• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.388-399
• /
• 2003

Light losses in optical fibers are investigated by a fiber optic OTDR (Optical Time Domain Reflectometry) sensor system to develop fiber optic probes for structural strain measurement. The sensing fibers are manufactured 3 kinds of fibers: one is single mode fiber, and second is multimode fiber, and the third is low-cladding-index fiber. Fiber bending tests are performed to determine the strain sensitivity according to the strain of gage length of optical fibers. In the result of this experiments, the strain sensitivity of the single mode fiber was shown the highest value than others. The fiber optic strain probe was manufactured to verify the feasibility of the structural strain measurement. In this test, the fiber optic strain probe of the OTDR sensor could be easily made by the single mode fiber.

• 정보저장시스템학회논문집
• /
• 제7권2호
• /
• pp.75-79
• /
• 2011

Recently mobile phone camera become generally spread, it is required to develop high resolution, multi-functional camera module for obtaining high image quality. To satisfy this demand, number of pixels has been increased and pixel size decreased in small mobile phone cameras. As a result, image quality is seriously dropped by blur phenomena. Especially when hand tremble is occurred, image quality is dropped by camera shake. Therefore, to obtain high quality image, it is necessary to compensate user's hand tremble. In this paper, we propose voice coil actuator for compensating hand tremble, which can apply optical image stabilization (OIS) system. Sensitivity analysis and size optimization are performed to obtain high driving force. Finally, it is confirmed that the optimized electromagnetic circuit can be applied in OIS system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.372-375
• /
• 2005

The tracking performance of optical disk drive(ODD) system can be improved using disturbance observer(DOB). But, DOB was not easily applied in the ODD system because the additional microprocessor was needed. In this paper, we propose an error-based modified disturbance observer(EM-DOB) for ODD system. Due to the simplified structure of EM-DOB, the system is easily implemented to the digital control algorithm or the analog circuit. In these algorithms, disturbances rejection performance of system can be tuned as Q filter parameters are selected. Based on analysis of sensitivity function, three guidelines of Q filter design are suggested. Experimental results of DOB and EM-DOB are evaluated under the forced disturbances.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.385-389
• /
• 2003

To make high speed spindle system work properly, sensors with outstanding resolution and dynamic characteristics are essential. An optical fiber displacement sensor is based on simple principles. Electrical signal responds to the optical flux change due to the displacement change between a target and a sensor probe. In this paper, the performance of optical fiber displacement sensor has been investigated according to properties of optical fiber Firstly, optical loss has been measured before and after polishing optical fiber endface. Secondly, allowance of optical fiber bending has been tested. thirdly sensitivity and linear range of the sensor has been found out according to the shape of cross section of optical fiber.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.19-23
• /
• 2006

Latching optical switches and optical logic gates AND and OR are demonstrated, for the first time, by the monolithic integration of a vertical cavity lasers with depleted optical thyristor structure, which have not only a low threshold current with 0.65 mA. but also a high on/off contrast ratio more than 50 dB. By simple operating technique with changing a reference switching voltage, this single device operates as two logic functions, optical logic AND and OR. The thyristor laser fabricated using the oxidation process achieved a high optical output power efficiency and a high sensitivity to the optical input light.

• Journal of Astronomy and Space Sciences
• /
• 제31권3호
• /
• pp.241-246
• /
• 2014

The Amon-Ra instrument is the main optical payload of the proposed EARTHSHINE satellite. It consists of a visible wavelength instrument and an IR energy channel instrument to measure a global Earth albedo. We report a new sensitivity technique for efficient alignment of the visible channel instrument. Whilst the sensitivity table method has been widely used in the alignment process, the straightforward application of the method tends to produce slow process convergence because of shop floor alignment practice uncertainties. We investigated the error sources commonly associated with alignment practices and used them when estimating the Zernike polynomial coefficients. Aided with single center field wavefront error (WFE) measurements and their corresponding Zernike polynomial coefficients, the method involves the construction and use of an experimental, instead of simulated, sensitivity table to be used for alignment state estimations. A trial alignment experiment for the Amon Ra optical system was performed and the results show that 71.28 nm in rms WFE was achieved only after two alignment iterations. This tends to demonstrate its superior performance to the conventional method.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.109-120
• /
• 2005

본 논문에서는 MSSI 보상 기법을 채택한 1,200 km의 WDM 전송 시스템에서의 비트 에러율, 수신 감도, 입사 전력 최소 허용치를 증폭기 간격에 따라 수치적으로 살펴보았다. 변조 파형 형식에 관계없이 수신 감도와 입사 전력 최소 허용치 모두 증폭기 간격이 증가할수록 나빠지는 것을 알 수 있었다. 수신 감도 측면에서는 NRZ 전송보다 RZ 전송을 하는 경우 감도를 개선할 수 있었지만 실제 입사 전력 허용치 면에서는 NRZ가 RZ 전송보다 유리한 것을 확인하였다. 아울러 증폭기 간격을 50 km 이하로 해야만 수신 감도와 입사 전력 최소 허용치 모두 분산 계수, 채널 파장, 펌프광 전력에 비교적 영향을 적게 받는 것을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제15권11호
• /
• pp.976-980
• /
• 1994

The sensitivity factors and the error propagation factors are defined for the three-parameter ellipsometry (TPE). The sensitivity factor is useful for understanding the nature of the TPE measurements in connection with determination of the optical properties and the thickness of a film. On the other hand, the error propagation factors provide a quantitative tool for predicting the optimum condition for TPE experiments. Their usefulness is demonstrated for the passive film formed on nickel in aqueous solution.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2790-2798
• /
• 2024

In this research, thermoluminescent pellets were prepared by adding Mg, Cu, Na and Si impurities to lithium fluoride (LiF) crystal powder via melting and quenching methods to study dosimetric characteristics. Here, its reproducibility, dose response, dosimeter sensitivity, thermal and optical fading were investigated and the obtained results were compared with the properties of LiF: Cu, Mg, P crystal nominated as GR-200.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.693-698
• /
• 2008

For designing intensity modulation type optical microphone, the irradiance distribution which can be applied to inclined-cut geometrical configuration is suggested. The model is important in analysis of response characteristics f3r intensity modulation type optical microphone. To overcome low sensitivity problem in intensity modulation type optical microphone, inclined-cut optical fiber is considered here. Based on optical geometry, the inclined-cut optical fiber sensor is designed and fabricated. The experiments are carried out to evaluate sensor performance.