• Journal of Hospice and Palliative Care
• /
• v.20 no.3
• /
• pp.167-172
• /
• 2017

End-stage liver disease (ESLD) is a terminal condition of cirrhosis which cannot be treated without liver transplantation. Thus, it is natural for patients to consider hospice/palliative care (HPC). Since the recent legislation of the Act on Decisions on Life-Sustaining Treatment for Patients in Hospice and Palliative Care or at the End of Life (Act No. 14013) in Korea, the practicality of this law has become an issue. The criteria for HPC should be defined with consideration to how the severity of each ESLD complication may vary by individual patients. Generally, patients qualify if they have an intractable condition despite aggressive treatment such as the hepatorenal syndrome, hepatic encephalopathy or variceal hemorrhage. However, the option of liver transplantation should be sufficiently discussed with patients and their families before making a decision on HPC. The evaluation of which ESLD patients should receive HPC should be based on a long-term doctor-patient relationship and sufficient objective data. Therefore, a multidisciplinary approach and mutual consultation among cirrhosis specialists and doctors with other expertise are essential to offer optimal and balanced treatments between liver-specific treatment and HPC. Discussed in this review are adequate criteria for HPC and special considerations for ESLD at the point of HPC.

• Journal of Life Science
• /
• v.19 no.2
• /
• pp.256-263
• /
• 2009

The lactate dehydrogenase (EC 1.1.1.27, LDH) $A_4$ isozyme in skeletal muscle of mandrin fish (Siniperca scherzeri) was successfully purified by affinity chromatography and ultrafiltration. The molecular weight of the purified LDH $A_4$ isozyme was 140.4 kDa and its isoelectric point (pI) was 7.0. Optimal pH for enzymatic reaction was 7.5. ${K_m}^{PYR}$ and $V_{max}$ value of the purified LDH $A_4$ isozyme were $4.86{\times}10^{-5}$ M and 13.31 mM/min using pyruvate as a substrate, respectively. These kinetic properties of the purified LDH $A_4$ isozyme supported the fact that the mandrin fish was a warm-adapted species. The antibody against the purified LDH $A_4$ isozyme may be used in the metabolic physiological studies of ectothermic vertebrates and in the diagnosis of several human diseases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.53-62
• /
• 1987

High power lasers provide a controllable and precise energy source in surface transformation hardening. A careful control of the process is needed in order that the surface layer of the material reaches the austenizing temperature, but that it does not melt. In order to achieve this the results of theoretical and experimental studies on the laser surface hardening of a medium carbon steel are described. A two-dimensional computer program, which can be used generally for the determination of transient temperature distributions in welding and heat treatment, was established on the basis of the finite element method. For the confirmation of the accuracy of the numerical analysis, a medium carbon steel (SM 45C) of 5mm thickness was heat-treated with a 1kW CW CO$_{2}$ laser machine, while the traverse speed and the distance from the focal point (defocused distance) were varied. Experimental and numerical results showed a similar tendency in correlations between the hardened zone shape and the process parameters. With increasing beam spot diameter the width and depth of the hardened zone increased for relatively small beam spot diameters, but decreased rapidly after reaching the maximum value, while with increasing traverse speed the width and depth of the hardened zone decreased monotonously. Too small beam spot diameters are to be avoided, since the surface melting would lower the surface hardness and produce an uneven surface which may be unacceptable because of the possible requirement for subsequent machining. It could be observed that for a given traverse speed and laser power input there exists a optimal range of the beam spot diameter, which produce a large width of the hardened zone but no melting on the surface.

