• Corrosion Science and Technology
• /
• 제11권5호
• /
• pp.191-195
• /
• 2012

The aim of this study was to investigate effects of hafnium content on the corrosion behavior of Ti alloys in electrolyte containing chloride ion. For this study, Ti-Hf binary alloys contained 10 wt%, 20 wt% and 30 wt% Hf were manufactured in a vacuum arc-melting furnace and subjected to heat treatment for 12h at $1000^{\circ}C$ in an argon atmosphere. The pitting corrosion behavior of the specimens was examined through potentiodynamic and potentiostatic tests in 0.9 wt% NaCl electrolyte at $36.5{\pm}1^{\circ}C$. The corrosion morphology of Ti-xHf alloys was investigated using optical microscopy (OM) and X-ray diffractometer (XRD). From the optical microstructures and XRD results, needle-like martensite ($\alpha$') phases of the Ti-xHf alloys increased with an increase of Hf addition. Corrosion current density $(I_{corr})$ and current density $(I_{300mV})$ in passive region decreased, whereas, corrosion potential increased with Hf content. At the constant potential ($300mV_{SCE}$), current density decreased as time increased.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.547-550
• /
• 1999

Optical and electrical properties of MgO-CaO films as a protective layer for AC plasma display panel were studied. When the [(CaO/(MgO+CaO)] ratio of evaporation starting materials was optimum composition, 0.1, firing voltage and memory margin of the film were 176V and 0.5, respectively. When [CaO/(CaO+MgO)] was 0, 0.1 and 0.2, memory margin was 0.39, 0.5 and 0.41, respectively, and surface roughness of films was $27.7\AA$, $21.1\AA$ and $40.3\AA$, respectively. It was thought that memory margin had a reverse-relation with surface roughness. The density of film was calculated by measuring the refractive index of film. The density of MgO film was 3.21g/㎤ and the density of film, when [CaO/(CaO+MgO)] was 0.1, was 3.632g/㎤. The mixture of MgO-CaO films showed a good transmittance property in the visual range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.422-424
• /
• 1986

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2001년도 하계 학술대회 논문집
• /
• pp.287-292
• /
• 2001

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2004년도 하계학술논문발표회 논문집
• /
• pp.32-38
• /
• 2004

• 소성∙가공
• /
• 제13권1호
• /
• pp.39-44
• /
• 2004

Transcribability of pit or land groove structures in replicating an optical disk substrate greatly affects the performance of a high-density optical disk. However, a solidified layer, generated during the polymer filling, deteriorates transcribability because the solidified layer prevents the polymer melt from filling the sub-micro patterns. Therefore, the development of the solidified layer during filling stage of injection molding must be delayed. For this delay, passive heating by insulation layer has been used. In the present study, to examine the development of the solidified layer delayed by passive heating, the flow of polymer melt with passive heating was analyzed. Passive heating markedly delayed the development of the solidified layer, reduced the viscosity of the polymer melt, and increased the fluidity of the polymer melt in the vicinity of the stamper surface with the sub-micro patterns. As a result, we predict that passive heating can improve transcribability of an optical disk substrate. To verify our prediction, we fabricated an optical disk substrate by using passive heating of a mold and measured the transcribability of an optical disk substrate.

• 전자공학회논문지A
• /
• 제28A권9호
• /
• pp.721-728
• /
• 1991

In this paper, a magneto-optic modulator has been designed by using single crystal BSO and polycrystal ZnSe as Faraday cells. And practical core-type optical current sensors using pure iron and permalloy have been prepared and experimented. In order to obtain efficient magnetic field detection, LED(NEC OD08358, 0.87 $\mu$m) was used as optical source, PIN-PD(OD-8454)as optical receiver and multi-mode optical fiber (100/140$\mu$m) as transmission line. The characteristics matrix of the optical element was calculated by Stokes parameter, and optic modulation characteristics equations were derived by Muller matrix. Electromagnetic analysis program (FLUX 2D, micro VAX 3600) by finite element method was used to find the magnetic flux density around the core. The measuring error of the output voltage to input current has been masured below 5% in the range of 50A to 1000A. As the temperature was changed from -20$^{\circ}C$ to 60$^{\circ}C$, the maximum measurement error of the optical output has been found to be 0.5% at 60$^{\circ}C$. These experimental results show good temperature and linearity characteristics. The SNR of the overall system was 47dB in case of 600A (250.2 Oe) conductor current and the system has good noise immunity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.269-272
• /
• 2008

LGP is a key component of LCD back light unit because it determines the brightness and sharpness of display image. Usually, it has optical patterns fabricated on the bottom surface. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme helped find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• 열처리공학회지
• /
• 제8권3호
• /
• pp.169-181
• /
• 1995

This study has been performed to investigate some effects of the power density and traverse speed of laser beam on the optical microstructure, hardness and fatigue resistance of gray cast iron treated by laser surface hardening technique. Optical micrograph has shown that the dissolution of graphite flakes and the coarsening of lath martensite tend to increase with a small amount of retained austenite as the power density increases under the condition of a given traverse speed. Hardness measurements have revealed that as the power density increases, hardness values of outermost surface layer increases from Hv=620 to Hv=647 in case of traverse speed of 2.0m/min at gray cast iron. Fatigue test has exhibited that the fatigue strength of laser surface hardened specimen is superier compared to that of untreated specimen, showing that values for the fatigue strength at $N_f=10^7$ of gray cast iron laser-surface-hardened at a low power density of $4076w/cm^2$ and a high power density of $8153w/cm^2$ under the condition of a given traverse speed of 2.0m/min are $15kg_f/mm^2$ and $20kg_f/mm^2$, respectively, whereas the fatigue strength of untreated specimen is $11kg_f/mm^2$. Under high stress-low cycle condition a noraml brittleness fracture appears, whereas a ductile fracture with beach mark is observed in the specimen tested under low stress-high cycle condition.

• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.444-448
• /
• 2002

A $CaCO_3$-alginate beads system was developed for high cell density cultivation of Bifidobacterium longum and the cost-effective media were also screened. In batch process with $CaCO_3$, beads, two strains of B. longum showed both the highest viable cells and optical density in TPY medium, resulting in maximum optical density and viable cell counts of 12.40, $2.22{\times}10^10$ cfu/ml for B. longum ATCC 15707 and 13.71, $3.93{\times}10^10$ cfu/ml for B. longum HLC 3742. Released size distribution, according to $CaCO_3$-alginate bead size preparation, was smaller than others. These results were also examined by observing their morphology. The skim milk-based medium was most adequate to cultivate B. longum as the cheapest medium, and $10\%$ skim milk supplemented with $2\%$ glucose and $1\%$ yeast extract was a suitable medium, supporting the growth to $5.57{\times}10^10$ cfu/ml for ATCC 15707 and $6.82{\times}10^9$ cfu/ml for HLC 3742. During the long-term storage at $4^{\circ}C\;and\;-20{\circ}C$, B. longum cultivated with $CaCO_3$ beads had the highest stability. Consequently, $CaCO_3$-alginate beads buffer was found to be useful not only to cultivate B. longum but also to preserve cultures.