• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.87-94
• /
• 2016

This paper proposes an energy transmission method to maximize energy efficiency of a based station. This method makes use of classification of service type to solve an inefficient use of transmission power, which is from exponential relationship between the legacy data throughput and transmission power. The proposed one is a way to find the most energy-efficiency points with the transmitted optimal amount of data on users in a base station of wireless network environment. For this, we propose EETA (Energy-Efficient Transmission Algorithm) which can control the amount of data and the holding time at the base station. As a result, the proposed method can improve the energy efficiency of about 10% compared to the legacy base station.

• International Journal of Automotive Technology
• /
• v.1 no.1
• /
• pp.42-47
• /
• 2000

This paper concentrates on the design and construction aspects of a transmission for a mid-class passenger car with internal combustion engine. The transmission, consisting of a Continuously Variable Transmission (CVT) with a Van Doorne V-belt, a planetary gear set and a compact steel flywheel is used to prove the concept of mechanical torque assist. The design goal is to obtain a proof of concept transmission with maximal efficiency, using proven transmission technology. With the developed so called Zero Inertia CVT, the fuel economy of the car is improved by operating the engine at its fuel optimal operating line. To achieve a good vehicle acceleration response, the flywheel assists the powertrain mechanically.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.571-579
• /
• 2013

This paper proposes an energy-efficient mode selection and power allocation scheme in device-to-device (D2D) communication system as an underlay coexistence with cellular networks. We analyze the energy efficiency which is defined as the summation of the energy efficiencies for all devices. The proposed scheme consists of two steps. First, we calculate the transmission power maximizing the energy efficiency for all possible modes of each device. Although the proposed power cannot maximize the system capacity, we prove that the proposed transmission power is the optimal power which maximizes the energy efficiency. In the second step, we select a mode which has the maximal energy efficiency among all possible mode combinations of the devices. Then we can jointly obtain the transmission power and the mode which can maximize the energy efficiency. The proposed scheme has the optimal performance with respect to the energy efficiency and outperforms the conventional schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.12
• /
• pp.3071-3095
• /
• 2013

Configuring optimization of wireless sensor networks, which can improve the network performance such as utilization efficiency and network lifetime with minimal energy, has received considerable attention in recent years. In this paper, a cross layer optimal approach is proposed for multi-source linear network and grid network under Rayleigh block-fading channels, which not only achieves an optimal utility but also guarantees the end-to-end reliability. Specifically, in this paper, we first strictly present the optimization method for optimal nodal number $N^*$, nodal placement $d^*$ and nodal transmission structure $p^*$ under constraints of minimum total energy consumption and minimum unit data transmitting energy consumption. Then, based on the facts that nodal energy consumption is higher for those nodes near the sink and those nodes far from the sink may have remaining energy, a cross layer optimal design is proposed to achieve balanced network energy consumption. The design adopts lower reliability requirement and shorter transmission distance for nodes near the sink, and adopts higher reliability requirement and farther transmission distance for nodes far from the sink, the solvability conditions is given as well. In the end, both the theoretical analysis and experimental results for performance evaluation show that the optimal design indeed can improve the network lifetime by 20-50%, network utility by 20% and guarantee desire level of reliability.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.199-206
• /
• 2008

The introduction of competition in electricity markets emphasizes the importance of sufficient transmission capacities to guarantee effective power transactions. Therefore, for the economic and stable electric power system operation, transmission security constrains should be incorporated into the dispatch scheduling problem. With the intent to solve this problem, we decompose a dispatch scheduling problem into a master problem(MP) and several subproblems(SPs) using Benders decomposition. The MP solves a general optimal power flow(OPF) problem while the SPs inspect the feasibility of OPF solution under respective transmission line contingencies. If a dispatch scheduling solution given by the MP violates transmission security constraints, then additional constraints corresponding to the violations are imposed to the MP. Through this iterative process between the MP and SPs, we derive an optimal dispatch schedule incorporating the post-contingency corrective rescheduling. In addition, we consider interruptible loads as active control variables since the interruptible loads can participate as generators in competitive electricity markets. Numerical examples demonstrate the efficiency of the proposed algorithm.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.299-310
• /
• 2016

