• Title/Summary/Keyword: optimization scheme

Search Result 1,157, Processing Time 0.027 seconds

Imperfect Trust Degree based Throughput Maximization for Cooperative Communications (불완전한 신뢰도 기반 정보 처리율 최대화 협력통신 기법)

  • Ryu, Jong Yeol;Hong, Jun-Pyo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.5
    • /
    • pp.589-595
    • /
    • 2019
  • Recently, the mobile social networks, which consider both social relationship between users and mobile communication networks, have been received great attention. In this paper, we consider the trust degree of node as the social relationship for the cooperative communication networks. In contrast to the existing works that consider the case of the perfect trust degree information, for the case that transmitter has an imperfect trust degree information, we propose an imperfect trust degree based cooperative communication technique that maximizes a throughput. We first model the imperfect trust degree information as a probability distribution and derive the outage probability using the probability distribution. Then, we propose the transmission scheme that maximizes the throughput, which consider both outage probability and transmission rate. The simulation results show that the proposed cooperative transmission scheme outperforms the conventional scheme in terms of the throughput.

A Compensation Scheme of Frequency Selective IQ Mismatch for Radar Systems (레이더 시스템을 위한 주파수 선택적 IQ 불일치 보상 기법)

  • Ryu, Yeongbin;Heo, Je;Son, Jaehyun;Choi, Mungak;Oh, Hyukjun
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.25 no.4
    • /
    • pp.565-571
    • /
    • 2021
  • In this paper, a compensation scheme of frequency selective IQ mismatch for high-performance radar systems based on commercial RFIC's is proposed. Besides, an optimization model and its solution based on the dimension reduction scheme using singular value decomposition are also proposed to design the optimal IQ mismatch compensation digital filter with complex coefficients. The performance of the proposed method had been analyzed through experiments using the IQ mismatch measurement and compensation system implemented on an FPGA board with a target RFIC and compared with the previous method. The experiment result showed a performance improvement of the proposed method over the existing one without noticeable increments in complexities. These performance analysis results showed that the limitation of using commercial RFIC's in high-performance radar systems due to the undesirable maximum SNR cap caused by their IQ mismatches could be overcome by employing the proposed method.

Conceptual design study on Plutonium-238 production in a multi-purpose high flux reactor

  • Jian Li;Jing Zhao;Zhihong Liu;Ding She;Heng Xie;Lei Shi
    • Nuclear Engineering and Technology
    • /
    • v.56 no.1
    • /
    • pp.147-159
    • /
    • 2024
  • Plutonium-238 has always been considered as the one of the promising radioisotopes for space nuclear power supply, which has long half-life, low radiation protection level, high power density, and stable fuel form at high temperatures. The industrial-scale production of 238Pu mainly depends on irradiating solid 237NpO2 target in high flux reactors, however the production process faces problems such as large fission loss and high requirements for product quality control. In this paper, a conceptual design study of producing 238Pu in a multi-purpose high flux reactor was evaluated and analyzed, which includes a sensitivity analysis on 238Pu production and a further study on the irradiation scheme. It demonstrated that the target structure and its location in the reactor, as well as the operation scheme has an impact on 238Pu amount and product quality. Furthermore, the production efficiency could be improved by optimizing target material concentration, target locations in the core and reflector. This work provides technical support for irradiation production of 238Pu in high flux reactors.

