• Applied Biological Chemistry
• /
• 제37권4호
• /
• pp.295-302
• /
• 1994

광합성세균에 의한 고농도 유기폐수 처리공정의 개발을 목적으로 폐수처리용 균주를 분리 동정하고 최근 고농도 유기폐수처리에 도입되고 있는 혐기성 소화와 광합성세균 반응조로 구성된 two-stage system에 적용시켜 각 단계별 폐수처리 최적화를 위한 조건들을 flask-scale에서 검토하였다. 부영양화된 토양, 연못, 논, 활성오니 등으로부터 1차적으로 활성이 높고 유기산 자화율이 우수한 균주를 분리하고 이중 가장 우수한 균주인 KK14를 선별하고 동정한 결과 Rhodopseudomonas palustris로 판명되었다. 광합성세균을 이용한 폐수처리공정의 첫단계인 산생성 단계에서는 혐기정치배양이 유기산 생성에 적합하였고 pH 5.0, HRT 2일로 운전시약 80%의 유기산 증가율을 보였다. 생성된 유기산이 광합성세균에 의해 자화되는 둘째 단계에서는 광합성세균 반응조의 조건을 pH 7.0, 온도 $30^{\circ}C$, 조도 4,000 lux로 했을 때 균의 생육도 및 유기산 자화율이 가장 우수했으며 초기 COD부하(kg COD/kg 광합성세균 건조중량)는 2 전후에서 가장 높은 COD제거율(92%/5일)을 나타내었다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.173-177
• /
• 2013

The purpose of this paper is to investigate the influences on mechanical properties of two-stroke cycle motor pistons manufactured by casting, conventional forging and powder forging, through the comparison of characteristics, merits and disadvantages of each forming technology. For each forming technology, the optimal process parameters were determined through the experiments for several conditions, and microstructure, hardness, tensile strength and elongation of pistons are compared and analyzed. In conventional forging process, material temperature was $460^{\circ}C$ and the die temperature was $210^{\circ}C$ for the Al 4032. The optimal condition was found as solution treatment under $520^{\circ}C$ for 5 hours, quenching with $23^{\circ}C$ water, and aging under $190^{\circ}C$ for 5 hours. In powder forging process, the proper composition of material was determined and optimal sintering conditions were examined. From the experiment, 1.5% of Si contents on the total weight, $580^{\circ}C$ of sintering temperature, and 25 minutes of sintering time were determined as the optimal process condition. For the optimal condition, the pistons had 76.4~78.3 [HRB] of hardness, and 500 [MPa] of tensile strength after T6 heat treatment.

• Food Science and Biotechnology
• /
• 제14권5호
• /
• pp.561-565
• /
• 2005

In this study, we attempted to assess the effects of lactate and com steep liquor (CSL) on the production of bacterial cellulose (BC) by Gluconacetobacter persimmonis $KJ145^T$. The optimal condition for the production of BC was a lactate concentration of 1% (w/v) and a CSL concentration of 10% (w/v). Under these optimal conditions, 6 days of fermentation produced 6.90 g/L of BC. Both the BC production yield and cell growth increased continuously until the 20th day of fermentation, by which time 17.0 g/L had been produced. In a static culture trial, in which plastic containers were used as fermentation chambers for 6 days of fermentation, the BC production yield in the group initially cultured with 500 mL medium was higher than that of the 750 and 1000 mL media. In addition, the texture of the BC was examined according to its post-treatment in order to determine conditions for optimal textural characteristics. The strength, hardness, and other characteristics of the BC were negatively correlated with sucrose concentration, but were largely positively correlated with NaCl concentration. With regards to the effect of pH on textural change, BC strength and hardness were elevated at pH 2 and 8 but reduced at pH 4 and 6, indicating that the texture of the BC is extremely sensitive to treatment conditions.

• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.9-14
• /
• 2014

Fenton reaction with zerovalent iron (ZVI) and $Fe^{2+}$ ions was studied to treat pharmaceutical wastewaters (PhWW) including antibiotics and non-biodegradable organics. Incremental biodegradability was assessed by monitoring biochemical oxygen demand (BOD) changes during Fenton reaction. Original undiluted wastewater samples were used as collected from the pharmaceutical factory. Experiments were carried out to obtain optimal conditions for Fenton reaction under different $H_2O_2$ and ion salts (ZVI and $Fe^{2+}$) concentrations. The optimal ratio and dosage of $H_2O_2$/ZVI were 5 and 25/5 g/L (mass basis), respectively. Also, the optimal ratio and dosage of $H_2O_2/Fe^{2+}$ ions were 5 and 35/7 g/L (mass basis), respectively. Under optimized conditions, the chemical oxygen demand (COD) removal efficiency by ZVI was 23% better than the treatment with $Fe^{2+}$ ion. The reaction time was 45 min for ZVI and shorter than 60 min for $Fe^{2+}$ ion. The COD and total organic carbon (TOC) were decreased, but BOD was increased under the optimal conditions of $H_2O_2$/ZVI = 25/5 g/L, because organic compounds were converted into biodegradable intermediates in the early steps of the reaction. The BOD/TOC ratio was increased, but reverse-wise, the COD/TOC was decreased because of generated intermediates. The biodegradability was increased about 9.8 times (BOD/TOC basis), after treatment with ZVI. The combination of chemical and biological processes seems an interesting combination for treating PhWW.

