• Current Optics and Photonics
• /
• 제4권3호
• /
• pp.186-192
• /
• 2020

This paper describes a real-time monitoring system in Ethernet passive optical networks (EPON) that uses burst-mode fiber Bragg grating (FBG) optical sensors. The FBG interrogation unit in the optical line terminal (OLT) transmits the monitoring wavelength to optical network units (ONUs). The FBG sensor unit in each ONU returns a burst-mode monitoring signal to the OLT. As the system applies time division multiple access (TDMA), a uniform Bragg wavelength can be used to monitor the EPON system. The FBG interrogation unit analyzes the received burst-mode monitoring signals and outputs fault information on the ONU branches in EPON. The simulation results show the effectiveness of the proposed monitoring system based on TDMA. In addition, we compared the proposed TDMA-based monitoring system with a WDMA-based monitoring system.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.77-83
• /
• 2012

Since power system is switching to smart grid, on-line monitoring technology has become necessary for underground distribution power cable. Therefore, the application of DTS(Distributed Temperature Sensing) technology using OFCPC(Optical Fiber Composite Power Cable) capable of monitoring underground distribution power cables has been developed. These can bring about reductions in faults and increases in operating capacity of underground distribution system. To date, the test-bed of optical fiber composite power cable on-line monitoring system has been constructed. Then, matters to be improved have been drawn through verification experiments. This paper presents the improvement and experiment results of the optical fiber composite power cable on-line monitoring system to apply to underground distribution lines in the field.

• 한국레이저가공학회지
• /
• 제4권2호
• /
• pp.29-38
• /
• 2001

A development of in-process and reliable monitoring system in laser materials processing is essential for successful applications toward the real industrial fields. It was known that optical signals induced by laser-matter interactions provide a good indication not only to monitor various defects but also to characterize and identify the process However there are still difficulties to implement the optical monitoring system in real fields since the system is susceptible to the spurious change of the signal affected by the variation of experimental conditions and environmental noises. In this article. a new type of optical monitoring technique named 'chromatic modulation technique' is described as a reliable, robust and sensitive monitor for the applications in laser materials processing in order to tackle the conventional problems in optical system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.560-563
• /
• 2012

향후 대용량 정보 제공 서비스를 위한 크루즈 선박 등의 특수 선박용 광 네트워크 모니터링 시스템의 하드웨어와 소프트웨어를 설계 제작하였고, 개발된 광 네트워크 감시 시스템이 선박이라는 특수 상황과 관련있는 이물질이 부착된 광 커넥터, 오접속된 커넥터에 의한 손실 등 2가지의 이벤트를 정확히 모니터링하는지를 실험을 통해 확인해 보았다. 모니터링 시스템의 하드웨어는 선박의 네트워크 구조에 맞는 chained branch와 dark fiber 병합 방식으로 설계 제작하였고, 2가지 이벤트에 대한 감시 시험 결과 3가지 모두 5 m 이내의 범위로 모니터링하는 것을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.166-169
• /
• 2008

The submersion monitoring system based on a reflective side-polished optical fiber submersion sensor with an optical fiber mirror was shown to be an effective alarm system with remote monitoringwhen the drainage capacity of a common utility duct is exceeded due to heavy rainfall. The proposed sensor was connected to an existing installed optical fiber network at a height of 250mm in a common utility duct, and then tested under sample materials(distilled water, river water, sea water, foul water, muddy water, petroleum, edible oil) at a distance of 1km from the sensor for remote sensing. In experiments, the proposed real-time sensor system reduced maintenance cost and improved monitoring efficiency by using a reflection-type side-polished optical fiber submersion sensor efficient for remote monitoring of a common utility duct.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.86-91
• /
• 2012

A multi purpose environmental monitoring system has been developed as a commercially available standard using the techniques which are FBG(Fiber Bragg Grating), Hetero-core spliced fiber optic sensor and etc, for the purposes of monitoring large scaled structures and preserving natural environments. The monitoring system has been tested and evaluated in a possible outdoor condition in view of the full scaled operation at actual sites to be monitored. Additionally, the developed systems in the previous works conveniently provided us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. In this paper, we extend the previous results to a water leakage detection problem and develop a sensing system as a result. By the experimental study, it is verified that multi-point leakage detection is possible using single line optical fiber.

• 한국통신학회논문지
• /
• 제39A권6호
• /
• pp.357-364
• /
• 2014

본 논문은 반사필터를 사용하여 FTTH-PON의 원격제어 시스템을 다루고 있다. 기존의 FTTH-PON방식은 광케이블 고장과 수동분기소자(Splitter)의 품질 저하가 발생하는 것을 실시간 인지 할 수 없다. 본 연구에서는 이를 해결하기 위해서 광섬유 브래그 격자 원리를 이용한 반사필터를 개발하여 간선망과 Splitter를 감시 할 수 있게 하였다. 반사필터는 광케이블 밴딩, 커넥터 상태와 스플리터의 품질이 점진적으로 저하되는 것을 모니터링 하고 광케이블 고장, 수동 광분배기(Splitter) 등의 고장 위치를 확인하여 OLT측에 경보를 보내서 중앙관제에서 감시할 수 있는 시스템이다. 즉, 기존 통신 국사 측 파장분기 결합부(Coupler)를 이용해 1개의 광심선으로 live 파장과 감시용 파장을 2개로 보내어 가입자 측 장치인 모뎀과 집선 스위치에 반사필터를 사용하여 원격으로 광선로를 감시하는 시스템에 관한 연구이다. 이러한 반사필터의 개발로 인해 광선로 평균 고장처리 시간 단축과 효율적 유지보수를 할 수 있을 것으로 기대한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.262.2-262.2
• /
• 2014

Plasma processing is an essential process for pattern etching and thin film deposition in nanoscale semiconductor device fabrication. It is necessary to maintain plasma chamber in steady-state in production. In this study, we determined plasma chamber state with residual gas analysis with self-plasma optical emission spectroscopy. Residual gas monitoring of fluorocarbon plasma etching chamber was performed with self-plasma optical emission spectroscopy (SPOES) and various chemical elements was identified with a SPOES system which is composed of small inductive coupled plasma chamber for glow discharge and optical emission spectroscopy monitoring system for measuring optical emission. This work demonstrates that chamber state can be monitored with SPOES and this technique can potentially help maintenance in production lines.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.705-706
• /
• 2014

이 논문에서는 XG-PON (10-Gbps-capable passive optical network) 시스템에 대한 새로운 동적대역할당 알고리즘을 제안한다. 이 논문에서 고려하는 XG-PON 시스템에서는 ONU (optical network unit)가 명시적으로 전송요청을 OLT (optical line termination)로 보내지 않는다. OLT는 ONU의 상향 대역폭 사용량을 monitoring하여 ONU의 전송허가량을 추측하고 이를 바탕으로 동적대역할당을 실시한다.

• 센서학회지
• /
• 제28권5호
• /
• pp.294-298
• /
• 2019

Pulsed laser-based optical sensor monitoring systems for real time microplastic particle counting are proposed and developed in this study. To develop our real time monitoring system, we used a 450 nm pulsed laser and a photomultiplier with very high quantum efficiency. First, we demonstrated that the microplastic particle counting system could detect standard micro bead samples of 100, 250, and $500{\mu}m$ in river water. We then performed research concerning pulsed laser-based optical spectral sensor systems for real time microplastic monitoring. Additionally, we demonstrated that the real time microplastic remote monitoring system using LoRa communications could detect microplastic in the tap water resource protection area.