• 한국항행학회논문지
• /
• 제14권6호
• /
• pp.831-837
• /
• 2010

광 시간 분할 다중/파장 분할 다중 (OTDM/WDM; optical time division multiplexing/wavelength division multiplexing) 전송 시스템의 구현을 위한 40 Gbps RZ 형식의 최적 조건을 충격 계수 (duty cycle)와 소광비 (ER; extinction ratio)에 따른 성능 분석과 비교를 통해 도출하였다. 광전송 링크에는 광섬유의 색 분산과 비선형에 의한 신호 왜곡을 보상하기 위해 광 위상 공액기 (OPC; optical phase conjugator)와 inline 분산 제어 (DM; dispersion management)가 적용되었다. ER에 따른 시스템 성능 변화의 영향이 적으면서 동시에 OTDM에 의한 160 Gbps 신호로의 다중화에 적합한 충격 계수는 0.25이라는 것을 확인하였다. 또한 DM의 적용에 있어 중계 거리 당 잉여 분산 (RDPS; residual dispersion per span)을 크게 할수록 동일한 전체 잉여 분산 (NRD; net residual dispersion)에 의해 결정되는 RZ 형식의 성능 개선 정도를 증가시킬 수 있는 것을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.247-247
• /
• 2012

Plasmon subwavelength nanostructures enable the structurally modulated color due to the resonance conditions for the specific wavelength range of light with the nanoscale hole arrays on a metal layer. While the unique properties offered from a single layer of metal may open up the potential applications of integrated devices to displays and sensors, fabrication requirements in nanoscale, typically on the order of or smaller than the wavelength of light in a corresponding medium can limit the cost-effective implementation of the plasmonic nanostructures. Simpler nanoscale replication technologies based on the soft lithography or roll-to-roll nanoimprinting can introduce economically feasible manufacturing process for these devices. Such replication requires an optimal design of a master template to produce a stamp that can be applied for a roll-to-roll nanoimprinting. In this paper, a master mold with subwavelength nanostructures is fabricated and optimized using focused ion beam for the applications to nanoimprinting process. Au thin film layer is deposited by sputtering on a glass that serves as a dielectric substrate. Focused ion beam milling (FIB, JEOL JIB-4601F) is used to fabricate surface plasmon subwavelength nanostructures made of periodic hole arrays. The light spectrum of the fabricated nanostructures is characterized by using UV-Vis-NIR spectrophotometer (Agilent, Cary 5000) and the surface morphology is measured by using atomic force microscope (AFM, Park System XE-100) and scanning electron microscope (SEM, JEOL JSM-7100F). Relationship between the parameters of the hole arrays and the corresponding spectral characteristics and their potential applications are also discussed.

• 대한전자공학회논문지SD
• /
• 제42권11호
• /
• pp.17-22
• /
• 2005

21세기 광통신 분야는 보다 많은 정보를 동시에 전송하기 위해 다양한 다중화 방식들을 요구 받고 있다. 광섬유 Brags격자 소자를 이용한 모든 광 분기/결합 장치는 분기/결합할 수 있는 신호가 광섬유 격자 소자의 Bragg파장에 의해 정해지므로 하나의 광섬유 격자 소자는 고정된 한 채널만을 분기, 결합할 수 있다는 단점을 지니고 있다. 그러나 광섬유 격자에 온도와 스트레인(strain) 같은 외부 물리량을 가하게 되면 광섬유 격자의 주기가 변하게 되어 반사파장이 고정되지 않고 파장을 가변 할 수 있는 장점을 가지게 된다. 이에 본 논문에서는 광섬유 격자 소자에 가해진 온도, 스트레인에 의해 Bragg파장이 변화하는 성질을 이용하여 파장 가변형 Bragg 격자를 제작 및 실험을 통하여 전광필터 특성에 대하여 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제31권6호
• /
• pp.472-480
• /
• 2010

Mechanically deformed cartilage undergoes a temperature dependent phase transformation resulting in reshaping of cartilage. Laser-assisted cartilage reshaping (LCR) is recently introduced to recreate the underlying cartilage framework in structures such as ear, larynx, trachea, and nose. However, this procedure has not been fully supported by confirmed efficacy because of the lack of scientific research and its safety issues. The purpose of this study is to evaluate current laser sources to determine optimal laser wavelength for LCR using mathematical simulations and investigate optical, thermo-mechanical, and backscattering properties of cartilage after laser irradiation. The results showed that 1444 nm wavelength was effective for reshaping of cartilage with minimal thermal damage in the surrounded tissues by monte carlo simulations. Analysis of bend angle changes, thermo-mechanical characteristics, and backscattered properties may be useful to better identify the biophysical transformation responsible for stress relaxation in cartilage and develop an optical feedback control methodologies.

• 한국통신학회논문지
• /
• 제30권3A호
• /
• pp.160-167
• /
• 2005

WDM(Wavelength Division Multiplexing) 광통신망의 노드에서 신호채널들이 분기 결합될 때 잔류채널들의 이득을 일정하게 제어해 주기 위해 고정이득 EDFA를 사용한다. 본 논문에서는 양방향 펌프에 의해 고이득을 가지는 L-band EDFA에서 발진광에 의해 입력변화를 보상해주는 방식으로 고정이득 EDFA를 구현하였다. 여기서 발진방향 및 파장에 따른 잔류채널의 과도응답 특성에 있어서 단파장 후방발진의 경우가 최적임을 확인할 수 있었다.

