• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1582-1589
• /
• 2016

In this paper the integration of Distributed Generation (DG) in radial distribution system is investigated by computing the optimal site and size of DG to be placed. An analytical expression based on equivalent current injection has been derived by utilizing topological structure of radial distribution system to find optimal size of DG to minimize losses. In the presented formulation, the optimal DG placement is obtained without repeatedly computing the load flow. The proposed formulation can be used to find the optimal size of all types of DGs namely Type-I, Type-II, Type-III and Type-IV DGs. The investigations are carried out on IEEE 33-bus and 69-bus radial distribution systems. The optimal DG placement results into reduction in active and reactive power losses and improvement in voltage profile of the buses.

• Journal of Korean Society for Quality Management
• /
• v.31 no.3
• /
• pp.185-192
• /
• 2003

In this paper, the properties on the optimal replacement policies for the general failure model are developed. In the general failure model, two types of system failures may occur : one is Type I failure (minor failure) which can be removed by a minimal repair and the other, Type II failure (catastrophic failure) which can be removed only by complete repair. It is assumed that, when the unit fails, Type I failure occurs with probability 1-p and Type II failure occurs with probability p, $0\leqp\leq1$. Under the model, the system is minimally repaired for each Type I failure, and it is repaired completely at the time of the Type II failure or at its age T, whichever occurs first. We further assume that the repair times are non-negligible. It is assumed that the minimal repair times in a renewal cycle consist of a strictly increasing geometric process. Under this model, we study the properties on the optimal replacement policy minimizing the long-run average cost per unit time.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.59-64
• /
• 2001

This paper analyzes the performance of the several types of ACL(Asynchronous ConnectionLess) packets used in Bluetooth according to a BER(Bit Error Rate) and a packet length and proposes an optimal packet type and an optimal size of the packet being able to be used under the given BER. This paper proposes how to obtain the optimal packet type and the optimal size of the packet maximizing the performance measure under the given BER. In addition, this paper shows that the optimal type and size of the packet maximizing the throughput are different from those maximizing the mean transmission time. This occurs because the Bluetooth uses not only one type of packet but also various types of packets.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.46-49
• /
• 2009

An optimal design procedure is proposed to effectively reduce the torque ripple by optimizing the rotor pole shape of the spoke type IPMSM with concentrated winding. The procedure is composed of two steps. In step I, the steepest descent method (SDM) is used with only two design variables to rapidly approach the optimal shape. From the near optimal rotor shape as a result of the step I, the design variables are reselected and the drawing spline curves are utilized to explain more complex shape with the Kriging model in step II. By using an optimal design procedure, we show that the optimized rotor pole shape of the spoke type IPMSM effectively reduces the torque ripple while still maintaining the average torque.

• Journal of Integrative Natural Science
• /
• v.5 no.3
• /
• pp.186-189
• /
• 2012

For the mean vector of a p-variate normal distribution ($p{\geq}3$), the optimal estimation within the class of James-Stein type decision rules under the quadratic loss are given when the underlying distribution is that of a variance mixture of normals and when the norm ${\parallel}\underline{{\theta}}{\parallel}$ in known. It also demonstrated that the optimal estimation within the class of Lindley type decision rules under the same loss when the underlying distribution is the previous type and the norm ${\parallel}{\theta}-\overline{\theta}\underline{1}{\parallel}$ with $\overline{\theta}=\frac{1}{p}\sum\limits_{i=1}^{n}{\theta}_i$ and $\underline{1}=(1,{\cdots},1)^{\prime}$ is known.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.4
• /
• pp.277-290
• /
• 2011

We define some multi-type asset models derved from L$\acute{e}$vy proceses which emphasize coefficients of stochastic differential equations. Also these asset models can be represented by Doleance-Dade linear equations derived from jump-type semimartingales which are decomposed by various terms of time basically. For these asset models, we can construct optimal portfolio strategy by using filtered various information at each check time.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.14 no.2
• /
• pp.79-91
• /
• 2010

In this paper, a class of fractional integrodifferential equations of mixed type with nonlocal conditions is considered. First, using contraction mapping principle and Krasnoselskii's fixed point theorem via Gronwall's inequailty, the existence and uniqueness of mild solution are given. Second, the existence of optimal pairs of systems governed by fractional integrodifferential equations of mixed type with nonlocal conditions is also presented.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.396-402
• /
• 2001

In various applications of queueing systems, admission control is often employed. It is known that the threshold-type of admission control is optimal in many practical applications despite its simplicity. However, determining the optimal threshold value is hard in general, because analytical expressions for the stationary queue length distributions are not easily available in most queueing systems. In this paper, to quickly determine the optimal threshold value under threshold-type admission control, we develop a concurrent simulation technique, which can save large amount of CPU time required in simulation, compared to the standard simulation procedure.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1359-1363
• /
• 2017

The purpose of this study was that the optimal hydrolysis conditions of endo- and exo-type enzymes were selected to utilize organic cheese byproducts. Optimal substrate concentration and optimum enzyme ratio were measured by using 4 kinds of endo-type enzymes (alcalase, neutrase, protamex, and foodpro alkaline protease) and two exo-type enzymes (flavourzyme and prozyme 2000P) for whey protein hydrolysis were analyzed using liquid chromatography. As a result, the optimal endo-type enzyme through the first enzyme reaction was selected as alcalse, and as a result of the secondary enzyme reaction, flavourzme was selected as the Exo type enzyme. The concentration of whey protein substrate for optimal primary and secondary enzyme reactions was 10%. In addition, the optimum ratio of enzyme was 0.5% of alcalase and 0.2% of flavourzyme, which showed low molecular weight chromatography pattern compared to 2% of alcalase and 1% of flavourzyme hydrolyzate. Therefore, hydrolyzing the endo-type enzyme alcalase at a concentration of 0.5% for 10 hours and then hydrolyzing the exo-type enzyme flavouryme at a concentration of 0.2% for 4 hours was considered to be the optimum condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.605-610
• /
• 1994

Optimal design of fault-tolerant, spatial type maniplators is treated in this paper. Design objective is to guarantte three degree-of-freedom translational motions in the task space, upon failure of one arbitrary joint of 4 degree-of -freedom manipulators. Realizing the nonfault-tolerant characteristics of current, wrist-type industrial manipulators, several 4 degree-of-freedom redundant structures with one joint redundancy are suggested as the fault-tolerant spatial -type manipulators. Fault-tolerant charactersitics are investigated basedon the analysis of the self-motion and the null-space elements, of a redundant manipulator. Finally, in order to maximize the fault-tolerant capability,optimal design is performed for a spatial-type manipulator with respect to the global isotropic index, and the performance enhancement of the optimized case is shown by simulation.