• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.133-134
• /
• 2007

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1035-1040
• /
• 2004

In the proto design stage of a new car, the performance of an occupant protection system is often evaluated by CAE instead of the real test. CAE predicts and recommends the appropriate design values hence reducing the number of the real tests. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters, in which inconsistency between the actual test results and CAE exists. In this research, the optimization procedure of a protection system such as airbag and load limiter is suggested for the frontal collision. The DACE modeling known as Kriging interpolation is introduced to obtain the meta model of the system followed by the tabu search method to determine a global optimum. Finally, the distribution of a suggested design is determined through the Monte-Carlo Simulation.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.117-126
• /
• 2007

Although the diagnostic information provided by radiographs may be of definite benefit to the patients, the radiographic examination does carry the potential for harm from exposure to ionizing radiation. Therefore we should try to expose radiation as low as reasonably achievable and to give diagnostic information to patients as much as possible. All of dentists should have competence in radiation protection. I wish to deal with what we should do for the optimization of radiation protection in dental clinic.

• Journal of Communications and Networks
• /
• 제17권3호
• /
• pp.221-230
• /
• 2015

Rateless codes have been shown to be able to provide greater flexibility and efficiency than fixed-rate codes for multicast applications. In the following, we optimize rateless codes for unequal error protection (UEP) for multimedia multicasting to a set of heterogeneous users. The proposed designs have the objectives of providing either guaranteed or best-effort quality of service (QoS). A randomly interleaved rateless encoder is proposed whereby users only need to decode symbols up to their own QoS level. The proposed coder is optimized based on measured transmission properties of standardized raptor codes over wireless channels. It is shown that a guaranteed QoS problem formulation can be transformed into a convex optimization problem, yielding a globally optimal solution. Numerical results demonstrate that the proposed optimized random interleaved UEP rateless coder's performance compares favorably with that of other recently proposed UEP rateless codes.

• Journal of Radiation Protection and Research
• /
• 제28권2호
• /
• pp.145-154
• /
• 2003

By optimizing the radiation protection the collective dose and individual dose could be reduced during YGN #4 $5^{th}$ outage in 2001. The collective doses for the two high radiation jobs decreased to 85% and 65% of expected doses. The proportion of workers with low dose (below 1mSv) exposure increased 4% while the proportion of workers with over 3mSv and 5mSv exposure are decreased to 2%, 1% respectively. But none is exposed over 8mSv for the annual dose. To aid decision of utilizing the robot, cost- benefit analysis was performed and reasonable point was proposed to use the robot. For the first time job, repeated ALARA meeting and mock up training were implemented to set up working procedure by identifying the trouble. To easily set up standard procedure, mockup process was videotaped and reviewed during ALARA meeting. Monitoring is a good approach to chase radiological working condition such as working time, dose rate. behavior of workers, especially for high radiation work. Those data were estimated and adjusted from the stage of work planning to mock up. At the stage of actual work the monitoring data were compared to the estimation and recorded to database. This database will not only be used as a powerful tool for dose optimization at the following outage but also as a guideline to dose constraint set up for optimization for each specific situation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.157.2-157
• /
• 2001

This paper describes the synergism of Artificial Neural Network and Fuzzy Logic based approach to improve the reliability of transformer differential protection, the conventional transformer differential protection commonly used a harmonic restraint principle to prevent a tripping from inrush current during initial transformer´s energization but such a principle can not performs the best optimization on tripping time. Furthermore, in some cases there may be false operation such as during CT saturation, high DC offset or harmonic containing in the line. Therefore an artificial neural network and fuzzy logic has been proposed to improve reliability of the transformer protection relay. By using EMTP-ATP the power transformer is modeled, all currents flowing ...

