• Journal of Astronomy and Space Sciences
• /
• v.36 no.4
• /
• pp.249-264
• /
• 2019

In this study, the precise orbit determination (POD) software is developed for optical observation. To improve the performance of the estimation algorithm, a nonlinear batch filter, based on the unscented transform (UT) that overcomes the disadvantages of the least-squares (LS) batch filter, is utilized. The LS and UT batch filter algorithms are verified through numerical simulation analysis using artificial optical measurements. We use the real optical observation data of a low Earth orbit (LEO) satellite, Cryosat-2, observed from optical wide-field patrol network (OWL-Net), to verify the performance of the POD software developed. The effects of light travel time, annual aberration, and diurnal aberration are considered as error models to correct OWL-Net data. As a result of POD, measurement residual and estimated state vector of the LS batch filter converge to the local minimum when the initial orbit error is large or the initial covariance matrix is smaller than the initial error level. However, UT batch filter converges to the global minimum, irrespective of the initial orbit error and the initial covariance matrix.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.57-63
• /
• 1999

The optical absorption and transmittance of cow' crystalline were measured by spectrophotometer in the 200~800nm wavelength regions. The optical absorptions of crystalline composed of a high absorption band in the UV-A, UV-B, and appeared the light transmittance edge in the 400nm wavelength region, and completely transmitted without the absorption in the high wavelength regions than 400nm. Also, the optical absorption and transmittance had no temperature dependence. The optical transmittance spectrum of crystalline concord with the thin film structure of $n_0/(0.5H)L(LH)^6(0.5H)/n_s$ and $n_0{\mid}(0.5LH0.5L)^kL/1.25{\mid}4.0$ of long-pass edge filter form. In the artificial crystalline and inter lens layout, long-pass edge filter layout can UV cut off.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.218-222
• /
• 2009

In this paper, we report the optical and structural properties of a bilayer circular filter fabricated by a glancing angle deposition technique. The bilayer circular filter is realized by a two-layer $TiO_2$ helical film with layers of opposite structural handedness. It is found that the bilayer circular filter reflects both right and left circularly polarized light with wavelength lying in the Bragg regime. The microstructure of the bilayer circular filter is also investigated using a scanning electron microscope.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.203-206
• /
• 2003

Thermo-optic tunable filter, with 4-pairs of H/L layers for DBR, was designed and fabricated. The transmittance characteristics of the filter were measured. Additionally, heating system and temperature sensor system were used in order to observe property of the filter by thermo-optic effect. The tuning efficiency of the filter was measured to be 0.144nm/K$^{-1}$ showing the tuning range of 9.4nm for the temperature variation of 64.7$^{\circ}C$. Filter, lens and fiber were aligned by micro-optical bench.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.657-662
• /
• 2003

The OPM(optical performance monitoring module) is needed in order to monitor optical performance. the most importance of OPM is to measure the wavelength of optical signal. In the past time, it was very difficult to get the wavelength value because they used pilot tone. Since then, using AWG(arrayed waveguide grating) and AOTF(acousto optic tuneable filter), the wavelength and the transmission qualify for multi channel signal have been monitored. In this paper, we chose the fiber fabry-perot wavelength variable filter which be evaluated for optical resolution ability to excellent, so that FBG(fiber bragg grating) was used for setting reference wavelength because chose a wavelength variable filter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.969-971
• /
• 2002

In this paper, we study the performances of optical system design using the 1 panel LCD without color filter for projection color television. We analyze the optical efficiency compare this system with 1 panel LCD system using the color filter, and work out a constraint condition of 1 panel LCD without color filter for optical design. We design a high brightness 1 panel optical system using a complex reflection mirror and suggest a method of the optical system design.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.166-175
• /
• 2023

We theoretically analyze and experimentally demonstrate a polarization-diversified four-channel optical demultiplexer (DeMUX) comprising a hybrid mode conversion-type polarization splitter rotator (PSR) and delayed Mach-Zehnder interferometer optical DeMUX for use in coarse wavelength division multiplexing (CWDM)-based optical interconnect applications. The Si wire-based device fabricated by a complementary metal-oxide semiconductor-compatible process exhibited nearly the same filter spectral response irrespective of the input polarization state under the PSR. The device had an extremely low insertion loss of <1.0 dB, polarization-dependent loss of <1.0 dB, and interchannel imbalance of <0.5 dB, suppressing unwanted wavelength and polarization crosstalk from neighboring channels of <-20 dB at each peak transmission channel grid.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.306-311
• /
• 2003

In this paper, we modeled the incident beam in order to analyze and evaluate the optical thin film device for wavelength division multiplexing in optical telecommunication network. As applied ray tracing method to the optical path, we were compared the accuracy of coupling efficiency simulated by two modeling methods. In the results of sinulation, ceil modeling method was preferred to annual modeling method in micro-optic device because of accuracy for coupling efficiency and Gaussian intensity distribution. In the results of optimal simulation for optical device using thin film filter, the distance (d1) between optical fiber and GRIN lens, the distance (d2) between GRIN lens and thin film filter and the coupling efficiency were 0.24 mm, 0.25 mm and -0.11 ㏈ respectively. As d2 was displaced at 0.25 mm and d1 was varied in order to evaluate the optimal value, d1 and maximum coupling efficiency were 0.24 mm and -0.35㏈, respectively. Then the results of experiment were corresponded to that of optimal simulation by cell modeling and it was possible to analyze the performance for optical device using thin film filter by the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.105-111
• /
• 2000

To realize a desired characteristics of an optical transversal fitters, The number of optical amplifiers as same as the lentgh of a given transfer function is needed In this paper, we consider an optical transversal filter that uses only one fiber amplifier, which can realize a constant(=$\alpha$) times of a given transfer function with e as large as possible in order to make use of optical signal energy. We also present some applications using this optical fiber filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.392-400
• /
• 1997

In this paper we porposed WCHF-fSDF filter to obtain a roration and scale-invariant correlation output. WCHF-fSDF filter is synthesized by each single CHF exttracted from scale-changed and wavelet tranformed imagesfor a refereence image as tranining images. The wavelet transform is defined as the correlation of an input image with a wavelet function. Therefore two 4f optical correlation systems are needed for pattern recognition using wavelet transform. We here include the wavelet function for the input image in the process of the proposed filter design and substitute the two 4f optical correlation system with a single 4f optical correlation system. The Performances of the proposed filter are compared with conventional CHF-SDF, POCHF-SDF filters through the computer simulation. The results of computer simulation show that the proposed filter has the rotation and scale-invariant correlation output and it has better performances than thoseof the conventioanl filters.