• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3642-3646
• /
• 2012

본 논문에서는 광통신시스템에서 사용되는 필터의 대역폭과 시스템의 에러 확률과의 상관관계에 대해 연구를 수행하였다. 이를 위하여 전치증폭시스템에서 발생하는 에러확률을 수신기의 감도에 관한 함수로 나타내었으며 수신기 감도를 다양한 에러 확률에 대해 계산을 수행하였다. 또한 다양한 에러확률에 대한 채널당 데이터 전송률의 함수의 변화에 대한 수신기 필터의 최적의 대역폭을 계산하였는데, 같이 최적 상태에서 동작하기 위해 필요한 필터의 대역폭 범위는 채널당 데이터 전송율이 1에서 10Gb/s의 범위일 때, 0.2에서 3.5nm 사이이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.618-620
• /
• 1998

We implemented PanelLink flat panel display receiver which can be used for testing SXGA($1280{\times}1024$) TFT LCD panel. We've got optimal analog input voltage to get stable image according to cable length. And we commented the way to reduce EMI.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권1호
• /
• pp.19-29
• /
• 2019

This paper analyzes the design factors for GNSS anti-jamming receiver system in which the adaptive beamforming algorithm is applied in GNSS receiver system. The design analysis factors used in this paper are divided into three: antenna, beamforming algorithm, and operation environment. This paper analyzes the above three factors and presents numerical simulation results on antenna and beamforming algorithm.

• Journal of information and communication convergence engineering
• /
• 제19권3호
• /
• pp.161-165
• /
• 2021

Since the first commercialization of beacon-based services in 2011, various services have been provided to improve Bluetooth performance, and research has been conducted to accurately recognize user locations using beacons. The various measurement methods of indoor positioning systems (IPS) include methods using receiver signal strength indicator (RSSI) the strength of which varies greatly in accuracy depending on whether there are obstacles such as cement walls or doors. In this paper, we present a method to provide accurate positioning services even in the presence of obstacles in indoor spaces. To this end, we connect the HM-10 module supporting the beacon with Arduino Uno, to place beacons in three directions in real-world indoor space, and derive an optimal trilateration equation. Based on the derivation, we select the optimal expression for calculating the distance between the beacon and the moving station and use it to verify the coordinate determination for the moving station.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.394-396
• /
• 2006

When developing a new GPS receiver module, the essential problems are evaluation of reliable algorithms, software debugging, and performance comparison between algorithms to find optimal solution. Most GPS receiver modules nowadays use a correlator to track signals from satellites and an MCU (Micro Controller Unit) to control operations of the entire module. The problem of software evaluation from MCU is very difficult, due to limitation of MCU resources and low ability of interfacing with user. Normally, user has to expense special tool kit for a limiting access to MCU but it is also hard to use. This article introduces an implementation of a GPS receiver test bed using correlator GP2021 interfacing with ISA (Industry Standard Architecture) PC bus. This way can give user complete control and visibility into the operation of the receiver, then user can easily debug program and test algorithms. For this article, the least square method is implemented to test the hardware and software performance.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3174-3182
• /
• 1996

본 논문에서는 시간 선택성 다경로 페이딩 채널 상에서 OFDM(orthogonal frequency division multiplexing) 신호를 수신할 수 있는 수신기를 제안하였다. 최적 수신을 위하여 LMLE(linear maximum likelihood estimation) 알고리듬을 이용하여 OFDM demultiplexing 신호로부터 실제 전송된 심볼을 추정하였다. 또한 테일러 근사를 이용하여 비트 오류 확률의 하한을 해석적으로 구하였다. 시간 선택성 페이딩 채널 상에서 OFDM신호를 matched 필터로 수신하는 경우에는 인접 채널간의 cross-talk 현상으로 인하여 $10^{-1}$ 이하의 에러율을 얻을 수 없으나, 본 논문에서 제안하는 수신기를 사용하는 경우에는 15dB의 SNR에서 $10^{-4}$ 정도의 에러율을 얻을 수 있다. 또한, 제안하는 수신기는 subchannel의 수와 채널의 경로의 증가에 따른 성능저하가 거의 나타나지 않음을 확인 할 수 있었다.

