• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권11호
• /
• pp.532-540
• /
• 2001

In this paper, we propose a probabilistic tabu search strategy for function optimization. It is composed of two procedures, one is Basic search procedure that plays a role in local search, and the other is Restarting procedure that enables to diversify search region. In basic search procedure, we use Belief space and Near region to create neighbors. Belief space is made of high-rank neighbors to effectively restrict searching space, so it can improve searching time and local or global searching capability. When a solution is converged in a local area, Restarting procedure works to search other regions. In this time, we use Probabilistic Tabu Strategy(PTS) to adjust parameters such as a reducing rate, initial searching region etc., which makes enhance the performance of searching ability in various problems. In order to show the usefulness of the proposed method, the PTS is applied to the minimization problems such as De Jong functions, Ackley function, and Griewank functions etc., the results are compared with those of GA or EP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.984-996
• /
• 2014

In this paper, optimal sensing time allocation for adaptive multiband spectrum sensing-transmission procedure is investigated. The sensing procedure consists of an exploration phase and a detection phase. We first formulate an optimization problem to maximize the throughput by designing not only the overall sensing time, but also the sensing time for every stage in the exploration and detection phases, while keeping the miss detection probability for each channel under a pre-defined threshold. Then, we transform the initial non-convex optimization problem into a convex bilevel optimization problem to make it mathematically tractable. Simulation results show that the optimized sensing time setting in this paper can provide a significant performance gain over the previous studies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1651-1654
• /
• 1997

Restiction of vertical and lateral accelerations is one of the very important requierments which has to be satisfied on the practice of automatically controlled flights of the civil aviation passenger planes. This goal could be achived on the basis of the optimization procedure using specilly constructed quadratic performance index. In the report the application of this procedure to the parameteric optimization of the control laws with known structure for autopilot of midium-size aircraft in the level flight model is demonstrated. Performance index is calculted on the basis of the controllability grammian. Results of simulation of control processes in the lateral and longitudinal channels sre represented.

• 한국CDE학회논문집
• /
• 제1권3호
• /
• pp.234-241
• /
• 1996

Recently, Genetic Algorithms(GAs), which consist of genetic operators named selection crossover and mutation, are widely adapted into a search procedure for structural optimization. Contrast to traditional optimal design techniques which use design sensitivity analysis results, GAs are very simple in their algorithms and there is no need of continuity of functions(or functionals) any more in GAs. So, they can be easily applicable to wide territory of design optimization problems. Also, virtue to multi-point search procedure, they have higher probability of convergence to global optimum compared with traditional techniques which take one-point search method. The introduction of basic theory on GAs, and the application examples in combination optimization of ten-member truss structure are presented in this paper.

• 소성∙가공
• /
• 제10권4호
• /
• pp.283-293
• /
• 2001

Laser welded tailored blanks(TB) are increasingly used in automotive parts. Among these, TB side panel has forming difficulties in stretch flanging areas such as front and center pillar lower region. To avoid splits in the stretch flanging areas, Proper design of blank shape and drawbeads are essential In this study, the forming simulaton is carried out to investigate the influences of blank shape and drawbeads on stretch flange formability of different thickness TB. And an optimization procedure including the effects of both the blank design and drawbeads is presented. The optimization procedure proposed in this study is expected to be effectively used in blank and die design of TB side panel.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1327-1337
• /
• 2004

An efficient multi-objective optimization method is presented making use of neural network and a systematic satisficing trade-off method (STOM), in order to simultaneously improve both maneuverability and durability of tire. Objective functions are defined as follows: the sidewall-carcass tension distribution for the former performance while the belt-edge strain energy density for the latter. A back-propagation neural network model approximates the objective functions to reduce the total CPU time required for the sensitivity analysis using finite difference scheme. The satisficing trade-off process between the objective functions showing the remarkably conflicting trends each other is systematically carried out according to our aspiration-level adjustment procedure. The optimization procedure presented is illustrated through the optimum design simulation of a representative automobile tire. The assessment of its numerical merit as well as the optimization results is also presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.701-704
• /
• 2003

Scoliosis is a complex musculoskeletal dieses requiring 3-D treatment with surgical instrumentation. Conventional corrective surgery for scoliosis was done based on empirical knowledge without information of the optimum position and operative procedure. Frequently, post operative change of rib hump increase and shoulder level imbalance caused serious problems in the view of cosmetics. To investigate the effect of correction surgery, a reconstructed 3-D finite element model for King-Moe type V was developed. Vertebrae, clavicle and other bony element were represented using rigid bodies. Kinematic joints and nonlinear bar elements used to represent the intervertebral disc and ligaments according to reported experimental data. With this model, optimization technique was also applied in order to define the optimal magnitudes of correction. The optimization procedure corrected the scoliotic deformities by reducing the objective function by more than 94%. with an associated reduction of the scoliotic descriptors mainly on the frontal thoracic curve.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.249-254
• /
• 2000

The contact forces between die components for the drawing of large size automotive panels introduce elastic deflections of the die components. Due to the deflections, the gap between blank holder and die varies locally resulting in nonuniform material flow. Such a nonuniform die gap usually requires correcting operation, so called die spotting, which is time consuming trial and error process. To reduce the die spotting time, the optimization of the blank holder bending deflection is needed. In this paper, we implemented an analysis procedure to predict the blank holder deflection. The analysis procedure and design of experiments techniques are applied to the optimization of balance block heights. The optimization results can be used as guidelines in actual die spotting process.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.117-127
• /
• 2017

PURPOSES : The objective of this research is establishing system components and optimizing operational procedures in order to systematically manage road cave-ins in urban areas. METHODS : Based on the literature review and alternative comparison, optimization methods is suggested. RESULTS : Throughout the study, location referencing system, database structure, and operation strategy(procedure) were clarified, and the optimization methods for each item were suggested. CONCLUSIONS : Road cave-in management should be focused on user safety rather than focusing on economic aspects. The occurrence of road cave-in should be addressed thoroughly by road management system(location referencing system, database structure, and operation strategy(procedure), and the optimization methods), since they are closely related to road users' safety.

• Computers and Concrete
• /
• 제26권1호
• /
• pp.1-10
• /
• 2020

In this paper, a procedure for automated optimized design of reinforced concrete frames has been presented. The procedure consists of formulation and solution of the design problem in the form of an optimization problem. The minimization of total cost of R/C frame has been taken as the objective of optimization problem. In this research, consistent approximation method is applied to explicitly formulate constraints and objective function in terms of the design variables. In the presented method, the primary optimization problem is replaced with a sequence of explicit sub-problems. Each sub-problem is efficiently solved using the Sequential Quadratic Programming (SQP) method. The proposed method is demonstrated through a four-story frame and an eight-story frame, and the optimum results are compared with those in the available literature. It is shown that the proposed method can be easily applied to obtain rational, reliable, economical and practical designs for Reinforced Concrete Moment Resisting Frames (RCMRFs) while it is converged after a few analyses.