 minutes. The sooner the patients arrived, the greater the ratio of ROSC and discharged alive became, and the same with collapse time to ROSC. As the results of the logistic regression analysis, ROSC was found out to be highly influenced by the time of ED arrival from collapse and Ventricular Tachycardia/pulseless Ventricular Fibrillation. Therefore, the ratio of ROSC depends on not any single factor but various intervention factors. Conclusion: This dissertation presents the following suggestions and directions of the study hereafter. First, the first step for a chain of survival should be taken to activate EMSS early with a phone as soon as cardiac arrests are witnessed. Second, it is keenly needed that emergency medical technicians should be increased through emergency education for living. Third, it is necessary to establish the emergency transportation system. Fourth, most of the Koreans have little understanding of EMT and the present operation systems have many problems, which should be fundamentally changed. Fifth, it is required to have an active medical control over Out-of-hospital CPR, And proper psychological supports should be given not only to patients themselves and their family but also individuals who are engaged in emergency situation. Finally, through studies hereafter on nationwide, comprehensive, and standard forms, it is needed to examine into the biological figures of human body, causes and trends of cardiac arrests, and then, to enhance the survival rate of Out-of-hospital cardiac arrests. Korean guidelines for Cardiopulmonary resuscitation need to be made.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.309-314
• /
• 1999

In order to produce high concentration of sodium gluconate, optimization of the fermentation conditions, such as glucose concentration, inoculum size, dissolved oxygen concentration and glucose feeding method, was examined. When the glucose concentration was maintained in the range of 30∼50 g/L during the batch fermentation, glucose conversion yield and productivity were 92.2% and 6.0 g/L/hr, respectively. In the case of the low concentration below 30 g/L, the yield decreased by about 25%. As the inoculum size increased above 20%(w/v), lag phase was shortened but the productivity decreased. The dissolved oxygen level of 60∼70% was shown to be the threshold point for 75% of increase in the productivity of sodium gluconate. Finally, optimal glucose feeding rate was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and on the oxygen uptake rate and etc. Our result shows that glucose feeding, based on the oxygen uptake rate is a very simple, efficient and robust method, especially when oxygen is consumed as a substrate for the bioconversion. Using the above glucose feeding strategy under the optimized condition, 255 g/L of sodium gluconate concentration, 12 g/L/hr of productivity and 95% of glucose conversion yield were achieved with A. niger ACM53.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.443-454
• /
• 2008

Statement of problem: A clinically successful color match is one of the important factor to get an esthetic dental restoration. Dental shade guides are commonly used to evaluate tooth color in restorative procedure. But numerous reports have indicated that common shade guides do not provide sufficient spectral coverage of the natural tooth colors. To address issues associated with the shade guide, distinct avenues have been pursued objective spectrophotometric / colorimetric assessment. Purpose: This study compared the accuracy of tooth color selection of spectrophotometer with that of human visual determination. Three main factors were investigated, namely, the effect of light, the individual variation and the experience of the observer. Material and methods: At the first experiment, on ten patients, one operator independently selected the best matching shade to the unrestored maxillary central incisor, using a Vita Classical Shade Guide in the morning, at noon and in the afternoon. The same teeth were measured by means of a reflectance spectrophotometer. At the second experiment, on ten patients, ten operators (5 experts, 5 novices) selected and measured by the same method above at noon. At the third experiment, the results of the second experiment were divided into two groups, expert and novice, and analyzed. Results: 1. There was significant difference between visual and spectrophotometric assessment (mean ${\Delta}E$ values) in experiment 1, 2, 3 (P < .05). 2. There was no significant difference between experts and novices group, when comparing with each visual and spectrophotometric assessment (mean ${\Delta}E$ values). Conclusion: Spectrophotometer could be used to analyze the shade of natural tooth objectively. Thereby, this method offers the potential tominimize considerably the need for corrections or even remakesafter intraoral try-in of restoration. Furthermore, to achieve its advantage, both the shade-matching environment and communication between dentist and technician should be optimized with use of visual and instrumental shade-matching systems.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.117-137
• /
• 2009

