• 한국동물위생학회지
• /
• 제40권4호
• /
• pp.253-258
• /
• 2017

The aim of this study is to develop an optimal analytical method for gonadorelin, progesterone, oxytocin and estradiol, the major components of hormones. A relatively simple and reproducible method using high performance liquid chromatography was developed and as a result of the measurement of specificity, linearity, repeatability, accuracy and intermediated precision, the validity of the developed method was verified with the result of meeting the verification criteria of analytical method validation. Using this newly developed method, 12 post-market veterinary products were tested and the ingredient content were 91.9~116.4%, which satisfied the 90~120% condition of the administrative measure standard. Therefore, if the newly developed method is used for the collection examination of hormone in veterinary medicine, it can be useful as an approved test method.

• 분석과학
• /
• 제10권3호
• /
• pp.216-224
• /
• 1997

순환 전압-전류 그림에서 루비안산의 전기화학적 행동을 조사해 보면, 루비안산은 두 개의 환원 봉우리가 나타나는데, 첫번째 봉우리는 $S^{2-}$ 봉우리와 일치하므로 HgS 생성에 의한 환원 봉우리이며, 두번째 봉우리는 매우 약하며 확인되지 않았다. 시차 펄스 음극 벗김 전압-전류법으로 미량의 루비안산을 정량하는 방법을 고찰하였다. 루비안산의 정량을 위하여 pH 10.0, 붕산염 완충용액을 사용하였고, 최적 조건은 붕산염 완충용액의 농도 0.05M, 축적전위 -0.30V, 축적시간 120초, 그리고 주사속도 10mV/sec이다. 이 때 루비안산의 검출 한계는 $2.7{\times}10^{-8}M$이다.

• 분석과학
• /
• 제6권5호
• /
• pp.425-433
• /
• 1993

oxine을 리간드로 이용하여 흡착벗김 전압전류법으로 극미량의 지르코늄을 정량하는 방법을 연구하였다. 이때 지지전해질은 $2.5{\times}10^{-3}M$ borax 완충용액을 사용하였고, oxine의 농도가 $4{\times}10^{-8}M$로 되도록 하여 실험하였다. accumulation potential을 -0.2V, accumulation time을 400sec로 하고 scan rate를 4mV/sec로 하여 실험한 결과 지르코늄의 농도가 $1{\sim}100{\mu}g/L$ 범위에서 얻은 검정곡선은 직선성을 나타내었다.

• 분석과학
• /
• 제36권4호
• /
• pp.152-160
• /
• 2023

Adenosine and cordycepin are bioactive compounds with health benefits. Therefore, both substances are often used to assess the quality of Cordyceps products. Optimization and validation of the HPLC/DAD method for determining two nucleosides were studied. The samples were prepared using an ultrasound-assisted extraction (ultrasonic bath). The result was optimal conditions for aqueous extraction, an extraction time of 35 min, and an extraction temperature of 40 ℃. The Chromatographic separation was achieved using a reverse phase column (InfinityLab Poroshell 120 EC-C18, 4.6 × 250 mm, 2.7 ㎛) at 30 ℃ with a mobile phase gradient elution of water and methanol at a flow rate of 0.7 mL/min. The eluents were monitored via a diode array detector at 260 nm. Two nucleosides were separated by less than 12 min after injection. The developed method was found to be excellent linear (r² > 0.9999), accurate (% recovery 95.34-98.51), and precise (% relative standard deviation < 2.0). The limit of detection (LOD) and quantification (LOQ) were 0.45 and 1.38 mg/mL for adenosine and 0.47 and 1.43 mg/mL for cordycepin, respectively. This method was satisfactory for simultaneously quantitating two nucleoside contents, which were used to evaluate Cordyceps products.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.990-996
• /
• 2008

Nowadays, the trend to a lightweight design accelerates the use of advanced high strength steel (AHSS) in automotive industry. Springback phenomena is a hot issue in the sheet metal forming, especially bending process using AHSS. Several analytical methods for that have been proposed in recent years. Each of method has their advantages and disadvantages. There are only a few optimal solutions which can minimize the two objectives simultaneously. In this study, an effective method optimized the multi objective value. The method by the design of experiments(DOE) and artificial neural network(ANN) was presented to compensate springback of bending parts. This method was applied to L and V bending process. The effective method could be optimized to multiple object. It was confirmed that the proposed method was more efficient than traditional manual FEA procedure and the trial and error approach for springback compensation.