• 센서학회지
• /
• 제17권2호
• /
• pp.120-126
• /
• 2008

Glucose concentrations in the interstitial fluid were measured based on optical spectroscopy. Prediction of glucose concentrations was made using partial least squares regression and accuracy improvement was achieved by data preprocessing as well as by selecting an optimal wavelength region. For this purpose, artificial interstitial fluid samples were prepared where their glucose levels varied between 0 and 10 g/dl. Infrared spectral regions where glucose absorption lies were investigated. A region of 1000 - 1500 $cm^{-1}$ produced the best accuracy among the regions of 1000 - 1500 $cm^{-1}$, 4000 - 4545 $cm^{-1}$1 and 5500 - 6500 $cm^{-1}$. Further accuracy improvement in 1000 - 1500 $cm^{-1}$ was achieved by selecting specific wavelength bands based on a loading vector analysis method. For the samples whose glucose concentrations ranged between 0 and 0.5 g/dl, SEP= 0.0266 g/dl and R =0.9863 were achieved with 1000 - 1500 $cm^{-1}$. However, the loading vector optimized band of 1002 - 1095 $cm^{-1}$ reduced the prediction error up to 47 % (SEP =0.0125 g/dl and R=0.9970).

• 한국항행학회논문지
• /
• 제17권2호
• /
• pp.208-217
• /
• 2013

분산 제어 (DM; dispersion management)와 광 위상 공액 (optical phase conjugation)이 적용된 광전송 링크에서 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span) 기울기 (slope)에 따른 파장 분할 다중 전송 (WDM; wavelength division multiplexed) 채널의 보상 특성을 분석하여 최적의 RDPS 기울기를 도출하였다. RDPS 기울기가 증가할수록 WDM 채널의 유효 입사 전력 범위를 더욱 증가시키고 채널 간 성능 차이를 더욱 감소시키는 것을 확인하였다. 아울러 RDPS 기울기가 증가할수록 유효 전체 잉여 분산 (NRD; net residual dispersion) 범위도 증가하여 큰 RDPS 기울기가 유연한 광전송 링크 구성에 더욱 유리하다는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1340-1342
• /
• 1998

The diamond-like carbon(DLC) film, as an antireflection layer, is coated on a commerically used Ge window. DLC films are deposited by using an rf(13.56 MHz) plasma CVD. The optimal value of thickness and refractive index of DLC layer has been determined from the computer simulation. IR-transmittances of DLC-coated Ge windows are estimated by measuring FTIR spectra in the wavelength range of$ 2.5{\sim}25{\mu}m$. By coating the DLC film on one side of the Ge window, the transmittance measured at a wavelength of $10{\mu}m$ is about 60 %, while that of the bare Ge is lower than 50 %. Also, a higher transmittance up to about 90 % is obtained by coating the DLC film on both sides of the window. It may be suggested that the further improvement of the IR-transmittance can be achieved by more precisely controlling the thickness and the refractive index of DLC layer and also by adopting various muliti-layer antireflection structures.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.221-228
• /
• 2013

About functional parameters of a LED/UVLED (Light Emitting Diode/Ultra Violet LED), one of the most important parameters is the I-V characteristic. By researching factors affect to the I-V characteristic of uvled, we found that beside of the structure of the device itself, there is the influence of the electrode materials, electrode shapes, the process of wiring and packaging. In this work, we want to improve the performance of UVLED to find out the optimal mask design principles. The study is based on theoretical mathematical models, as well as the use of simulation software tool Comsol. From all results obtained, the team has improved mask design to manufacture electrodes for GaN-based UVLED. Electrode masks are designed by three softwares, which are Intellisuite, Klayout and AutoCad. Intellisuite masks would be used in fabrication simulation while Klayout and AutoCad are used to fabricate electrodes in experiments. As well as, we silmulated the structure of an uvled 355nm emission wavelength by TCAD software, in order to compare with uvled sample that has the same emission wavelength.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.248-251
• /
• 2009

We have investigated the effect of the quality of 1.3 um distributed feed back laser diode (DFB-LD) on the design of anti-reflection (AR) coatings. Optimal condition of AR coating to prevent internal feedback from both facets and reduce the reflection-induced intensity noise of laser diode was simulated with Macleod Simulator. Coating materials used in this work were ${Ti_3}{O_5}$ and $SiO_2$, of which design thickness were 105 nm and 165 nm, respectively. AR coating films were deposited by Ion-Assisted Deposition system. The electrical and optical properties of 1.3 um laser diode were characterized by Bar tester and Chip tester. Threshold current and slop-efficiency of DFB-LD were 27.56 mA 0.302 W/A. Far field pattern and wavelength of DFB-LD were $22.3^{\circ}(Horizontal){\times}24.4^{\circ}$ (Vertical), 1313.8 nm, respectively.