Recently, intelligent traffic information systems have enabled people to forecast traffic conditions before hitting the road. These convenient systems operate on the basis of data reflecting current road and traffic conditions as well as distance-based data between locations. Thanks to the rapid development of ubiquitous computing, tremendous context data have become readily available making vehicle route planning easier than ever. Previous research in relation to optimization of vehicle route planning merely focused on finding the optimal distance between locations. Contexts reflecting the road and traffic conditions were then not seriously treated as a way to resolve the optimal routing problems based on distance-based route planning, because this kind of information does not have much significant impact on traffic routing until a a complex traffic situation arises. Further, it was also not easy to take into full account the traffic contexts for resolving optimal routing problems because predicting the dynamic traffic situations was regarded a daunting task. However, with rapid increase in traffic complexity the importance of developing contexts reflecting data related to moving costs has emerged. Hence, this research proposes a framework designed to resolve an optimal route planning problem by taking full account of additional moving cost such as road traffic cost and weather cost, among others. Recent technological development particularly in the ubiquitous computing environment has facilitated the collection of such data. This framework is based on the contexts of time, traffic, and environment, which addresses the following issues. First, we clarify and classify the diverse contexts that affect a vehicle's velocity and estimates the optimization of moving cost based on dynamic programming that accounts for the context cost according to the variance of contexts. Second, the velocity reduction rate is applied to find the optimal route (shortest path) using the context data on the current traffic condition. The velocity reduction rate infers to the degree of possible velocity including moving vehicles' considerable road and traffic contexts, indicating the statistical or experimental data. Knowledge generated in this papercan be referenced by several organizations which deal with road and traffic data. Third, in experimentation, we evaluate the effectiveness of the proposed context-based optimal route (shortest path) between locations by comparing it to the previously used distance-based shortest path. A vehicles' optimal route might change due to its diverse velocity caused by unexpected but potential dynamic situations depending on the road condition. This study includes such context variables as 'road congestion', 'work', 'accident', and 'weather' which can alter the traffic condition. The contexts can affect moving vehicle's velocity on the road. Since these context variables except for 'weather' are related to road conditions, relevant data were provided by the Korea Expressway Corporation. The 'weather'-related data were attained from the Korea Meteorological Administration. The aware contexts are classified contexts causing reduction of vehicles' velocity which determines the velocity reduction rate. To find the optimal route (shortest path), we introduced the velocity reduction rate in the context for calculating a vehicle's velocity reflecting composite contexts when one event synchronizes with another. We then proposed a context-based optimal route (shortest path) algorithm based on the dynamic programming. The algorithm is composed of three steps. In the first initialization step, departure and destination locations are given, and the path step is initialized as 0. In the second step, moving costs including composite contexts into account between locations on path are estimated using the velocity reduction rate by context as increasing path steps. In the third step, the optimal route (shortest path) is retrieved through back-tracking. In the provided research model, we designed a framework to account for context awareness, moving cost estimation (taking both composite and single contexts into account), and optimal route (shortest path) algorithm (based on dynamic programming). Through illustrative experimentation using the Wilcoxon signed rank test, we proved that context-based route planning is much more effective than distance-based route planning., In addition, we found that the optimal solution (shortest paths) through the distance-based route planning might not be optimized in real situation because road condition is very dynamic and unpredictable while affecting most vehicles' moving costs. For further study, while more information is needed for a more accurate estimation of moving vehicles' costs, this study still stands viable in the applications to reduce moving costs by effective route planning. For instance, it could be applied to deliverers' decision making to enhance their decision satisfaction when they meet unpredictable dynamic situations in moving vehicles on the road. Overall, we conclude that taking into account the contexts as a part of costs is a meaningful and sensible approach to in resolving the optimal route problem.

• Progress in Medical Physics
• /
• v.24 no.3
• /
• pp.154-161
• /
• 2013

This study assessed compared photon and proton treatment techniques, such as intensity modulated radiation therapy (IMRT), uniform scanning proton therapy (USPT), and intensity modulated proton therapy (IMPT), for a total of 10 prostate cancers. All treatment plans delivered 70 Gy to 95% of the planned target volume in 28 fractions. IMRT plans had 7 fields for the step and shoot technique, while USPT and IMPT plans employed two equally weighted, parallel-opposed lateral fields to deliver the prescribed dose to the planned target. Inverse planning was then incorporated to optimize IMPT. The homogeneity index (HI) and conformity index (CI) for the target and the normal tissue complication probability (NTCP) for organ at risk (OAR) were calculated. Although the mean HI and CI for target were not significantly different for each treatment techniques, the NTCP of the rectum was 2.233, 3.326, and 1.707 for IMRT, USPT, and IMPT, respectively. The NTCP of the bladder was 0.008, 0.003, and 0.002 respectively. The NTCP values at the rectum and bladder were significantly lower using IMPT. Our study shows that using proton therapy, particularly IMPT, to treat prostate cancer could be beneficial compared to 7-field IMRT with similar target coverage. Given these results, radiotherapy using protons, particularly optimized IMPT, is a worthwhile treatment option for prostate cancer.

