• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.637-640
• /
• 2005

In the development of a electronic system for a optical payload comprising mainly EOS(Electro-Optical Sub-system) and PDTS(Payload Data Transmission Sub-system), many aspects should be investigated and discussed for the easy implementation, for th e higher reliability of operation and for the effective ness in cost, size and weight as well as for the secure interface with components of a satellite bus, etc. As important aspects the interfaces between a satellite bus and a payload, and some design features of the CEU(Camera Electronics Unit) inside the payload are described in this paper. Interfaces between a satellite bus and a payload depend considerably on whether t he payload carries the PMU(Payload Management Un it), which functions as main controller of the Payload, or not. With the PMU inside the payload, EOS and PDTS control is performed through the PMU keep ing the least interfaces of control signals and primary power lines, while the EOS and PDTS control is performed directly by the satellite bus components using relatively many control signals when no PMU exists inside the payload. For the CEU design the output channel configurations of panchromatic and multi-spectral bands including the video image data inter face between EOS and PDTS are described conceptually. The timing information control which is also important and necessary to interpret the received image data is described.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.25-30
• /
• 1994

We derive a set of formuale which show one-to-one correspondence between the the unitary Jones matrices of transparent anisotropic media and the rotational transformations on the Poincare sphere. By using the formuale one can determine the vectorial representation of the rotational transformation on the Poincare sphere which specifies the direction of the axis and the angle of the rotation in terms of the three parameters specific to the corresponding unitary Jones matrix, and conversely the the three parameters of the uniatry Jones matrix in terms of the vectorial representation of the corresponding rotational transformation on the Poincare sphere. To understand the polarization transmission characteristics of an optical system consisting of transparent linear anisotropic media, start with the Jones calculus to get the unitary Jones matrix for the whole system and then convert it to a rotational transformation on the Poincare sphere, from which we can intuitively understand the effect of the optical system on the polarization state of the light passing through the system.

• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.547-557
• /
• 2005

In this paper, we investigate the packet delay distribution of a dynamic bandwidth allocation(DBA) scheme in an Ethernet passive optical network(EPON). We focus on the gated-exhaustive vacation system. We assume that input packets arrive at an optical network unit(ONU) according to general interarrival distribution. We use a discrete time queueing model in order to find the packet delay distribution of the gated-exhaustive system with the primary transmission queue and the secondary input queue. We give some numerical examples to investigate the mean packet delays of the proposed queueing model to analyze the DBA scheme in an EPON.

• Information and Communications Magazine
• /
• v.28 no.12
• /
• pp.50-60
• /
• 2011

Visible light communication(VLC) is one type of short-range, optical, and wireless communication system utilizing light emitting diode(LED) and laser diode(LD) as optical source. In a VLC system, visible light is used as a transmission medium and used to illuminate. Using VLC has a lot of advantages: it is harmless to human body; it transmits with high power, and it has excellent security, a high data rate, and a license free frequency band. With such a unique blend of communication and illumination in one system, the most common application would be an indoor environment. We aim at reviewing key issues in VLC network such as : FOV(field of view), priority MAC, cooperative MAC, link switching, LED-ID technique, cell site diversity, and link recovery.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.6-13
• /
• 1998

To constoruct a multi-channel system like Optical Frequency Division Multiplexing (OFDM) with the vast amount of transmission capability, a frequency stabilization is essential technique for getting narrower channel spacing and for minimizing fluctuation of oscillation frquency of each channel. This paper proposes a novel multi-channel optical frequency stabilization scheme that uses wavelength crossover properties of a Arrayed Waveguide Grating(AWG). The proposed scheme includes an effective control algorithm that carries out frequency stabilization of all channels through a simple control circuit, simulaneously. And also, a design method of AWG is included which has higher resolutio in consideration of system loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.899-906
• /
• 1997

It is known that the Differential Phase Shift Keying (DPSK) modulation scheme in the coherent optical communication system is suitable for design of long-distance transmission system because its receiver performance is 3-5dB better than ASK and FSK. In this paper, we descrive a fundamental understanding of the effects of laser phase noise on the performance of coherent lighwave communication systems. Formulas are derived for the bit error rate in homodyne and heterodyne DPSK. Based on detailed mathematical analysis and estimates, we explain the following finding. DPSK can operates at rates only 300 times greater than the laser linewidth.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.128-132
• /
• 2007

Thermal Imaging systems are reported to be crucial for fire fighting and beginning to be used by fire fighters. The performance of thermal imaging system is determined by both the radiation of infrared from the target and the attenuation of infrared signal in the optical path by the absorption, scattering, diffraction and reflection. In the scene of fire, water drops with various sizes such as vaporized water, wafer mist from sprinkler, and wafer to suppress the fire reside with various gas generated by burning. To measure the transmission of infrared radiation in the scene of fire, fire simulating system and thermal imagers with cooled detector which detects $3{\sim}5{\mu}m$ infrared and uncooled detector fabricated by the MEMS technology which detects $8{\sim}12{\mu}m$ infrared. are made. With thermal imagers and Ire simulating system, the change of thermal image with respect to the change of visibility controlled with the burned fas was measured. It was found that the transmission of infrared was not reduced by the burned gas, which could be explained by the long wavelength of infrared ray compared with visible ray. However, the transmission of infrared ray was largely reduced by the combination of burned gas and water mist supplied by sprinkler. This is contrary to the results of calculated transmission through the pure water mist and shows that the transmission of infrared ray is mostly affected by the compounds of water mist and burned gas. In this case, it was found that the uncooled detector which detects $8{\sim}12{\mu}m$ infrared ray is better than cooled detector which detects $3{\sim}5{\mu}m$ infrared ray for fire fighting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2466-2472
• /
• 2013

Post-dispersion compensation methods for the 3000 km long-haul transmission distance using 10 Gbps 40 wavelength division multiplexing channels were analyzed and compared. First, each channel was compensated by an individual dispersion value, next each group of eight channels by an individual value, and lastly all forty channels by a single value. Considering the lower and highest performance channels and their values, the post-dispersion compensation method by each channel group showed the possibility to simplify the transmission system without sacrifice of signal performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.168-177
• /
• 2005

In this paper, we numerically investigated the optimum pump light power resulting best compensation of pulse distortion due to both chromatic dispersion and self phase modulation (SPM) in long-haul 3×40 Gbps wavelength division multiplexing (WDM) systems. We used mid-span spectral inversion (MSSI) method with path-averaged intensity approximation (PAIA) as compensation approach, which have highly nonlinear dispersion shifted fiber (HNL-DSF) as nonlinear medium of optical phase conjugator (OPC) in the mid-way of total transmission line. We confirmed that HNL-DSF is an useful nonlinear medium in OPC for wideband WDM transmission, and in order to achieve the excellent compensation the pump light power is selected to equal the conjugated light power into the latter half fiber section with the input light power of WDM channel depending on total transmission length. Also we confirmed that compensation degree of WDM channel with small conversion efficiency is improved by using pump light power increasing power conversion ratio upper than 1.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.135-139
• /
• 2017

In recent years, the optical fiber laser has been widely used in industrial fields due to its excellent economical efficiency and its suitability for industrial applications. This usage has increased even further since the KW class Laser was developed. In this paper, structural analysis and heat transfer analysis of a 500W class optical fiber laser end cap module was performed. The stability of end cap housing with the efficient heat dissipation structure of a 500W-class end cap was evaluated. This research determined the optimal design that should be applied to the design and evaluation of future KW class laser output modules.