• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.280-284
• /
• 2015

Among many the oxynitrides, TiNO and AlCrNO, have diverse applications in different technological fields. We prepared TiNO/AlCrNO/Al thin films on aluminum substrates using the method of dc reactive magnetron sputtering. The reactive gas flow, gas mixture, and target potential were applied as the sputtering conditions during the deposition in order to control the chemical composition. The multi-layer films have been prepared in an Ar and O₂+N₂ gas mixture rate. The surface properties were estimated by performing scanning electron microscopy (SEM). At a wavelength range of 0.3~2.5 μm, the exact composition and optical properties of thin films were measured by Auger electron spectroscopy (AES) and Ultraviolet-visible-near infrared (UV-Vis-NIR) spectrophotometry. The optimal absorptance of multi-layer films was exhibited above 95.5% in the visible region of the electromagnetic spectrum, and the reflectance was achieved below 1.89%.

• 한국동물위생학회지
• /
• 제18권3호
• /
• pp.13-28
• /
• 1995

This study was carried out to explore the most sensitive and useful method for simultaneous determination of five sulfa drugs(sulfamethazine, sulfamerazine, sulfamonomethoxine, sulfadimethoxine, sulfaquinoxaline) in livestock productions(pork muscle, bovine muscle, chicken muscle, milk ) by HPLC with UV detector and reverse phase column. The results obtained were as follows：1. For mobile phase acetonitrile-0.01M ammonium acetate (23：77) showed more applicable sensitivity and retention times than acetonitrile-1% acetic acid(23：77). Thus acetonitrile-0.01M ammonium acetate(23：77) selected and applied to the modification test, from which it was found pH 6.75 was the most adequate. 2. Optimal wavelength of UV for SMT(sulfamethazine), SMR(sulfamerazine), SMM(sulfamonomethoxine), SD(sulfadimethoxine), and SQ(sulfaquinoxaline) were 266, 266, 265, 269 and 250nm, respectively, and that for simultaneous application it was 263nm. 3. The average recovery rate by extractant(chloroform, dichloromethane, chlorform+dich-loromethane) in the classic method was not significantly different(p>0.05) but that by chloroform higher than the others. Thus chloroform was found to be adequate as extractant in this classic method. 4. The average recovery rate was 86.5% by the MSPD(matrix solid phase disperse) method, which was significantly higher than that by the classic method(p<0.05). Also the recovery rates by method were significantly different(p<0.05) in accordance with sample and type of drug. The MSPD method was much superior to classic method on clean-up.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.13-21
• /
• 2015

In recent years energy consumption has become a main concern for network development, due to the exponential increase of network traffic. Potential energy savings can be obtained from a load-adaptive scheme, in which a day can be divided into multiple time periods according to the variation of daily traffic patterns. The energy consumption of the network can be reduced by selectively turning off network components during the time periods with light traffic. However, the time segmentation of daily traffic patterns affects the energy savings when designing multiperiod logical topology in optical wavelength routed networks. In addition, turning network components on or off may increase the overhead of logical topology reconfiguration (LTR). In this paper, we propose two mixed integer linear programming (MILP) models to design the optimal logical topology for multiple periods in IP-over-WDM networks. First, we formulate the time-segmentation problem as an MILP model to optimally determine the boundaries for each period, with the objective to minimize total network energy consumption. Second, another MILP formulation is proposed to minimize both the overall power consumption (PC) and the reconfiguration overhead (RO). The proposed models are evaluated and compared to conventional schemes, in view of PC and RO, through case studies.

• 대한화학회지
• /
• 제42권6호
• /
• pp.638-645
• /
• 1998

아세트산아연으로부터 ITO유리전극위에 열분무법을 이용한 산화아연의 박막을 만들고, 박막 표면의 형태는 SEM으로 조사하였다. 산화아연 박막의 두께는 온도를 증가시키면 약 833 nm까지 증가하다가, 480$^{\circ}C$ 부터는 오히려 감소하는 경향을 나타내었다. 분광 흡광도는 365 nm에서 관측되었고 형광 특성은 475 nm, 505 nm에서 최대의 세기를 나타내었다. 산화아연의 생성은 X선 광전자 분광 스펙트럼으로 확인하였으며, X선 회절 무늬로부터 (002) 면이 기질온도에 따라 우세한 방향으로 성장함을 알 수 있었다. 산화아연의 합성 최적의 온도는 X선 회절 무늬와 광전류의 측정값으로부터 460$^{\circ}C$ 부근임을 확인하였다. 또한 산화아연의 입자의 크기가 균일할수록 광전류가 증가함을 알 수 있있다.