• Tribology and Lubricants
• /
• 제36권2호
• /
• pp.96-104
• /
• 2020

The electric vehicle industry is rapidly developing because of enforced environmental regulations, and several studies have been conducted on the multispeed transmission to improve the fuel efficiency of electric vehicles. Among these studies, research on the power density improvement of electric vehicle transmission is critical. Thus, the optimal design of the gear train is necessary to enhance transmission efficiency. In this study, an optimal design methodology for the lightweight two-speed transmission of electric vehicles is proposed. Because a multispeed transmission has many operating conditions and equality and inequality constraints, a new gear design method that combines analytical and iterative methods is applied without using complex optimization algorithms. Sets of possible design variables are generated considering the operating conditions and various design variables. The modules and face width ratios of each stage gear that satisfy the corresponding operating conditions are analytically calculated. The volume of the gear train is calculated, evaluated, and arranged using these values to determine the optimal solution for minimizing the volume, and the proposed methodology is applied to the actual model to verify its effectiveness. The design of a two-speed transmission with multiple operating conditions and constraints without complicated optimization algorithms can be optimized.

• Steel and Composite Structures
• /
• 제42권4호
• /
• pp.489-499
• /
• 2022

This paper proposes a numerical optimization method to design the mesoscale architecture of textile composite for simultaneously enhancing mechanical and thermal properties, which compete with each other making it difficult to design intuitively. The base cell of the periodic warp and fill yarn system is served as the design space, and optimal fibre yarn geometries are found by solving the optimization problem through the proposed method. With the help of homogenization method, analytical formulae for the effective material properties as functions of the geometry parameters of plain-woven textile composites were derived, and they are used to form the inverse homogenization method to establish the design problem. These modules are then put together to form a multiobjective optimization problem, which is formulated in such a way that the optimal design depends on the weight factors predetermined by the user based on the stiffness and thermal terms in the objective function. Numerical examples illustrate that the developed method can achieve reasonable designs in terms of fibre yarn paths and geometries.

• 한국환경농학회지
• /
• 제39권3호
• /
• pp.246-252
• /
• 2020

BACKGROUND: Pesticides are broadly used to control weeds and pests, and the residues remaining in crops are managed in accordance with the MRLs (maximum residue limits). Therefore, an analytical method is required to quantify the residues, and we conducted a series of analyses to select and validate the quick and simple analytical method for tolpyralate in five agricultural products using QuEChERS (quick, easy, cheap, effective, rugged and safe) method and LC-MS/MS (liquid chromatography-tandem mass spectrometry). METHODS AND RESULTS: The agricultural samples were extracted with acetonitrile followed by addition of anhydrous magnesium sulfate, sodium chloride, disodium hydrogencitrate sesquihydrate and trisodium citrate dihydrate. After shaking and centrifugation, purification was performed with d-SPE (dispersive-solid phase extraction) sorbents. To validate the optimized method, its selectivity, linearity, LOD (limit of detection), LOQ (limit of quantitation), accuracy, repeatability, and reproducibility from the inter-laboratory analyses were considered. LOQ of the analytical method was 0.01 mg/kg at five agricultural products and the linearity of matrix-matched calibration were good at seven concentration levels, from 0.0025 to 0.25 mg/L (R²≥0.9980). Mean recoveries at three spiking levels (n=5) were in the range of 85.2~112.4% with associated relative standard deviation values less than 6.2%, and the coefficient of variation between the two laboratories was also below 13%. All optimized results were validated according to the criteria ranges requested in the Codex Alimentarius Commission (CAC) and Ministry of Food and Drug Safety (MFDS) guidelines. CONCLUSION: In conclusion, we suggest that the selected and validated method could serve as a basic data for detecting tolpyralate residue in imported and domestic agricultural products.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.150-157
• /
• 1997

Various analytical, empirical and theoretical methods for slope stability assessment were applied on slopes to develop aggregate quarry optimally. Among them are block theory, stereographic analysis, RMR, SMR, limit equilibrium method and maximum likelihood. Test site was estimated that slopes were apt to fail although rock quality was good. Modified direction and dip angle was suggested for stability. To reduce the overbreak and to improve the stability, the vertical blasting was recommended for new subground level.

• 대한산업공학회지
• /
• 제11권2호
• /
• pp.1-9
• /
• 1985

In this study, two stage transfer line with limited repair capability is modeled to formulate optimal dynamic repair priority policy. The method of Markov Chains is used to analyze the analytical model of this line. An efficient algorithm is developed, utilizing the block tridiagonal structure of the transition probability matrix, to obtain the steady state probabilities and system performance measures, such as the steady state production rate of the line and the average in-process inventory in the interstage buffer.