In practical wireless relay communication systems, non-destination nodes are assumed to be idle not receiving signals while the relay sends messages to a particular destination node, which results in reduced bandwidth efficiency. To improve the bandwidth efficiency, we relax the idle assumption of non-destination nodes and assume that non-destination nodes may receive signals from sources. We note that the message relayed to a particular node in such a system gives rise to interference to other nodes. To study such a more general relay system, we consider, in this paper, a relay system in which the relay first listens to the source, then routes the source message to the destination, and finally produces interference to the destination in sending messages for other systems. We obtain capacity upper and lower bounds and study the optimal method to deal with the interference as well as the optimal routing schemes. From analytic results obtained, we find the conditions on which the direct transmission provides higher transmission rate. Next, we find the conditions, by numerical evaluation of the theoretical results, on which it is better for the destination to cancel and decode the interference. Also we find the optimal source power allocation scheme that achieves the lower bound depending on various channel conditions. We believe that the results provided in this paper will provide useful insights to system designers in strategically choosing the optimal routing algorithms depending on the channel conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4087-4102
• /
• 2014

Two-way relaying is an effective way of improving system spectral efficiency by making use of physical layer network coding. However, energy efficiency in OFDM-based bidirectional relaying with asymmetric traffic requirement has not been investigated. In this study, we focused on subcarrier transmission mode selection, bit loading, and power allocation in a multicarrier single amplified-and-forward relay system. In this scheme, each subcarrier can operate in two transmission modes: one-way relaying and two-way relaying. The problem is formulated as a mixed integer programming problem. We adopt a structural approximation optimization method that first decouples the original problem into two suboptimal problems with fixed subcarrier subsets and then finds the optimal subcarrier assignment subsets. Although the suboptimal problems are nonconvex, the results obtained for a single-tone system are used to transform them to convex problems. To find the optimal subcarrier assignment subsets, an iterative algorithm based on subcarrier ranking and matching is developed. Simulation results show that the proposed method can improve system performance compared with conventional methods. Some interesting insights are also obtained via simulation.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1420-1430
• /
• 2011

This paper proposes a new method to optimize energy consumption in a wireless modem by setting up a transmission power value according to the distance between nodes and circumstance in the MAC layer of IEEE 802.15.4. The proposed method can dynamically find an optimal transmission power range using the binary search scheme and minimize overhead caused by multiple message transmissions when determining the optimal transmission power. The determined transmission power is used for transmitting data packets and can be modified dynamically depending on the changes in a network environment when exchanging data packets and acknowledgement signals. The results of the simulations show 30% reduction in energy consumption while 2.5 times increase in data transmission rate per unit of energy comparing with IEEE 802.15.4 standard.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2098-2117
• /
• 2012

This paper jointly investigates the bandwidth allocation, transmission strategy and relay positions for two-way transmission aware cellular networks with network coding (NC). Our goal is to minimize the transmission power of mobile terminals (MTs). Consider a cellular system, where multiple MTs exchange information with their common base station, firstly, we propose an efficient bandwidth allocation method and then give a transmission strategy for each MT to determine whether to use relay stations (RSs) for its two-way transmission with the BS or not. To further improve the system performance, the optimal positions of RSs are also jointly discussed. A GA-based algorithm is presented to obtain the optimum positions for RSs. Besides, the impacts of frequency reuse on MT's transmission power and system spectral efficiency (SE) under different number of relays are also discussed in our work. Numerical results show that the proposed NC aware scheme can extend MTs' battery life at least 6% more than traditional method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3399-3419
• /
• 2020

In the Vehicular Ad-hoc Network (VANET), the data transmission of time-sensitive applications requires low latency, such as accident warnings, driving guidance, etc. However, frequent changes of topology in VANET will result in data transmission failures. In order to improve the efficiency of VANETs data transmission and increase the timeliness of data, this paper proposes a relay scheme based on Recurrent Neural Network (RNN) trajectory prediction, which can be used to select the optimal relay vehicle to transmit data. The proposed scheme learns vehicle trajectory in a distributed manner and calculates the predicted trajectory, and then the optimal vehicle can be selected to complete the data transmission, which ensures the timeliness of the data. Finally, we carry out a set of simulations to demonstrate the performance of the algorithm. Simulation results show that the proposed scheme enhances the timeliness of the data and the accuracy of the predicted driving trajectory.