• 한국통신학회논문지
• /
• 제29권4B호
• /
• pp.455-463
• /
• 2004

이 논문은 파장 분할 다중화 (Wavelength Division Multiplexing, WDM) 기술의 링-그물 구조를 가진 망을 설계하는 알고리즘을 제시한다. 링-그물 망을 설계하는 문제는 OADM과 OXC 비용을 최소로 하면서 트래픽을 만족시키는 그물 라우팅과 링 토폴로지를 설계한다. 링 토폴로지는 OADM으로 구성되어 링 내의 노드간 트래픽을 처리하고, 그물 라우팅은 서로 다른 링에 있는 노드간에 발생하는 트래픽을 OXC를 이용해서 처리한다. 링 토풀로지와 그물 라우팅 문제를 동시에 해결하기 위해서 정수 계획법 (Integer Programming) 모델을 개발한다. 링-그물 문제는 NP-Hard이므로 실제 크기의 망 문제에서 주어진 시간내 좋은해를 생성하는 효과적인 타부 서치 휴리스틱을 제안한다. 타부 서치 휴리스틱 성능을 상업용 소프트웨어인 CPLEX 7.0 으로 구한 해와 비교한 결과 5초 내에 총비용의 오차 범위가 3% 이내인 우수해를 구한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.972-975
• /
• 2003

We have performed computer simulation to obtain electro-optic characteristics of reflective hybrid aligned nematic liquid crystal displays driven by fringe field. The results show that the optimal retardation value of the cell is $0.289{\mu}m$, which allows for the cell to have a practical cell gap of larger than $3{\mu}m$ when manufacturing. A reflectance of the dark state is only 0.114% for an incident light 550nm. At this condition, the light efficiency of white state reaches 92.7%. Further, we have studied a new reflective display with polarizer, optical compensation with half plate, LC plus reflector. The display with optimized cell parameters shows low wavelength dispersion and the contrast ratio greater than 5 over exists about $120^{\circ}$ in vertical direction and $160^{\circ}$ in horizontal direction.

• 한국광학회지
• /
• 제21권1호
• /
• pp.1-5
• /
• 2010

본 논문에서는 실리콘 태양전지의 흡수효율 증가를 위해 도파모드 공진 특성을 이용한 격자 구조를 제안하였다. 도파모드 공진을 이용함으로써 두께를 ~200 nm 수준으로 줄이면서도 높은 흡수율을 기대할 수 있는 태양전지 설계가 가능함을 확인하였다. 제안된 구조는 은으로 된 반사경 위에 격자구조를 갖는 Poly-Si 유전체 층이 존재하는 1-D 구조로서 각 구조변수들 즉 격자의 주기, 유전체 두께, 격자 간격 및 깊이 등이 흡수 효율에 어떤 영향을 미치는지 알아보고, 변수들의 조절을 통해 최적의 구조를 찾고자 시도하였다. PSO알고리즘을 사용하여 제안된 구조의 적절성을 확인 하였으며, 이로부터 65.8%의 유효 흡수율을 얻을 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.179.1-179.1
• /
• 2014

Si nanowires have exhibited unique optical characteristics, including nano-antenna effects due to the guided mode resonance, significant optical absorption enhancement in wide wavelength and incident angle range due to resonant optical modes, graded refractive index, and scattering. Since Si poor optical absorption coefficient due to indirect bandgap, all such properties have stimulated proposal of new optoelectronic devices whose performance can surpass that of conventional planar devices. We have carried out finite-difference time-domain simulation studies to design optimal Si nanowire array for solar cell applications. Optical reflectance, transmission, and absorption can be calculated for nanowire arrays with various diameter, length, and period. From the absorption, maximum achievable photocurrent can be estimated. In real devices, serious recombination loss occurring at the surface states is known to limit the photovoltaic performance of the nanowire-based solar cells. In order to address such issue, we will discuss how the geometric parameters of the array can influence the spatial distribution of the optical field (resulting optical generation rate) in the nanowires.

• KSBB Journal
• /
• 제23권1호
• /
• pp.96-100
• /
• 2008

한국산 녹차로부터 HPLC On-line $ABTS^{+}$ screening기법을 사용하여 catechin compounds의 특성중의 하나인 항산화활성을 빠르게 분석하였으며 녹차로부터 catechin compound의 추출을 다양한 온도와 시간의 추출방법을 적용하였다. 전 처리한 추출액에 포함된 catechin compounds을 분석하고 최적의 추출조건을 실험적으로 모색하였다. 실험결과에 의하면 추출온도 $60^{\circ}C$, 추출시간 3분으로 추출한 시료가 항산화활성이 가장 우수하였다.

• KSBB Journal
• /
• 제28권3호
• /
• pp.170-176
• /
• 2013

The purpose of this study was to determine optimum condition of Pavlova lutheri and Phaeodactylum tricornutum. Detailed studies were carried out on the effects of various wavelengths of light-emitting diodes (LEDs), light intensities and air flow rations. For the Pa. lutheri, cell growth rates and maximum cell concentrations were similar regardless of wavelengths and air flow rates. Among the different light intensities, cell concentration increased when light intensity of red LED increased. For Ph. tricornutum, red LED was found to be the most effective light source, and light intensity of 3,100 Lux resulted in the most effective for the cultivation of Ph. tricornutum. Different air flow rates were tested to overcome shading effects due to denser cell concentration in the solution. Aeration of 0.8 vvm was determined to be the optimum aeration rate for the cultivation of Ph. tricornutum. Especially, five and two times greater cell concentrations of Pa. lutheri and Ph. tricornutum, respectively, were observed when air was applied.