• Asian Journal of Atmospheric Environment
• /
• 제10권4호
• /
• pp.190-196
• /
• 2016

The objective of this study is to obtain the optimal conditions to remove hydrogen fluoride (HF) generated from a variety of F-gas treatment processes. First, we selected $Ca(OH)_2$ and $CaCO_3$ as a reactant among the various alkali salts which have a high removal efficiency and a competitive price by forming a calcium fluoride precipitate. Additionally, various factors were investigated to improve the removal efficiency of HF. The conditions such as the settling time, agitating time and intensity, reaction temperature, and pH were considered as main factors. As a result, in the treatment process to remove HF through Ca-based alkali salts, the optimal conditions were a 120 min settling time, 30 min of agitation at 100 rpm, a pH of 4-8, and a reaction temperature of $40^{\circ}C$.

• 한국환경과학회지
• /
• 제22권10호
• /
• pp.1353-1361
• /
• 2013

The objectives of this paper are the characterization of the pretreatment of wastewater by microfiltration (MF) membranes for river maintenance and water recycling. This is done by investigation of the proper coagulation conditions, such as the types and doses of coagulants, mixing conditions (velocity gradients and mixing periods), pH, etc., using jar tests. The effluent water from a pore control fiber (PCF) filter located after the secondary clarifier at Kang-byeon Sewage Treatment Plant (K-STP) was used in these experiments. Two established coagulants, aluminum sulfate (Alum) and poly aluminum chloride (PAC), which are commonly used in sewage treatment plants to treat drinking water, were used in this research. The results indicate that the optimal coagulation velocity gradients (G) and agitation period (T) for both Alum and PAC were 200-250 $s^{-1}$ and 5 min respectively, but the coagulation efficiencies for both Alum and PAC were lower at low values of G and T. For a 60 min filtration period on the MF, the flux efficiencies ($J/J_0$ (%)) at the K-STP effluent that were coagulated by PAC and Alum were 92.9 % and 79.9 %, respectively, under the same coagulation conditions. It is concluded that an enhanced membrane process is possible by effective filtration of effluent at the K-STP using the coagulation-membrane separation process.

• 한국수소및신에너지학회논문집
• /
• 제31권6호
• /
• pp.546-552
• /
• 2020

In this study, optimization research was conducted through statistical analysis with the aim of maximizing the efficiency of organic matter reduction and hydrogen production by applying electrolysis process at sewage treatment plant. Statistical analysis and optimal operating conditions of organic matter removal efficiency and H2 generation, which varied with various conditions in the electrolysis process, were derived using response surface methodology. As a result, 1,268 μS/cm of conductivity, 350 A current, and pH 3.2 was found to be the optimum condition to reach the desired value as 38% of organic matter reduction and 2.58 L/min of H2 production. The experiment also determined that the optimization study was reliable. Base on this study, it was confirmed that the removal of organic matter and hydrogen production could be stably by applying the electrolysis process in the sewage treatment plant.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.76-85
• /
• 2013

This study was carried out to investigate the relation between surface roughness and heat absorption capability of materials for solar collector. For this purpose, 3 kinds of materials (copper, aluminum, iron), 5 kinds of surface roughness (scrubber, alumina sand #80, #200, #400, glass bead) and 2 kinds of surface treatment (black chrome plating, copper black coating) were used for finding optimal conditions to apply solar collector. As the results, it was confirmed that the optimal relations between surface roughness and surface treatment as well as optimal materials were necessary. Further, heat absorption capability was showed good results in cases of copper materials, glass bead and black chrome plating.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.781-790
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. Many of the problems occurring in the GAC process are associated with the operation goal and performance. The purpose of this study were to evaluate the design, operation, and performance of granular activated carbon process in D water treatment plant. The optimal operation conditions of GAC process such as backwashing condition, granular activated carbon replacement time were discussed. The design, operation and performance of GAC process is influenced by their raw water characteristics and placement within the treatment process sequence. A critical analysis of plants experience and the information from the literature identifies the effectiveness of GAC process and indicates where modifications in design and operation could lead to improved performance. It would be useful to evaluate and optimize the GAC process in other treatment plant.

• 한국염색가공학회지
• /
• 제12권2호
• /
• pp.96-102
• /
• 2000

For the effective treatment of dyeing-complex wastewater, the most effective chemical coagulation method was studied. For the chemical coagulation of dyeing-complex wastewater, polyferric sulfate, $4Al_2(SO_4)_3$, PAC, ferrous sulfate, ferric sulfate, $FeCl_2$ and lime were used. It was investigated that polyferric sulfate was the most efficient coagulant. The optimal conditions and results for polyferric sulfate include the followings. When initial $COD_{Mn}$ concentration was 600mg/L, the optimal initial pH, dosage of coagulant, dosage of lime and PAA for $COD_{Mn}$ removal efficiency were 5, 1,200mg/L, 500mg/L and lmg/L, respectively. The optimal dosage of polyferric sulfate was increased proportionally to the influent $COD_{Mn}$ concentration.