• Clinical and Experimental Pediatrics
• /
• v.48 no.12
• /
• pp.1324-1329
• /
• 2005

Purpose : The aim of this study was to evaluate recent improvements in the survival rate of extremely low birth weight (ELBW) infants and to identify perinatal and management factors that are associated with improved survival. Methods : Two groups of ELBW infants who were admitted to our neonatal intensive care unit (NICU) during two distinct eras : November 1994-December 1999 (Period 1 : n=100) and January 2000-April 2004 (Period 2 : n=166) were retrospectively reviewed. Results : Despite the younger gestational age and smaller birth weight of the ELBW infants in period 2, not only did their survival rate increased to 75 percent from 60 percent in period 1, but their incidence of morbidities such as bronchopulmonary dysplasia, confimed sepsis and intraventricular hemorrhage (${\geq}$Grade III) also declined. Factors significantly associated with improved survival included the use of antenatal steroids, a longer duration of nasal continuous positive airway pressure and the absence of intraventricular hemorrhage (${\geq}$Grade III). Conclusion : We believe that optimized clinical practice, that emphasized less invasive care, contributed to the recent improvements in the survival rate of ELBW infants.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.4
• /
• pp.72-81
• /
• 2013

The objective of this study was to verify whether SCB(Slurry Composting & Bio-filtration) system can be applied for the treatment of anaerobic digestion(AD) wastewater and also, to identify the most effective set among three filtration compost beds tested. Results can be summarized as these; (a) When AD wastewater was sprayed on the top of beds which were mainly composed of sawdust and/or other media and, subsequently, filtrates collected and analyzed, there were large drop in the values of Electric Conductivity(EC), Total Suspended Solid(TSS), Biochemical Oxygen Demand(BOD), and Chemical Oxygen Demand(COD). In contrast, Total Nitrgen(T-N) and Total Phosphorus(T-P) were progressively elevated. We consider these changes as positive if the filtrate are to be utilized as liquid fertilizer. (b) When three sets of filtration beds (T1, T2, T3) were compared for their effectiveness, no significant difference was found among them. These indicate that expensive sawdust can be replaced in part with cheaper media such as woodchip, rice husks, or others. (c) At early stage of operation (within 20 days), BOD in filtrates were maintained at high level probably due to the lack of microbial activity. During the same stage, T-N, T-P was at low level but, were elevated to higher levels thereafter. These data, when combined, indicate that the filtration system needs at least a couple of weeks for the optimized microbial functioning. (d) The temperatures of the experimental beds were progressively dropped as the experiment continued through the fall season, although filtration effectiveness was not noticeably influenced.

• Korean Journal of Cognitive Science
• /
• v.27 no.4
• /
• pp.501-539
• /
• 2016

The human mind is a self-evolving system that develops along a multidimensional hierarchical pathway in response to traumatic stimulus. In absence of trauma, a mind integrated in conflict-free state is called monistic. When the monistic mind responses to a traumatic stimulus, a response polarity forms toward stimulus polarity within the mind, turning it into a bipartite structure. Dialectical interaction between the two opposites, originating from their incompatibility, creates a new third polarity in the upper dimension. Thereby, the mind turns into a trinity structure. When the interaction among the three polarities becomes optimized, the plasticity of the mind gets maximized into the "far-from-equilibrium state," and the function of three polarities is synchronized. Through this recalibration, the mind returns back to its monistic structure. If the mind with the recurred monistic structure responds to another traumatic stimulus, this cycle of hierarchical transformation repeats itself in this cyclical and fractal growth process through synchronization of basic trinity system. Applying this concept to the process of post-traumatic growth (PTG), this paper explores how the mind transforms traumatic experiences into PTG and proposes a 'PTG Clock' that shows a fundamental sequence in the development of the human mind. The PTG Clock consists of seven hierarchical phases, and each of the first six phases has two opposite sub-phases: shocked/numbed, feared/intrusive, paranoid/avoidant, obsessional/explosive, dependent/depressive, and meaningless/searching for meaning. The seventh, the synchronization phase, completes one cycle of the mind's transformation, realizing a grand trinity system, where the mind synchronizes its biological, social, and existential dimensions. At that point, the mind becomes more susceptible to not only the stimulus of its own traumatic experience but also the pain of others. Thereby, the PTG Clock sets out on a journey to another cycle of transformation in higher dimensions. The validity of this transformational process for the PTG Clock will be examined by comparing it to Horowitz's theory of stress response syndrome.