Collaborative Inference for Deep Neural Networks in Edge Environments

  • Meizhao Liu;Yingcheng Gu;Sen Dong;Liu Wei;Kai Liu;Yuting Yan;Yu Song;Huanyu Cheng;Lei Tang;Sheng Zhang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.18 no.7
    • /
    • pp.1749-1773
    • /
    • 2024
  • Recent advances in deep neural networks (DNNs) have greatly improved the accuracy and universality of various intelligent applications, at the expense of increasing model size and computational demand. Since the resources of end devices are often too limited to deploy a complete DNN model, offloading DNN inference tasks to cloud servers is a common approach to meet this gap. However, due to the limited bandwidth of WAN and the long distance between end devices and cloud servers, this approach may lead to significant data transmission latency. Therefore, device-edge collaborative inference has emerged as a promising paradigm to accelerate the execution of DNN inference tasks where DNN models are partitioned to be sequentially executed in both end devices and edge servers. Nevertheless, collaborative inference in heterogeneous edge environments with multiple edge servers, end devices and DNN tasks has been overlooked in previous research. To fill this gap, we investigate the optimization problem of collaborative inference in a heterogeneous system and propose a scheme CIS, i.e., collaborative inference scheme, which jointly combines DNN partition, task offloading and scheduling to reduce the average weighted inference latency. CIS decomposes the problem into three parts to achieve the optimal average weighted inference latency. In addition, we build a prototype that implements CIS and conducts extensive experiments to demonstrate the scheme's effectiveness and efficiency. Experiments show that CIS reduces 29% to 71% on the average weighted inference latency compared to the other four existing schemes.

Cost-Effective Inter-LMA Domain Distributed Mobility Control Scheme in PMIPv6 Networks (PMIPv6 네트워크에서 비용효과적인 도메인 간의 분산 이동성 제어기법)

  • Jang, Soon-Ho;Jeong, Jong-Pil
    • The KIPS Transactions:PartC
    • /
    • v.19C no.3
    • /
    • pp.191-208
    • /
    • 2012
  • Proxy Mobile IPv6 (PMIPv6) is designed to provide network-based mobility management support to an MN without any involvement of the MN in the mobility related signalling, hence, the proxy mobility entity performs all related signalling on behalf of the MN. The new principal functional entities of PMIPv6 are the local mobility anchor (LMA) and the mobile access gateway (MAG). In PMIPv6, all the data traffic sent from the MN gets routed to the LMA through a tunnel between the LMA and the MAG, but it still has the single point of failure (SPOF) and bottleneck state of traffic. To solve these problems, various approaches directed towards PMIPv6 performance improvements such as route optimization proposed. But these approaches add additional signalling to support MN's mobility, which incurs extra network overhead and still has difficult to apply to multiple-LMA networks. In this paper, we propose a improved route optimization in PMIPv6-based multiple-LMA networks. All LMA connected to the proxy internetworking gateway (PIG), which performs inter-domain distributed mobility control. And, each MAG keeps the information of all LMA in PMIPv6 domain, so it is possible to perform fast route optimization. Therefore, it supports route optimization without any additional signalling because the LMA receives the state information of route optimization from PIG.

Cluster-based P2P scheme considering node mobility in MANET (MANET에서 장치의 이동성을 고려한 클러스터 기반 P2P 알고리즘)

  • Wu, Hyuk;Lee, Dong-Jun
    • Journal of Advanced Navigation Technology
    • /
    • v.15 no.6
    • /
    • pp.1015-1024
    • /
    • 2011
  • Mobile P2P protocols in ad-hoc networks have gained large attention recently. Although there has been much research on P2P algorithms for wired networks, existing P2P protocols are not suitable for mobile ad-hoc networks because they do not consider mobility of peers. This study proposes a new cluster-based P2P protocol for ad hoc networks which utilizes peer mobility. In typical cluster-based P2P algorithms, each cluster has a super peer and other peers of the cluster register their file list to the super peer. High mobility peers would cause a lot of file list registration traffic because they hand-off between clusters frequently. In the proposed scheme, while peers with low mobility behave in the same way as the peers of the typical cluster-based P2P schemes, peers with high mobility behave differently. They inform their entrance to the cluster region to the super peer but they do not register their file list to the super peer. When a peer wishes to find a file, it first searches the registered file list of the super peer and if fails, query message is broadcasted. We perform mathematical modeling, analysis and optimization of the proposed scheme regarding P2P traffic and associated routing traffic. Numerical results show that the proposed scheme performs much better than or similar to the typical cluster-based P2P scheme and flooding based Gnutella.