• Biomedical Science Letters
• /
• v.11 no.1
• /
• pp.63-69
• /
• 2005

We investigated the changes of fibrinolytic and antioxidative activities of wild or cultivated Codonopsis lanceolata, which were packed in woven polypropylene (WP) film or low density polyethylene (LDPE) film and stored for 0, 15, and 30 days at refrigerated $(2\~4^{\circ}C)$ or room $(l8\~20^{\circ}C)$ temperature (So we have 16 samples, and wrote them as the abbreviated words such as W-WP-RE-15, W-WP-RO-15, W-LDPE-RE-15, W-LDPE-RO-15, W-WP-RE-30, W-WP-RO-30, W-LDPE-RE-30, W-LDPE-RO-30, C-WP-RE-15, C-WP-RO-15, C-LDPE-RE-15, C-LDPE-RO-15, C-WP-RE-30, C-WP-RO-30, C-LDPE-RE-30, C-LDPE-RO-30). Fibrinolytic activity of fresh Codonopsis lanceolata cultivated in the mountain or field were 0.8 unit (plasmin unit/ml) or 7.3 units, respectively. In descending order, the activities of wild Codonopsis lanceolata stored for 15 days were as followed; LDPE-RE (0.70 unit), WP-RO (0.52 unit), WP-RE (0.45 unit), and LDPE-RO (0.30 unit). After 30 days, fibrinolytic activities of them decreased to 0.47 unit (LDPE-RE), 0.28 unit (WP-RO), 0.21 unit (WP-RE), and 0.30 unit (LDPE-RO). Considering from the point of fibrinolytic activity, the optimal storage condition of wild Codonopsis lanceolata was packing with LDPE film and storing at $4^{\circ}C$. The change of fibrinolytic activities of Codonopsis lanceolata cultivated in the field revealed the similar trend as wild samples, but the fibrinolytic activities of 30 days-stored samples were maintained better than the wild Codonopsis lanceolata. Fibinolytic activity of wild Codonopsis lancealata was increased by heating for 5 min at $100^{\circ}C$ and decreased by addition of NaCl. Antioxidative activities of Codonopsis lanceolata were also compared from the electron donating activity. Fresh Codonopsis lanceolata had about $70\%$ of electron donating activity. Independent of cultivation area, electron donating activity dropped to $19\~74\%$ (wild Codonopsis lanceolata) and $27\~59\%$ (cultivated Codonopsis lanceolata) during 15 days storage. But after 30 days storage, we obtained the unexpected results, which meant that the activities were higher activities than 15 days-stored samples or even though the fresh samples. In general, Codonopsis lanceolata could maintain antioxidative activities most strongly with LDPE film and chilled condition.

• Archives of design research
• /
• v.16 no.4
• /
• pp.289-298
• /
• 2003

The 21st century could be called the age of Experience Economy associated with the importance to external and internal experience of product users. It needs the understanding of customer's needs in new point of view. In the area of design development, it requires the extensive application of experience from traditional method that was based on the style and usability to more advanced concept. To correspond to these changes, we need to explore new customer's value system for knowledge-information design and systematic approaches to experience system. The purpose of this research is to define the concept of 'experience' newly in the importance side of customer's life, form a clear definition of experience design and present the model of application system. Theoretical frameworks of this research are based on the Empiricism and John Dewey's theory. By applying these frameworks make dear the concept of experience concept and reanalysis the meaning and style in the perspective of design. In this process, we can extract the main factors that inducing the experience, create new application system and model again to the field of design. Application model can creates various experiences through supplying different experience style and factors for customer, make customer realize experience object. Experience designs offer optimal experience to users by making a plan and design experience to user's goal.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.1
• /
• pp.9-18
• /
• 2015

Software Reliability Growth Models (SRGMs) are useful for determining the software release date or additional testing efforts by using software failure data. It is not appropriate for a SRGM to apply to all software. And besides a large number of SRGMs have already been proposed to estimate software reliability measures. Therefore selection of an optimal SRGM for use in a particular case has been an important issue. The existing methods for selecting a SRGM use the entire collected failure data. However, initial failure data may not affect the future failure occurrence and, in some cases, it results in the distorted result when evaluating the future failure. In this paper, we suggest a method for selecting a SRGM based on the evaluation goodness-of-fit using partial data. Our approach uses partial data except for inordinately unstable failure data in the entire failure data. We will find a portion of data used to select a SRGM through the comparison between the entire failure data and the partial failure data excluded the initial failure data with respect to the predictive ability of future failures. To justify our approach this paper shows that the predictive ability of future failures using partial data is more accurate than using the entire failure data with the real collected failure data.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.2
• /
• pp.17-40
• /
• 2007

Most research on web site design has focused on technological factors, while visual aesthetic factors have been considered less important. In contrast, this study focuses on visual aesthetic factors in web site design. Findings of this study can be summarized as follows : (1) The result of SPSS-factor analysis shows that there are 3 distinct factors, 'classical aesthetics', 'expressive aesthetics', and 'usability' 'Classical aesthetics' and 'expressive aesthetics' can be described by visual aesthetic design, 'Visual aesthetic design' can be distinguished from 'usability'. This conceptual confusion relating to 'usability' and 'visual aesthetic design' can be clarified by these findings. (2) As a result of multiple regression analyses, 'classical aesthetics', 'expressive aesthetics', and 'usability' have a positive influence on 'interactivity' and 'web site evaluation'. This research clarifies the concepts of 'expectations' of Grier [18] and 'engagement' of Rosen and Purinton [33] as the 'interactivity' between users and web sites. Furthermore, this research suggests a valid model with high $R^2$(interactivity, 48% : web site evaluation, 68%). (3) Empirical tests show that the differences among users in 'entry point' are related to the characteristics of web sites and the personal characteristics of users. The differences among users in terms of 'scanning time' are closely related to the attitudes and evaluation tendencies of users with respect to web sites. These findings could contribute to the 'search phase' of the Faraday model [16], enabling it to be more precise and extensible. The managerial implication of this study is that customers' preferences regarding web site designs are differences, as their preferences are based on their individual characteristics. Therefore, marketing managers should consider promotional tools on web sites that are relevant to the target market. An optimal strategy for web design could be a carefully-selected combination of factors that are relevant to the 'interactivity' and 'evaluation' of web sites. Additionally, if marketing managers want to attract more favorable attitudes and more affirmative evaluations from users, web sites should be designed so that they are understood more quickly by users. finally, this study suggests that 'good design' for web sites depends on understanding how to attain the appropriate balance between 'classical aesthetics' and 'expressive aesthetics', based on the target customer.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.46-53
• /
• 2018