• International Journal of Railway
• /
• 제4권1호
• /
• pp.12-18
• /
• 2011

The ATS system is used to provide wayside signaling. Currently, the oscillation frequency is set at 78[kHz] in the normal state. As the on-board receiver crosses over the wayside transmitter, the oscillation frequency is changed by capacitors of the wayside transmitter in a manner dependent on the train speed. As the oscillation frequency is changed, the waveform is modified in the wayside transmitter as well as in the on-board receiver. When there are other signal systems such as a ATO system present near the wayside transmitter, frequency interference occurs. This phenomenon arises since other signals or communication frequencies present will be included in the waveform. Trains often stop due to these other frequencies included in the waveform. In this paper, a model of the interaction between the wayside transmitter and on-board receiver is suggested and frequency response in the wayside transmitter and on-board receiver in the presence of the other signals are estimated by the coupling coefficient. Also, the coupling coefficients are estimated, and the optimal value is proposed.

• Journal of Communications and Networks
• /
• 제6권1호
• /
• pp.26-34
• /
• 2004

A blind interference canceller in the presence of subchipspaced multipath channels for direct-sequence code division multiple access (DS-CDMA) down-link system is considered. This technique is based on combining the existing blind interference canceller with a technique that involves assigning subchip-tap spacing to the Rake receiver. The proposed receiver minimizes the receiver’s output energy subject to a constraint in order to mitigate the multiple access interference (MAI) along each multipath component, and then suboptimally combining all the multipath components. Moreover, it is able to mitigate the mismatch problem when subchip-spaced multipath components arrive at the blind interference canceller. It is known that optimal combining techniques perform a decorrelation operation before combining, which requires both knowledge and computational complexity. In the following, we have adopted a simpler but suboptimum approach in the combining of the suppressed signals at the output of our proposed receiver. Computer simulation results verify the effectiveness of the proposed receiver to handle subchip-spaced multipath components and still suppresses MAI significantly.

• 한국인터넷방송통신학회논문지
• /
• 제12권2호
• /
• pp.215-220
• /
• 2012

무선 Ad-Hoc 네트워크는 전력제한을 갖기 때문에 네트워크의 소모 전력을 최소화 하는 것이 최근의 연구 주제 중 하나이다. 본 논문은 최근에 제안된 수신가지 수가 제한된 이중기회전송 릴레이 시스템의 전력 소모를 줄이고, 시스템의 성능을 개선하기 위하여 각 송신 노드의 최적 전력 분배방식을 제안하고 시스템의 성능을 유도하였다. 분석결과 각 송신 노드가 동일한 전력으로 송신할 경우보다 각 송신노드에 최적의 전력을 할당한 경우가 오수신율이 항상 우수함을 보였고, 또한 평균 채널전력 이득이 작을 경우 평균 송신 릴레이 수를 증가시켜 다이버시티 이득을 크게 함으로써 오수신율을 최소화 하는 것을 알 수 있었다.

• Parasites, Hosts and Diseases
• /
• 제45권3호
• /
• pp.239-243
• /
• 2007

Many allergists are currently focusing on the development of new diagnostic tools, and are attempting to improve both the sensitivity and specificity. A multiple allergen simultaneous test-chemiluminescent assay (MAST-CLA) is one of the most popular diagnostic tools used in the Republic of Korea. However, there remains controversy among allergists with regard to the cut-off point for a positive result. The present study was conducted in order to determine the validity of MAST-CLA as compared with that of the skin prick test, with particular emphasis on arthropod allergens, on the basis of percentage agreement rates and k-values, and also to suggest the optimal positive cutoff points using receiver operating characteristic (ROC) curves. The study was conducted with 97 subjects (54 men, 43 women). Optimal individual cut-off points were calculated as follows; class II for Dermatophagoides farinae, class I for Dermatophagoides pteronyssinus, and trace for a cockroach mix. These findings suggest that attempting to apply optimal individual cut-off points will be a good way of improving diagnostic tests, particularly MAST-CLA.