Adaptive Predictive Control using Multiple Models, Switching and Tuning

  • Giovanini Leonardo;Ordys Andrzej W.;Grimble Michael J.
    • International Journal of Control, Automation, and Systems
    • /
    • v.4 no.6
    • /
    • pp.669-681
    • /
    • 2006
  • In this work, a new method of design adaptive controllers for SISO systems based on multiple models and switching is presented. The controller selects the model from a given set, according to a switching rule based on output prediction errors. The goal is to design, at each sample instant, a predictive control law that ensures the robust stability of the closed-loop system and achieves the best performance for the current operating point. At each sample the proposed control scheme identifies a set of linear models that best characterizes the dynamics of the current operating region. Then, it carries out an automatic reconfiguration of the controller to achieve the best possible performance whilst providing a guarantee of robust closed-loop stability. The results are illustrated by simulations a nonlinear continuous and stirred tank reactor.

Optimal Excitation Trajectories for the Dynamic Parameter Identification of Industrial Robots by Using Combined Model (통합모델과 최적 경로설계를 통한 산업용 로봇 동적 매개변수 규명)

  • Park, K.J.
    • Journal of Power System Engineering
    • /
    • v.12 no.2
    • /
    • pp.55-61
    • /
    • 2008
  • This paper discusses the advantages of using Fourier-based periodic excitation and of combining internal and external models in dynamic robot parameter identification. Internal models relate the joint torques or forces with the motion of the robot; external models relate the reaction forces and torques on the bedplate with the motion data. This combined model allows to combine joint torque/force and reaction torque/force measurements in one parameter estimation scheme. This combined model estimation will yield more accurate parameter estimates, and consequently better predictions of actuator torque, which is shown by means of a simulated experiment on a CRS A465 industrial robot.

  • PDF

DNS Based Location Management Scheme Supporting Route Optimization for Mobile Host (인터넷 호스트 이동성을 지원하는 DNS기반 위치수정 방안)

  • Jo, In-Jun;Jo, Gi-Hwan
    • Journal of KIISE:Information Networking
    • /
    • v.27 no.4
    • /
    • pp.429-440
    • /
    • 2000
  • 인터넷 프로토콜은 호스트 식별에 IP주소를 사용하는 반면에 응용프로그램에서는 인지의 편의성을 고려하여 호스트 이름을 사용한다. 따라서 사용자들이 사용하는 호스트 이름을 IP주소로 변환해 주는 DNS사용은 인터넷 응용 환경에서 절대적이다. 본 논문에서는 그 중요성이 증대되고 있는 인터넷상에서 호스트 이동성을 지원코자 할 때 DNS기능을 활용하여 호스트의 이동성에 적응적인 위치수정과 경로설정 방안(DNSLR:DNS based Location Registration)을 제안한다. DNSLR은 통신이 빈번하게 이루어지는 국지 DNS(Local DNS)를 중심으로 이동호스트의 위치수정을 제한하기 때문에 위치수정의 부담을 줄이는 반면에 대부분의 통신이 이동호스트의 홈 에이전트(HA:Home Agent)를 거치지 않고 이루어지기 때문에 최적에 가까운 경로설정을 제공한다.

  • PDF

Simplified Approach for Distortion Estimation in H.264 (H.264에서 간소화된 기법에 의한 왜곡치 예측)

  • Park, Ki-Hong;Kim, Yoon-Ho
    • Journal of Advanced Navigation Technology
    • /
    • v.14 no.3
    • /
    • pp.446-451
    • /
    • 2010
  • This paper addressed an another scheme of distortion estimation method based on simplified inverse quantization in H.264/AVC. The distortion is calculated by the difference of coefficient between quantized transform coefficients and that of inverse. In general, these process included such transforms as discrete cosine transform(DCT), quantization, inverse quantization(IQ), and Inverse DCT(IDCT). In proposed approach, IQ as well as IDCT process are skipped because of replacing a couple of approximated formulas. Some simulation have been conducted and it showed that the PSNR was almost the same, and reduced the rate-distortion optimization(RDO) mode decision time of 8~15% in comparison with conventional method.