This study was conducted to determine which greenhouse provided good environmental conditions for strawberry production, and performed better at conserving energy. Temperature, RH, VPD, $CO_2$, solar radiation, yield, and fuel consumption were the parameters analyzed. The temperatures of both greenhouses were well controlled in order to provide optimal day and night temperatures for strawberry production. The air inflated double layer greenhouse had higher RH values (more than 90% at night), which led to higher disease occurrence, in comparison to the conventional double layer greenhouse. Furthermore, the air inflated double layer greenhouse had lower VPD values than the conventional double layer greenhouse. Therefore, better RH and VPD were observed in the conventional double layer greenhouse. Higher $CO_2$ concentration was observed in the air inflated double layer greenhouse while the conventional double layer greenhouse ventilated better than the air inflated greenhouse, because of its side ventilators. Moreover, higher solar radiation in the conventional double layer greenhouse resulted in higher yield, in comparison to the air inflated double layer greenhouse. Thus, we can conclude that the conventional double layer greenhouse provided a better environment for crop growth, in comparison to the air inflated double layer greenhouse. Regarding fuel consumption, the air inflated double layer greenhouse had lower fuel consumption than the conventional double layer greenhouse. Therefore, from an energy consumption point of view, we can conclude that the air inflated double layer greenhouse performed better than the conventional double layer greenhouse.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1029-1036
• /
• 2014

Several types of automatic 3D scanners are available for use in the 3D scanning industry, e.g., an automatic 3D scanner that uses a robot arm and one that uses an automatic rotary table. Specifically, these scanners are used to obtain a 3D shape using automatic assisting devices. Most of these scanners are required to perform numerous operations, such as merging, aligning, trimming, and filling holes. We are interested in developing an automatic 3D shape collection device using a spherical-coordinate-based guiding system. Then, the aim of the present study is to design an automatic guiding system that can automatically collect 3D shape data. We develop a 3D model of this system and measuring data which are collected by a personal computer. An optimal design of this system and the geometrical accuracy of the measured data are both evaluated using 3D modeling software. The developed system is then applied to an object having a highly complex shape and manifold sections. Our simulation results demonstrate that the developed system collects higher-quality 3D data than the conventional method.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.177-183
• /
• 2012

Purpose: In near infrared spectroscopy, interactance configuration of a light source and a spectrometer probe can provide more information regarding fruit internal attributes, compared to reflectance and transmittance configuration. However, there is no through study on the parameters of interactance measurement setup. The objective of this study was to investigate the effect of the parameters on the estimation of soluble solids content (SSC) and firmness of muskmelons. Methods: Melon samples were taken from greenhouses at three different harvesting seasons. The prediction models were developed at three distances of 2, 5, and 8 cm between the light source and the spectrometer probe, three measurement points of 2, 3, and 6 evenly distributed on each sample, and different number of fruit samples for calibration models. The performance of the models was compared. Results: In the test at the three distances, the best results were found at a 5 cm distance. The coefficient of determination ($R_{cv}{^2}$) values of the cross-validation were 0.717 (standard error of prediction, SEP=$1.16^{\circ}Brix$) and 0.504 (SEP=4.31 N) for the estimation of SSC and firmness, respectively. The minimum measurement point required to fully represent the spectral characteristics of each fruit sample was 3. The highest $R_{cv}{^2}$ values were 0.736 (SEP=$0.87^{\circ}Brix$) and 0.644 (SEP=4.16 N) for the estimation of SSC and firmness, respectively. The performance of the models began to be saturated when 60 fruit samples were used for developing calibration models. The highest $R_{cv}{^2}$ of 0.713 (SEP=$0.88^{\circ}Brix$) and 0.750 (SEP=3.30 N) for the estimation of SSC and firmness, respectively, were achieved. Conclusions: The performance of the prediction models was quite different according to the condition of interactance measurement setup. In designing a fruit grading machine with interactance configuration, the parameters for interactance measurement setup should be chosen carefully.