• 한국정보통신학회논문지
• /
• 제18권10호
• /
• pp.2537-2543
• /
• 2014

탠덤 소스-채널 코딩 시스템과 결합 소스-채널 코딩시스템 사이에 복잡도에 대한 성능에 있어서 복잡도 문턱값이 존재한다는 것이 알려져 왔다. 본 논문에서는 균등 오류 보호 기법을 사용한 기존의 분석을 확장하여 비균등 오류 보호 기법을 사용한 탠덤 소스-채널 코딩 시스템의 복잡도에 따른 성능을 비교 분석하고자 한다. 복잡도의 제한이 주어진 상황에서 대표적인 탠덤 소스-채널 코딩 시스템과 결합 소스-채널 코딩 시스템의 최종단 왜곡을 최소화하는 최적화를 시행하였다. 그 결과, 비균등 오류 보호의 탠덤 소스-채널 코딩 시스템의 복잡도 문턱값은 더 작아지며, 균등 오류 보호 시스템에 대한 비균등 오류 정정 기법의 시스템의 성능 향상은 시스템 복잡도가 높아질수록 작아짐을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.401-410
• /
• 2017

In this work, we show that the excessive lattice heating problem due to parasitic pnp transistor action in the diode electrostatic discharge (ESD) protection device in the diode input protection circuit, which is favorably used in CMOS RF ICs, can be solved by adopting a symmetrical cathode structure. To explain how the recipe works, we construct an equivalent circuit for input human-body model (HBM) test environment of a CMOS chip equipped with the diode protection circuit, and execute mixed-mode transient simulations utilizing a 2-dimensional device simulator. We attempt an in-depth comparison study by varying device structures to suggest valuable design guidelines in designing the protection diodes connected to the $V_{DD}$ and $V_{SS}$ buses. Even though this work is based on mixed-mode simulations utilizing device and circuit simulators, the analysis given in this work clearly explain the mechanism involved, which cannot be done by measurements.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.33-44
• /
• 1995

As the occupant safety receives more attention from automobile industries. protection systems have been developed quite well. Developed protection systems must be evaluated through real tests in crash environment Since the real tests are extremely expensive. computer simulations are replaced for some prediction of the real test In the computer simulation. it is very crucial to express the real environment precisely in the modeling precess. The energy absorbing(EA) steering system has a very important rote in vehicle crashes because the occupant can hit the system directly. In this study. the EA steering system is modeled precisely. analyzed for the safely and designed by an optimization technology. First. the EA steering system is disassembled by parts and modeled by segments and joints. The segments are modeled by rigid bodies in motion and they have resistances in contact. Spring-damper elements and force-deflection curves are utilized to represent the joints. The body block test is cal lied out to validate. the modeling. When the test results are not enough for the detailed modeling. the differences between tests and simulations are minimized to calculate unknown parameters using optimization. The established model is applied to a crash simulation of a full-car model and tuned again. After the modeling is finished. components of the steering system are designed by an optimization algorithm. In the optimization process. the compound injury of a driver is defined and minimized to determine the chracteristics of the components. The second. order approximation algorithm has been adopted for the optimization.

• 한국환경농학회지
• /
• 제37권3호
• /
• pp.229-234
• /
• 2018

In vitro 소핵시험(vitMNT)은 유전독성의 유망한 대체시험법 중 하나로, OECD에서 TG로 채택되어 화학물질의 등록에 사용되고 있다. 본 시험에서는 CHL cell을 사용한 vitMN test에서 소핵을 판별하기 위한 최적화된 세포질 조건을 찾고자 하였으며, 양성대조물질로 MMC와 Col을 사용하고 세포 염색을 위해 giemza 용액을 사용하였다. 시험결과, 세포현탁을 위해 사용되는 고정액의 acetic acid의 농도는 1%로 하는 것이 band의 두께와 세포질의 퍼짐성 측면에서 적당하였다. 또한 세포의 깨짐을 최소화하는 최종 고정액의 적하시간은 현탁 후 1~4시간이었다. 이러한 결과는 vitMNT에서 소핵관찰의 신속성, 용이성 및 정확성을 확보하는데 도움이 될 것이다.